Using 3-D printing and novel semiconductors, researchers at the Department of Energy’s Oak Ridge National Laboratory have created a power inverter that could make electric vehicles lighter, more powerful and more efficient.
At the core of this development is wide bandgap material made of silicon carbide with qualities superior to standard semiconductor materials. Power inverters convert direct current into the alternating current that powers the vehicle. The Oak Ridge inverter achieves much higher power density with a significant reduction in weight and volume.
“Wide bandgap technology enables devices to perform more efficiently at a greater range of temperatures than conventional semiconductor materials,” said ORNL’s Madhu Chinthavali, who led the Power Electronics and Electric Machinery Group on this project. “This is especially useful in a power inverter, which is the heart of an electric vehicle.”
Specific advantages of wide bandgap devices include: higher inherent reliability; higher overall efficiency; higher frequency operation; higher temperature capability and tolerance; lighter weight, enabling more compact systems; and higher power density.
Additive manufacturing helped researchers explore complex geometries, increase power densities, and reduce weight and waste while building ORNL’s 30-kilowatt prototype inverter.
“With additive manufacturing, complexity is basically free, so any shape or grouping of shapes can be imagined and modeled for performance,” Chinthavali said. “We’re very excited about where we see this research headed.”
Using additive manufacturing, researchers optimized the inverter’s heat sink, allowing for better heat transfer throughout the unit. This construction technique allowed them to place lower-temperature components close to the high-temperature devices, further reducing the electrical losses and reducing the volume and mass of the package.
Another key to the success is a design that incorporates several small capacitors connected in parallel to ensure better cooling and lower cost compared to fewer, larger and more expensive “brick type” capacitors.
The research group’s first prototype, a liquid-cooled all-silicon carbide traction drive inverter, features 50 percent printed parts. Initial evaluations confirmed an efficiency of nearly 99 percent, surpassing DOE’s power electronics target and setting the stage for building an inverter using entirely additive manufacturing techniques.
The Latest on: Additive manufacturing
[google_news title=”” keyword=”Additive manufacturing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Additive manufacturing
- HBD launches medium-sized six-laser HBD 400 metal Additive Manufacturing machineon May 7, 2024 at 5:33 am
HBD has added the HBD 400 to its medium-sized line of Laser Beam Powder Bed Fusion (PBF-LB) Additive Manufacturing machines.
- VDMA survey highlights resilience and growth expectations in Additive Manufacturingon May 7, 2024 at 5:30 am
VDMA has released the results of its 2024 spring survey, with only a third of companies reporting a decline in sales for the period.
- This gigantic 3D printer could reinvent manufacturingon May 7, 2024 at 2:00 am
A massive additive manufacturing device that can build houses, and a whole lot more has just been unveiled at the University of Maine.
- Additive manufacturing could turn the tides for marine energy technologieson May 6, 2024 at 11:28 am
Milk and cookies. Peanut butter and jelly. Macaroni and cheese. All delightfully perfect pairs. Researchers at the National Renewable Energy Laboratory (NREL) discovered another promising pair: marine ...
- Ingersoll Rand Leads $19M Financing Round for Inkbit to Advance Multi-Functional Additive Manufacturingon May 6, 2024 at 10:56 am
Inkbit™, a pioneer in advanced additive manufacturing solutions, announced today the closing of a $19M financing round led by Ingersoll Rand (NYSE: IR), with participation from Future Labs Capital, GC ...
- Understanding Additive Manufacturing Processeson May 2, 2024 at 4:08 am
This article presents a basic overview of how additive manufacturing (AM) processes work, offering context for material characterization requirements by highlighting the main features of the ...
- The Characterization of Additive Manufacturing Powderson May 2, 2024 at 2:10 am
This article discusses the chemistry of additive manufacturing (AM) powders and the chemical analysis of raw ingredients, recycled materials, and feedstocks. To physically characterize these powders, ...
- State issues $600,000 in grants for additive manufacturing technologyon May 1, 2024 at 7:56 am
Governor Ned Lamont announced on the morning of May 1 that Connecticut is providing six businesses with $100,000 grants to ...
- SPEE3D PARTNERS WITH NEW JERSEY INNOVATION INSTITUTE (NJII) TO BRING COLD SPRAY ADDITIVE MANUFACTURING TECHNOLOGY TO STUDENTS AND MILITARYon April 30, 2024 at 2:00 am
Newark, New Jersey, April 30, 2024 (GLOBE NEWSWIRE) -- SPEE3D, a leading metal additive manufacturing company, announced they are working with New Jersey Innovation Institute (NJII) to bring Cold ...
- New report forecasts semiconductor future in additive manufacturingon April 29, 2024 at 7:14 pm
A new study outlines the potential for additive manufacturing technologies to optimise the capabilities of the semiconductor industry.
via Bing News