Advances in supercapacitor technology could lead to wider use of fast-charging energy storage devices and novel designs for electronic gadgets
Scientists at UC Santa Cruz and Lawrence Livermore National Laboratory (LLNL) have reported unprecedented performance results for a supercapacitor electrode. The researchers fabricated electrodes using a printable graphene aerogel to build a porous three-dimensional scaffold loaded with pseudocapacitive material.
In laboratory tests, the novel electrodes achieved the highest areal capacitance (electric charge stored per unit of electrode surface area) ever reported for a supercapacitor, said Yat Li, professor of chemistry and biochemistry at UC Santa Cruz. Li and his collaborators reported their findings in a paper published October 18 in Joule.
As energy storage devices, supercapacitors have the advantages of charging very rapidly (in seconds to minutes) and retaining their storage capacity through tens of thousands of charge cycles. They are used for regenerative braking systems in electric vehicles and other applications. Compared to batteries, they hold less energy in the same amount of space, and they don’t hold a charge for as long. But advances in supercapacitor technology could make them competitive with batteries in a much wider range of applications.
In earlier work, the UCSC and LLNL researchers demonstrated ultrafast supercapacitor electrodes fabricated using a 3D-printed graphene aerogel. In the new study, they used an improved graphene aerogel to build a porous scaffold which was then loaded with manganese oxide, a commonly used pseudocapacitive material.
A pseudocapacitor is a type of supercapacitor that stores energy through a reaction at the electrode surface, giving it more battery-like performance than supercapacitors that store energy primarily through an electrostatic mechanism (called electric double-layer capacitance, or EDLC).
“The problem for pseudocapacitors is that when you increase the thickness of the electrode, the capacitance decreases rapidly because of sluggish ion diffusion in bulk structure. So the challenge is to increase the mass loading of pseudocapacitor material without sacrificing its energy storage capacity per unit mass or volume,” Li explained.
The new study demonstrates a breakthrough in balancing mass loading and capacitance in a pseudocapacitor. The researchers were able to increase mass loading to record levels of more than 100 milligrams of manganese oxide per square centimeter without compromising performance, compared to typical levels of around 10 milligrams per square centimeter for commercial devices.
Most importantly, the areal capacitance increased linearly with mass loading of manganese oxide and electrode thickness, while the capacitance per gram (gravimetric capacitance) remained almost unchanged. This indicates that the electrode’s performance is not limited by ion diffusion even at such a high mass loading.
First author Bin Yao, a graduate student in Li’s lab at UC Santa Cruz, explained that in traditional commercial fabrication of supercapacitors, a thin coating of electrode material is applied to a thin metal sheet that serves as a current collector. Because increasing the thickness of the coating causes performance to decline, multiple sheets are stacked to build capacitance, adding weight and material cost because of the metallic current collector in each layer.
“With our approach, we don’t need stacking because we can increase capacitance by making the electrode thicker without sacrificing performance,” Yao said.
The researchers were able to increase the thickness of their electrodes to 4 millimeters without any loss of performance. They designed the electrodes with a periodic pore structure that enables both uniform deposition of the material and efficient ion diffusion for charging and discharging. The printed structure is a lattice composed of cylindrical rods of the graphene aerogel. The rods themselves are porous, in addition to the pores in the lattice structure. Manganese oxide is then electrodeposited onto the graphene aerogel lattice.
“The key innovation in this study is the use of 3D printing to fabricate a rationally designed structure providing a carbon scaffold to support the pseudocapacitive material,” Li said. “These findings validate a new approach to fabricating energy storage devices using 3D printing.”
Supercapacitor devices made with the graphene aerogel/manganese oxide electrodes showed good cycling stability, retaining more than 90 percent of initial capacitance after 20,000 cycles of charging and discharging. The 3D-printed graphene aerogel electrodes allow tremendous design flexibility because they can be made in any shape needed to fit into a device. The printable graphene-based inks developed at LLNL provide ultrahigh surface area, lightweight properties, elasticity, and superior electrical conductivity.
Learn more: 3D-printed supercapacitor electrode breaks records in lab tests
The Latest on: Supercapacitor
[google_news title=”” keyword=”supercapacitor” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Supercapacitor
- CO2 capture projects at Wyoming coal plant receive fundingon April 27, 2024 at 12:26 am
Basin Electric Power Cooperative's coal-fired Dry Fork Station hosts a CCS testing facility which allows CO2 capture technology companies access to the flue gas that would otherwise be released from ...
- Scientists Uncover Surprising Efficiency of “Messy” Supercapacitorson April 26, 2024 at 10:41 pm
The energy density of supercapacitors, devices similar to batteries that can recharge rapidly in just seconds or minutes, can be improved by increasing the ‘messiness’ of their internal structure. Res ...
- Opinion: Alberta’s electricity grid needs energy storage to avoid brownoutson April 26, 2024 at 5:03 am
If we learned anything about Alberta’s electricity grid recently, it’s that our system desperately needs more energy storage.
- Structural disorder key to high-capacitance carbon electrodeson April 25, 2024 at 1:31 am
Structural disorder increases the capacitance of carbon supercapacitor electrodes, according to new findings from a team of UK-based researchers. The discovery could lead to the development of ...
- Forget Long Drives on Electric! This Mercedes Hybrid Prioritizes Poweron April 24, 2024 at 1:07 pm
Forget long electric drives! This high-performance Mercedes hybrid, the mouthful-of-a-name Mercedes-AMG GT63 S E Performance Coupe, is built for speed, not electric range. Its tiny 9-mile electric ...
- Sodium is safer and more abundant than lithiumon April 24, 2024 at 10:02 am
Sodium-ion batteries aren't new, but they've only started to gain traction in recent years. Compared to their lithium counterparts, the materials used in sodium batteries are ...
- Rubber-like stretchable energy storage device fabricated with laser precisionon April 23, 2024 at 5:00 pm
Scientists use laser ablation technology to develop a deformable micro-supercapacitor.
- BYD's roofless, no-windscreen, scissor-door supercar: Headed for productionon April 21, 2024 at 8:56 pm
Chinese electric auto-giant BYD has released a bold supercar concept through its premium Fang Cheng Bao brand. The Super 9 rocks no roof, the barest hint of windscreen, and lascivious scissor doors ...
- Supercapacitor Market CAGR of 23.3%, Unveiling the Enigma Advancements in Deep Understanding through Research Techniqueson April 21, 2024 at 4:16 pm
Request To Download Free Sample of This Strategic Report @- https://reportocean.com/industry-verticals/sample-request?report_id=AMR1042 ...
via Bing News