Pharmaceuticals owe their effects mostly to their chemical composition, but the packaging of these drugs into specific physical formulations also need to be done to exact specifications. For example, many drugs are encapsulated in solid microparticles, the size and shape of which determine the timing of the drug’s release and its delivery to specific parts of the body.
When engineering these drug microparticles, consistency is key, but common drug manufacturing techniques, such as spray drying and ball milling, produce uneven results. The ideal method involves microfluidics, a kind of liquid assembly line that drips out perfectly sized microparticles, one at a time.
University of Pennsylvania engineers have now developed a microfluidic system where more than ten thousand of these devices run in parallel, all on a silicon-and-glass chip that can fit into a shirt pocket.
Scaling up microfluidic systems has been a major challenge, as they depend on a tightly controlled flow rates to produce particles of a consistent size. The Penn team’s innovation is new fluidic architecture, built with the technology used to manufacture computer chips, resulting in a system that can manufacture these drug particles a thousand times faster than ever before.
The team, led by David Issadore, assistant professor in the School of Engineering and Applied Science’s Department of Bioengineering, and Sagar Yadavali, a postdoctoral researcher in his lab, outlined the design of their system in the journal Nature Communications. Daeyeon Lee, professor in the Department of Chemical and Biomolecular Engineering, and Heon-Ho Jeong, then graduate student in his lab, contributed to the study.
The Penn team is currently testing their system with David Lai, a research investigator at GlaxoSmithKline.
Current pharmaceutical microparticle manufacturing techniques involve spraying them in liquid form from a nozzle and letting them dry, or milling larger solid particles down in a tumbler. However, since the microparticles are being made en masse, there can be significant variations in their size and shape.
“These manufacturing problems mean that an enormous amount of time and money is spent on size reductions,” Yadavali said. “That leads to higher costs.”
Microfluidics provides a potential solution to these problems. By synthesizing the drugs in a network of microscopic channels and chambers, surface tension and drag forces can be finely tuned to generate particles of a consistent size and shape. However, there are intrinsic limitations to how fast these microscale devices can work.
“The bottleneck for increasing the throughput of microfluidics is a fundamental physics problem,” Issadore said. “We cannot run the individual microfluidic devices faster than any other lab, because the microfluidic phenomenon that enables the drug microparticles to be precisely fabricated stops working above a critical flow rate?—?they go from making bubbles to making unstable jets.”
Typical flow rates are a milliliter-per-hour, far too slow to be of use in an industrial setting. Since increasing the flow rate is not an option, the only way to scale up production is to increase the number of devices.
Previous attempts at large-scale parallelization struggled with another trade-off. In order to distribute flow evenly to all of the devices on the chip, each individual device must have a large pressure drop across it relative to the pressure drop along the delivery channels that feed it. This results in each device running slower than they would if they were fed individually.
The Penn researchers solved this problem by separating the devices into two, one component that provides the required pressure drop and another downstream that makes the particles. This allows many devices to be incorporated in parallel without having an effect on the throughput of each one.
“By incorporating high-aspect-ratio flow resistors upstream of each device,” Yadavali said, “we can decouple individual droplet design from the system-level design. which allows us to incorporate any type of microfluidic particle generator we want, and as many as we can fit onto a chip.”
Using lithography to simultaneously etch 10,260 devices into a four-inch silicon wafer, sandwiching it between two glass plates to make hollow channels, and hooking up its single sets of inlets and outlets, the Penn team’s system produces an effective flow rate than is more than ten thousand times faster than what can be typically achieved in a microfluidic device.
The Penn team first tested their system by making simple oil-in-water droplets, at a rate of more than 1 trillion droplets per hour. To demonstrate it with materials more relevant to drug manufacturing, they also made biocompatible microparticles out of polycaprolactone, at a rate of about 328 billion particles per hour.
“Drugs can be mixed into polycaprolactone microparticles, so that controlled amounts of drug can be gradually released as the particle dissolves,” Sagar said. “The rate that the drug leaves the particle is dependent on the particle size, which is why having a consistent size is so important.”
The researchers only mixed the polycaprolactone with water; testing on a real drug would have been prohibitively expensive given their system’s rate of production.
“We at GSK are delighted to be part of a research collaboration with Daeyeon and David’s research groups. Congratulations on an exquisite and impactful publication,” said Lai.
The researcher’s microfluidic system is currently capable of this kind of simple drug packaging, but other, more complicated manufacturing techniques are possible.
“We are now working to implement additional microfluidic operations onto our chip, including miniaturized versions of solvent extraction, crystallization, and other traditional chemical engineering processes,” Issadore said. “By bringing more of the operations necessary to formulate the drug onto our chip, precise ‘designer’ microparticle drug formulations can be produced at an industrial scale.”
Learn more: Penn Engineers’ Liquid Assembly Line Makes Drug Microparticles a Thousand Times Faster Than Ever Before
The Latest on: Drug manufacturing techniques
[google_news title=”” keyword=”drug manufacturing techniques” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Drug manufacturing techniques
- What making weight-loss drugs mean for the environmenton April 27, 2024 at 3:57 am
These peptide-based drugs and others expected to follow are spurring big changes in pharmaceutical chemical manufacturing ... which is then purified using techniques such as high-performance liquid ...
- Scientists learn from caterpillars how to create self-assembling capsules for drug deliveryon April 26, 2024 at 8:00 am
Self-assembling molecules that spontaneously organize themselves to form complex structures are common in nature. For example, the tough outer layer of insects, called the cuticle, is rich in proteins ...
- New method could cut waste from drug productionon April 24, 2024 at 10:37 am
Scientists have developed a sustainable new way of making complex molecules, which could greatly reduce waste produced during drug manufacturing, a study suggests.
- Madison firefighter faces felony drug charges, accused of selling cocaine out of fire stationon April 23, 2024 at 2:25 pm
Trevor Wiggins, 47, was charged April 12 with four felony drug trafficking charges after he allegedly sold cocaine out of the fire station he worked at.
- Lilly to buy injectable drug plant in manufacturing ramp-upon April 22, 2024 at 3:33 pm
The acquisition of a Nexus Pharmaceuticals facility in Wisconsin could help Lilly better meet demand for injectable medicines, like those it makes for diabetes and obesity.
- AI Revolutionizes GMP Facility Designon April 19, 2024 at 11:16 am
How AI can help engineers and architects to create efficient, innovative facility designs.
- 3D Systems' (DDD) Cranial Implant Solution Receives FDA Nodon April 16, 2024 at 7:47 am
D Systems DDD recently announced that the U.S. Food and Drug Administration (FDA) has granted 510(k) clearance for its innovative 3D-printed, patient-specific cranial implant solution, the VSP PEEK ...
- 5 Takeaways From U.S. News’ ‘Solving the Crisis of Critical Drug Shortages’ Eventon April 16, 2024 at 5:39 am
However, with the end of the pandemic came a return to more rigorous inspections, bringing with them additional focus on quality issues in drug manufacturing, as well as the folding of some ...
- Austinpx Invests In Pharmaceutics And Manufacturing Capabilities To Accelerate Drug Developmenton April 8, 2024 at 3:12 pm
The technology enables rapid transition into first-in-human clinical trial material manufacturing, while also reducing the cost of drug product development. The FT4 Powder Rheometer from Freeman ...
via Bing News