EPFL scientists have shown how to achieve a dramatic increase in the capacity of optical fibers; Their simple, innovative solution reduces the amount of space required between the pulses of light that transport data
Optical fibers carry data in the form of pulses of light over distances of thousands of miles at amazing speeds. They are one of the glories of modern telecommunications technology. However, their capacity is limited, because the pulses of light need to be lined up one after the other in the fiber with a minimum distance between them so the signals don’t interfere with each other. This leaves unused empty space for data in the fiber.
EPFL’s Camille Brès and Luc Thévenaz have come up with a method for fitting pulses together within the fibers, thereby reducing the space between pulses. Their approach, which has been published in Nature Communications, makes it possible to use all the capacity in an optical fiber. This opens the door to a ten-fold increase in throughput in our telecommunications systems.
Fiber optics at a crossroads
“Since it appeared in the 1970s, the data capacity of fiber optics has increased by a factor of ten every four years, driven by a constant stream of new technologies,” says Camille Brès, of the Photonics Systems Laboratory (PHOSL). “But for the last few years we’ve reached a bottleneck, and scientists all over the world are trying to break through.”
There have been several different approaches to the problem of supplying more throughput to respond to growing consumer demand, but they often require changes to the fibers themselves. That would entail pulling out and replacing the existing infrastructure. Here, the EPFL team took a different approach, looking at the fundamental issue of how to process the light itself, i.e., how best to generate the pulses that carry the digital data. This approach would not entail a need to replace the entire optical fiber network. Only the transmitters would need to be changed.
Traffic problems on the information superhighway
In modern telecommunications exchanges, for example when two cell-phones are communicating with each other, the data are transported between the two antennae on optical fibers, by means of a series of light pulses that form codes.
Simply put, an “on” pulse corresponds to the number 1, while an “off” pulse corresponds to 0. The messages are thus sets of ones and zeros. These codes are decoded by the receiver, providing the initial message. The problem with this system is that the volume of data transmitted at one time can’t be increased. If the pulses get too close together, they no longer deliver the data reliably. “There needs to be a certain distance between each pulse, so they don’t interfere with each other,” says Luc Thevenaz, of EPFL’s Fiber Optics Group (GFO). However, the EPFL team noticed that changes in the shape of the pulses could limit the interference.
Pulses that fit together like a jigsaw puzzle
Their breakthrough is based on a method that can produce what are known as “Nyquist sinc pulses” almost perfectly. “These pulses have a shape that’s more pointed, making it possible to fit them together, a little bit like the pieces of a jigsaw puzzle lock together,” says Camille Brès. “There is of course some interference, but not at the locations where we actually read the data.”
The first to “solve” the puzzle
The idea of putting pulses together like a puzzle to boost optic fibers’ throughput isn’t new. However, the “puzzle” had never been “solved” before: despite attempts using sophisticated and costly infrastructures, nobody had managed to make it work accurately enough – until now. The EPFL team used a simple laser and modulator to generate a pulse that is more than 99% perfect.
Fine-tuning the system
Practically speaking, the shape of pulse is determined by its spectrum. In this case, in order to be able to generate the “jigsaw puzzle,” the spectrum needs to be rectangular. This means that all the frequencies in the pulse need to be of the same intensity. Professors Brès and Thévenaz had this in mind when modulating their lasers.
Simple lasers are generally made up essentially of just one color – i.e., one optical frequency – with a very narrow spectrum. This is rather like a violin that has only one string. However, a laser can be subtly modulated (using a device called a modulator) so that it has other colors/frequencies. The result is a pulse composed of several different colors, with a larger spectrum. The problem is that the pulse’s main color generally still tends to be more intense than the others. This means the spectrum won’t have the rectangular shape needed. For that, each color in the pulse needs to be of the same intensity, rather like getting the strings of a violin to vibrate with the same force, but without making any other strings nearby vibrate.
The team thus made a series of subtle adjustments based on a concept known as a “frequency comb” and succeeded in generating pulses with almost perfectly rectangular spectrum. This constitutes a real breakthrough, since the team has succeeded in producing the long-sought-after “Nyquist sinc pulses.” Professor Thévenaz recounts how it all started: “Camille and I were talking with a Visiting Professor at the University of Leipzig, and we realized that by teaming up we might be able to develop this new approach.”
The technology is already mature
The new pulses could well generate interest among many telecommunications-industry market participants. The technology is already mature, as well as 100% optic and relatively cheap. In addition, it appears that it could fit on a simple chip. “It almost seems too good to be true,” says Prof. Thévenaz.
via Ecole Polytechnique Fédérale de Lausanne
The Latest on: Optic fiber
- Cellcom's new fiber optic network in south vs maritime threatson May 2, 2024 at 11:35 am
Cellcom introduces a 250 km advanced fiber optic network to Eilat, providing an alternative to Suez Canal connections amid Houthis' cable-cutting threats.
- Fiber vs. cable internet: What to consideron May 2, 2024 at 7:54 am
If you’re weighing fiber vs. cable internet, you should consider which technology you can access, along with your speed and budget needs.
- Gainesville resident expresses his concern with construction caused by the expansion of fiber optic internet in Alachua Countyon May 2, 2024 at 7:39 am
Robert Healy is a Gainesville resident who is expressing concerns about the damage fiber optic internet construction is causing to his neighborhood.
- Highline fiber projecton May 2, 2024 at 7:15 am
Highline, an internet service provider, is installing fiber optic lines throughout Grand Junction. So far, Highline has installed 60 miles of broadband in Grand Junction and hopes to double that ...
- Chignik Bay latest to join GCI's fiber optic broadband internet projecton May 1, 2024 at 11:41 am
Chignik Bay on the Alaska Peninsula is the latest community to join GCI’s Aleutians fiber optic cable project. The telecommunications company said crews started digging trenches in Chignik Bay around ...
- Topeka’s fiber network has been restoredon May 1, 2024 at 9:45 am
Topeka’s Customer Service Center, Water Pollution Control facilities and Topeka Fire Station 11 are experiencing outages after a fiber optic line was cut. After 11 a.m.
- Memphis Mayor Announces Fiber Broadband Expansion to Boost Connectivity and Economic Growthon April 30, 2024 at 1:09 pm
Memphis announces a major fiber broadband project to improve internet speeds and accessibility citywide, with the network set to reach 85% of residents.
- Hello, AT&T fiber-optic internet, good-bye to Comcast’s cable service?on April 27, 2024 at 4:00 am
AT&T began installing fiber in Houston nine years ago, but there are still big chunks of the area that don’t yet have it.
- A new use for fiber optic lines: detecting earthquakes, Caltech researchers sayon April 25, 2024 at 8:40 pm
Zhongwen Zhan, a geophysics professor at Caltech, and his team of researchers say they have found a way to use fiber optic cables to monitor earthquakes. He presented their findings this week.
via Bing News
The Latest on: Frequency comb
- Here’s everything changing in Diablo 4 with Loot Rebornon May 2, 2024 at 2:43 pm
And because you could upgrade your Rare items into Legendaries with the Codex of Power, you had to carefully comb through every single loot drop to make sure you didn’t get perfect affixes on a random ...
- The 10 weirdest subliminal moments in movie historyon May 2, 2024 at 4:31 am
Subliminal imagery has been slipped so sneakily into cinema history that sometimes it's impossible to pick up on first glance.
- Twisting and binding matter waves with photons in a cavityon May 1, 2024 at 11:00 pm
Precisely measuring the energy states of individual atoms has been a historical challenge for physicists due to atomic recoil. When an atom interacts with a photon, the atom "recoils" in the opposite ...
- "All-seeing" laser tech to track chemical attackson April 29, 2024 at 3:09 am
According to the researchers, SAURON will focus in on small particles floating in the air — for instance, chemicals like ammonium nitrate, a common ingredient in explosives, or fentanyl — using Nobel ...
- Colorado State University lands $25 million grant to boost methane detection workon April 29, 2024 at 1:05 am
The Methane Emissions Technology Evaluation Center (METEC) in Fort Collins, Colorado, has received a $25 million grant from the U.S. Department of Energy to expand its methane leak simulator site. The ...
- $1.34 million NSF grant positions Bates as leader in solar-terrestrial physics in Maineon April 26, 2024 at 8:16 am
Bates will use the grant to appoint a professor in solar-terrestrial physics, a field that explores interactions between the Sun and Earth’s magnetic field and atmosphere. The faculty position will be ...
- Precision Spectroscopy Now Possible Under Starved-Light Conditionson April 20, 2024 at 9:23 am
In a study recently published in Nature, researchers from the Max Born Institute in Berlin, Germany, and the Max-Planck Institute of Quantum Optics in Garching have unveiled a new technique for ...
- We Did the Dirty Work: These Are the Best Automatic Litter Boxes We Testedon April 18, 2024 at 7:45 am
Our cats put Whisker's Litter-Robot 4, PetSnowy's Snow+, Casa Leo's Loo Too, and more to the test. See what we ranked at the best overall and best budget pick.
- 10 Best Sites to Find Out Who Called Me From This Phone Numberon April 18, 2024 at 4:00 am
The best way to find out who called you from a phone number is to use a reverse phone lookup service such as TruthFinder, Intelius, Instant Checkmate, Spokeo, or BeenVerified.
- Quantum Internet Unleashed With HiFi’s Laser Breakthroughon April 18, 2024 at 3:02 am
Fraunhofer IAF achieves record output power with VECSEL for quantum frequency converters. The expansion of fiber optics is progressing worldwide, which not only increases the bandwidth of conventional ...
via Bing News