Thirteen-year-old Sydney Kendall had one request for the Washington University in St. Louis students building her a robotic prosthetic arm: Make it pink.
Kendall Gretsch, Henry Lather and Kranti Peddada, seniors studying biomedical engineering in the School of Engineering & Applied Science, accomplished that and more. Using a 3-D printer, they created a robotic prosthetic arm out of bright-pink plastic. Total cost: $200, a fraction of the price of standard prosthetics, which start at $6,000.
“Currently, prosthetics are very expensive, and because kids keep growing, it is too costly for them to have the latest technology,” said Sydney’s mother, Beth Kendall. “With the 3-D printer, a prosthetic can be made much less expensive. The possibilities of what can be done to improve prosthetics using this technology is very exciting.”
Sydney lost her right arm in a boating accident when she was six years old. She learned to write with her left hand, but found most tasks difficult to accomplish with her prosthetic arm. Sydney said her new arm is easy to manipulate. By moving her shoulder, she can direct the arm to throw a ball, move a computer mouse and perform other tasks.
Peddada said it was thrilling to observe Sydney use her arm.
“It really showed us the great things you can accomplish when you bridge medicine and technology,” Peddada said.
The students developed the robotic hand as part of their engineering design course with Joseph Klaesner, PhD, associate professor of physical therapy at the School of Medicine. Several local medical practitioners, including orthopedic hand surgeons Charles A. Goldfarb, MD, and Lindley Wall, MD, both associate professors of orthopaedic surgery at the School of Medicine, served as mentors.
“They brought their engineering expertise, and we shared our practical experience with prosthetics and the needs of children,” Goldfarb wrote in a recent blog post about the project. “It was a valuable experience as Kendall, Henry and Kranti had no prosthetic experience and were able to think about the issues in a very different way.”
As Goldfarb explained, the WUSTL student design offers two key design differences that set it apart from similar “Robohand” devices that have been invented recently — the motor and the working thumb.
This prosthetic is battery-powered and controlled with an accelerometer (like in the iPhone). The thumb moves with a slightly different trigger (compared with finger motion).
Prosthetic limbs are tricky for patients of any age, and especially for children, noted Goldfarb, because they’re still growing and need to move to larger-sized devices on a regular basis. Since prosthetics have no sensation, some kids are more comfortable making do with their existing natural limbs, he added.
While 3-D printers can cost about $2,500, they are capable of producing artificial limbs at a relatively low individual cost.
“These prosthetic hands are really exciting because they are inexpensive, can be remade when the child grows, and they do offer functional abilities,” he said.
The Latest on: 3D printed prosthetic arm
[google_news title=”” keyword=”3D printed prosthetic arm” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printed prosthetic arm
- 3D Printed Prosthetics Market, Anticipated Worth USD 3 Billion by 2033on May 3, 2024 at 5:30 am
According to Market.us, the projected value of the Global 3D Printed Prosthetics Market is estimated to reach approximately USD 3 Billion by 2033. This is a significant increase from its 2023 value of ...
- Students invent 3D-printed prosthetic arms and explore bee pollination at national STEM competitionon April 30, 2024 at 3:44 pm
There's research on everything from overcoming bias in artificial intelligence to the creation of a $40 3D-printed prosthetic arm. "You can push in a button, lengthen it and it locks back in place," ...
- Global 3D Printed Prosthetics Industry is expected to reach US$3.5 Billion, growing at an 8% annual pace By 2033 | FMIon April 26, 2024 at 5:58 am
The Global 3D Printed Prosthetics Industry is poised for significant growth, driven by rising healthcare spending, technological advancements, and increasing demand for customized prosthetic solutions ...
- Gorilla Receives World’s First, 3D Printed Titanium Cast to Heal Broken Armon April 26, 2024 at 3:18 am
A gorilla in Cincinnati has received a world first, a fully 3D printed, titanium cast to help heal a broken humerus bone.
- 3D Printing In Prosthetics Market Projected to Exceed USD 3.7 Billion by 2032, Marketresearch.bizon April 7, 2024 at 5:00 pm
Marketresearch.biz reports that the 3D Printing in Prosthetics Market size is expected to be worth around USD 3.7 Bn by 2032 from USD 1.8 Bn in 2022, growing at a CAGR of 7.8% during the forecast ...
- Polly the Duck to get new 3D-printed prosthetic billon April 4, 2024 at 2:38 am
showed FOX 7 Austin around the Makerspace 3D Print Studio where he and other students accepted the challenge of creating a prosthetic bill for Polly. "We used our 3D scanning hardware here and a ...
- Cleveland students delivering 3D-printed prosthetics to Ecuadoron July 24, 2023 at 3:25 am
Three students who participated in the Great Lakes Science Center's robotics initiative will travel to Ecuador this week to deliver 3D-printed prosthetic limbs to four children there. Why it ...
- Students create 3D Printed robot prosthetic limb for amputeeson August 14, 2020 at 6:52 pm
None-robotic Prosthetic Limbs available on the NHS are either purely cosmetic ... The actual manufacturing of the hand is by a type of 3D printing called Stereolithography, or simply SLA printing, ...
- Dad makes epic 3D-printed superhero prosthetic hands and arms for kidson March 4, 2019 at 1:56 pm
A generous father who 3D-printed prosthetic limbs for amputee children has crowdfunded $33k to continue sending the life-changing equipment to kids for free. Australian engineer Mat Bowtell sends ...
- Moving 3D Printed Prosthetic Arms With A Pulseon September 7, 2018 at 6:45 am
This pulse sensor arm also makes use of the team’s TNS 1i, a 3D printed robotic hand that makes use of those tiny little linear actuators. Of course, if you’re going to build a prosthetic ...
via Bing News