Thirteen-year-old Sydney Kendall had one request for the Washington University in St. Louis students building her a robotic prosthetic arm: Make it pink.
Kendall Gretsch, Henry Lather and Kranti Peddada, seniors studying biomedical engineering in the School of Engineering & Applied Science, accomplished that and more. Using a 3-D printer, they created a robotic prosthetic arm out of bright-pink plastic. Total cost: $200, a fraction of the price of standard prosthetics, which start at $6,000.
“Currently, prosthetics are very expensive, and because kids keep growing, it is too costly for them to have the latest technology,” said Sydney’s mother, Beth Kendall. “With the 3-D printer, a prosthetic can be made much less expensive. The possibilities of what can be done to improve prosthetics using this technology is very exciting.”
Sydney lost her right arm in a boating accident when she was six years old. She learned to write with her left hand, but found most tasks difficult to accomplish with her prosthetic arm. Sydney said her new arm is easy to manipulate. By moving her shoulder, she can direct the arm to throw a ball, move a computer mouse and perform other tasks.
Peddada said it was thrilling to observe Sydney use her arm.
“It really showed us the great things you can accomplish when you bridge medicine and technology,” Peddada said.
The students developed the robotic hand as part of their engineering design course with Joseph Klaesner, PhD, associate professor of physical therapy at the School of Medicine. Several local medical practitioners, including orthopedic hand surgeons Charles A. Goldfarb, MD, and Lindley Wall, MD, both associate professors of orthopaedic surgery at the School of Medicine, served as mentors.
“They brought their engineering expertise, and we shared our practical experience with prosthetics and the needs of children,” Goldfarb wrote in a recent blog post about the project. “It was a valuable experience as Kendall, Henry and Kranti had no prosthetic experience and were able to think about the issues in a very different way.”
As Goldfarb explained, the WUSTL student design offers two key design differences that set it apart from similar “Robohand” devices that have been invented recently — the motor and the working thumb.
This prosthetic is battery-powered and controlled with an accelerometer (like in the iPhone). The thumb moves with a slightly different trigger (compared with finger motion).
Prosthetic limbs are tricky for patients of any age, and especially for children, noted Goldfarb, because they’re still growing and need to move to larger-sized devices on a regular basis. Since prosthetics have no sensation, some kids are more comfortable making do with their existing natural limbs, he added.
While 3-D printers can cost about $2,500, they are capable of producing artificial limbs at a relatively low individual cost.
“These prosthetic hands are really exciting because they are inexpensive, can be remade when the child grows, and they do offer functional abilities,” he said.
The Latest on: 3D printed prosthetic arm
[google_news title=”” keyword=”3D printed prosthetic arm” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printed prosthetic arm
- Global 3D Printed Prosthetics Industry is expected to reach US$3.5 Billion, growing at an 8% annual pace By 2033 | FMIon April 26, 2024 at 5:58 am
The Global 3D Printed Prosthetics Industry is poised for significant growth, driven by rising healthcare spending, technological advancements, and increasing demand for customized prosthetic solutions ...
- Gorilla Receives World’s First, 3D Printed Titanium Cast to Heal Broken Armon April 26, 2024 at 3:18 am
A gorilla in Cincinnati has received a world first, a fully 3D printed, titanium cast to help heal a broken humerus bone.
- 3D Printing Revolutionizes Prosthetic Care for Amputees at Thai-Myanmar Borderon April 18, 2024 at 9:32 am
The Burma Children's Medical Fund at the Myanmar border has leveraging 3D printing to create prosthetics for those facing limb loss.
- Funding Tips for Emerging 3D Printing Entrepreneurson April 13, 2024 at 2:58 pm
The 3D printing industry is booming. The market is estimated to grow from US$12.6 billion in 2020 to a staggering US$37.2 billion by 2026. These estimates underline the huge potential of 3D printing ...
- 3D Printing In Prosthetics Market Projected to Exceed USD 3.7 Billion by 2032, Marketresearch.bizon April 7, 2024 at 5:00 pm
Marketresearch.biz reports that the 3D Printing in Prosthetics Market size is expected to be worth around USD 3.7 Bn by 2032 from USD 1.8 Bn in 2022, growing at a CAGR of 7.8% during the forecast ...
- Polly the Duck to get new 3D-printed prosthetic billon April 4, 2024 at 9:38 am
Across town, Ryan Andrade, a junior at Southwestern University, showed FOX 7 Austin around the Makerspace 3D Print Studio where he and other students accepted the challenge of creating a prosthetic ...
- Polly the Duck to get new 3D-printed prosthetic billon April 4, 2024 at 2:38 am
showed FOX 7 Austin around the Makerspace 3D Print Studio where he and other students accepted the challenge of creating a prosthetic bill for Polly. "We used our 3D scanning hardware here and a ...
- Frisco middle schooler invents an affordable prosthetic armon April 2, 2024 at 3:18 pm
Siddarth Nandyala invented a prosthetic arm that costs $150 to make. He hopes it will help those in need who cannot afford it.
- After amputation, a tortoise is able to walk again, thanks to 3D printed prosthetic wheelon March 27, 2024 at 6:05 pm
That's when a fellow doctor decided to use their 3D printer to create a prosthetic wheel, allowing Cookie to continue exploring his surroundings days after his amputation. "We used a surgical ...
- Cleveland students delivering 3D-printed prosthetics to Ecuadoron July 24, 2023 at 3:25 am
Three students who participated in the Great Lakes Science Center's robotics initiative will travel to Ecuador this week to deliver 3D-printed prosthetic limbs to four children there. Why it ...
via Bing News