A strong laser is seen illuminating a material in a low-temperature chamber. The laser is being used to change the material’s degree of transparency.
Credit: Caltech/David Hsieh Laboratory
Imagine windows that can easily transform into mirrors, or super high-speed computers that run not on electrons but light. These are just some of the potential applications that could emerge from optical engineering, the practice of using lasers to rapidly and temporarily change the properties of materials.
“These tools could let you transform the electronic properties of materials at the flick of a light switch,” says Caltech Professor of Physics David Hsieh. “But the technologies have been limited by the problem of the lasers creating too much heat in the materials.”
In a new study in Nature, Hsieh and his team, including lead author and graduate student Junyi Shan, report success at using lasers to dramatically sculpt the properties of materials without the production of any excess damaging heat.
“The lasers required for these experiments are very powerful, so it’s hard to not heat up and damage the materials,” says Shan. “On the one hand, we want the material to be subjected to very intense laser light. On the other hand, we don’t want the material to absorb any of that light at all.”
The team found a “sweet spot” to get around this, Shan says, where the frequency of the laser is fine-tuned in such a way to markedly change the material’s properties without imparting any unwanted heat.
The scientists also say they found an ideal material to demonstrate this method. The material, a semiconductor called manganese phosphorus trisulphide, naturally absorbs only a small amount of light over a broad range of infrared frequencies. For their experiments, Hsieh, Shan, and colleagues used intense infrared laser pulses, each lasting about 10-13 seconds, to rapidly change the energy of electrons inside the material. As a result, the material shifted from a highly opaque state to a highly transparent one for certain colors of light.
Even more critical, the researchers say, is that the process is reversible. When the laser turns off, the material instantly goes back to its original state completely unscathed. This would not be possible if the material had absorbed the laser light and heated up because it would take a long time for the material to dissipate the heat. The heat-free manipulation used in the new process is known as “coherent optical engineering.”
The method works because the light alters the differences between the energy levels of electrons in the semiconductor (called band gaps) without kicking the electrons themselves into different energy levels, which is what generates heat.
“It’s as if you have a boat, and then a big wave comes along and vigorously rocks the boat up and down without causing any of the passengers to fall down,” explains Hsieh. “Our laser is vigorously rocking the energy levels of the material, and that alters the materials’ properties, but the electrons stay put.”
Researchers have previously theorized how this method would work. For example, in the 1960s, Caltech alumnus Jon H. Shirley (PhD ’63), put forth mathematical ideas about how to solve for electron-energy levels in a material in the presence of light. Building on this work, Hsieh’s Caltech team collaborated with theorists Mengxing Ye and Leon Balents from UC Santa Barbara to calculate the expected effects of laser illumination in manganese phosphorus trisulphide. The theory matched the experiments with “remarkable” accuracy, says Hsieh.
The findings, Hsieh says, mean that other researchers can now potentially use light to artificially create materials, such as exotic quantum magnets, which would have been otherwise difficult or even impossible to create naturally.
“In principle, this method can change optical, magnetic, and many other properties of materials,” says Shan. “This is an alternative way of doing materials science. Rather than making new materials to realize different properties, we can take just one material and ultimately give it a broad range of useful properties.”
Original Article: Transforming Materials with Light
More from: California Institute of Technology | University of California Santa Barbara | Seoul National University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Optical engineering
- U of A set to launch student-led satellite mission
A University of Arizona student-led and built satellite will be launched into space. If the inflatable antenna works correctly, other missions will use it.
- Optical barcodes expand range of high-resolution sensor
The same geometric quirk that lets visitors murmur messages around the circular dome of the whispering gallery at St. Paul's Cathedral in London or across St. Louis Union Station's whispering arch ...
- Watch A Normie Spend 30 Minutes Losing His Mind Over New Car Trends
If you’re looking to learn something new, it’s usually a good idea to go to an expert on the subject. They’ve studied it for years, know the ins and outs and can explain it in a way that you’ll ...
- Video calls from Mars? Lasers make deep-space communication a reality
This recent achievement involved successfully transmitting engineering data to Earth from a staggering distance of over 140 million miles.
- NASA's laser communications demo sends data from over 140 million miles away
NASA’s Deep Space Optical Communications (DSOC), an experiment riding aboard the agency's Psyche spacecraft, recently sent a copy of engineering data from over 140 million miles (226 million ...
Go deeper with Google Headlines on:
Optical engineering
[google_news title=”” keyword=”optical engineering” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Coherent optical engineering
- Titan Medical gives progress report about Conavi merger
Titan Medical and Conavi aim to commercialize Conavi’s Novasight Hybrid system for guiding common minimally invasive coronary procedures.
- AI just helped us find out where Plato is buried - here's how
The discovery is just the latest fragment of history to be uncovered with the aid of AI. Prizes are waiting for the next breakthrough.
- Ribbon Communications Inc. (NASDAQ:RBBN) Q1 2024 Earnings Call Transcript
Q1 2024 Earnings Call April 24, 2024 Ribbon Communications Inc. isn’t one of the 30 most popular stocks among hedge funds at the end of the third quarter (see the details here). Operator: Hello and ...
- Q1 2024 Ribbon Communications Inc Earnings Call
Hello, and welcome to the Ribbon Communications first-quarter 2024 financial results conference call. (Operator Instructions) As a reminder, this conference is being recorded. It is now my pleasure to ...
- A ‘bionic eye’ scan of an ancient, scorched scroll points to Plato’s long-lost gravesite
Technology continues to reveal new details written on parchment burned by the Mount Vesuvius eruption of 79 CE.
Go deeper with Google Headlines on:
Coherent optical engineering
[google_news title=”” keyword=”coherent optical engineering” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]