Red-sensitive, blue-sensitive and green-sensitive color sensors stacked on top of each other instead of being lined up in a mosaic pattern – this principle could allow image sensors with unprecedented resolution and sensitivity to light to be created. However, so far, the reality hasn’t quite met expectations. Researchers from Empa and ETH Zurich have now developed a sensor prototype that absorbs light almost optimally – and is also cheap to produce.
The human eye has three different types of sensory cells for the perception of color: cells that are respectively sensitive to red, green and blue alternate in the eye and combine their information to create an overall colored image. Image sensors, for example in mobile phone cameras, work in a similar way: blue, green and red sensors alternate in a mosaic-like pattern. Intelligent software algorithms calculate a high-resolution color image from the individual color pixels.
However, the principle also has some inherent limitations: as each individual pixel can only absorb a small part of the light spectrum that hits it, a large part of the light is lost. In addition, the sensors have basically reached the limits of miniaturization, and unwanted image disturbances can occur; these are known as color moiré effects and have to be laboriously removed from the finished image.
Transparent only for certain colors
Researchers have, therefore, been working for a number of years on the idea of stacking the three sensors instead of placing them next to each other. Of course, this requires that the sensors on top let through the light frequencies that they do not absorb to the sensors underneath. At the end of the 1990s, this type of sensor was successfully produced for the first time. It consisted of three stacked silicon layers, each of which absorbed only one color.
This actually resulted in a commercially available image sensor. However, this was not successful on the market because the absorption spectra of the different layers were not distinct enough, so part of the green and red light was absorbed by the blue-sensitive layer. The colors, therefore, blurred and the light sensitivity was thus lower than for ordinary light sensors. In addition, the production of the absorbing silicon layers required a complex and expensive manufacturing process.
Empa researchers have now succeeded in developing a sensor prototype that circumvents these problems. It consists of three different types of perovskites – a semiconducting material that has become increasingly important during the last few years, for example in the development of new solar cells, due to its outstanding electrical properties and good optical absorption capacity (see “Further reading”). Depending on the composition of these perovskites, they can, for example, absorb part of the light spectrum, but remain transparent for the rest of the spectrum. The researchers in Maksym Kovalenko’s group at Empa and ETH Zurich used this principle to create a color sensor with a size of just one pixel. The researchers were able to reproduce both simple one-dimensional and more realistic two-dimensional images with an extremely high color fidelity.
The advantages of this new approach are clear: the absorption spectra are clearly differentiated and the color recognition is thus much more precise than with silicon. In addition, the absorption coefficients, especially for the light components with higher wavelengths (green and red), are considerably higher in the perovskites than in silicon. As a result, the layers can be made significantly smaller, which in turn allows smaller pixel sizes. This is not crucial in the case of ordinary camera sensors; however, for other analysis technologies, such as spectroscopy, this could permit significantly higher spatial resolution. The perovskites can also be produced using a comparatively cheap process.
However, more work is still needed in order to further develop this prototype into a commercially viable image sensor. Key areas include the miniaturization of pixels and the development of methods for producing an entire matrix of such pixels in one step. According to Kovalenko, this should be possible with existing technologies.
Learn more: The stacked color sensor
The Latest on: Stacked color sensor
[google_news title=”” keyword=”stacked color sensor” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Sony BRC-AM7 4K 60p PTZ Camera with AI-based Auto Framingon May 9, 2024 at 2:02 am
Sony recently announced a flagship 4K 60p pan-tilt-zoom (PTZ) camera model with an integrated lens, called the BRC-AM7. Incorporating PTZ Auto Framing ...
- iPhone 14 vs. iPhone 13: Which iPhone should you buy?on May 8, 2024 at 8:53 am
But the iPhone 14 also offers a larger main camera sensor, and safety features like ... the rear camera module layout from vertically stacked lenses to diagonally arranged ones on the back.
- OLED iPad Pro M4 vs iPad Pro M2: Does advanced screen tech make for a better iPad?on May 8, 2024 at 7:11 am
It's more expensive this time around, but it is an absolute stunner of a tablet. iPad Pro M2 ...
- 7 things you should know about the new M4 iPad Pro and M2 iPad Airon May 7, 2024 at 2:00 pm
New chips, better screens, and expanded sizes are just a few pieces of big news Apple announced today at its "Let Loose" event.
- Omnivision debuts machine vision unit, three new sensorson May 6, 2024 at 1:31 pm
Omnivision unveils its Machine Vision Unit and three new CMOS global-shutter image sensors at Automate 2024.
- Sony Xperia 1 VI and Xperia 10 VI leaked in high-quality imageson May 3, 2024 at 12:12 pm
A massive leak has revealed official-looking images of the upcoming Sony Xperia 1 VI and Xperia 10 VI smartphones.
- Best full-frame camera 2024: the top big sensor DSLRs and mirrorless camerason May 2, 2024 at 4:31 am
Like the Z9, the Z8 features the quickest-ever stacked sensor, while it doesn't have a ... with wide dynamic range thanks to the various color profiles, with real time luts being a standout ...
- Canon tipped to launch 5 new cameras in 2024 – here’s what they could beon April 29, 2024 at 4:46 am
Canon last launched a new camera back in May 2023 – that's almost a year ago and a lengthy hiatus for a brand that makes some of the world's best cameras. Fortunately, Canon fans itching for new gear ...
- If You Work From Home, Here’s 6 Tips To Create The Perfect WFH Officeon April 23, 2024 at 8:31 pm
Whether you have a dedicated home office or a space carved out in the living room, these tips can help to make it stylish, functional, and ergonomic.
- iPhone 16 Pro: Four new camera features coming this yearon April 15, 2024 at 5:00 pm
Images will also offer more detail and improved color, while the increased resolution ... Sony’s latest stacked sensor tech separates out the photo diodes and pixel transistors, which are ...
via Google News and Bing News