This is the first such test of a printed liquid-fueled, metal rocket engine by any university in the world
Like something out of a Robert Heinlein novel, students at the University of California, San Diego (UCSD) have built a metal rocket engine using a technique previously confined to NASA. Earlier this month, the UCSD chapter of the Students for the Exploration and Development of Space (SEDS) at the Jacobs School of Engineering conducted a hot fire test for a 3D-printed metal rocket engine at the Friends of Amateur Rocketry launch site in California’s Mojave Desert. This is the first such test of a printed liquid-fueled, metal rocket engine by any university in the world and the first designed and printed outside of NASA.
The Tri-D rocket engine, as it’s called, was designed and built with the cooperation of NASA’s Marshall Space Flight Center as part of an effort to explore the feasibility of printed rocket components. For purposes of the exercise, it was designed to power the third stage of a Nanosat launcher, that is, one capable of launching satellites that weigh less than 1.33 kg (2.93 lb).
Tri-D is only about 7 in (17.7 cm) long and weighs about 10 lb (4.5 kg). Made of a chromium-cobalt alloy, it burns kerosene and liquid oxygen and produces about 200 lb (90.7 kg) of thrust. The students’ main contribution was design of the injector plate, which is a key component used to inject fuel into the combustion chamber. In this case, the injector has a Fuel-Oxidizer-Oxidizer-Fuel inlet arrangement with two outer fuel orifices converging with two inner oxidizer orifices.
The rocket has a regenerative cooling jacket that extends to the nozzle to keep the engine cool while firing. It was designed to burn the fuel in the middle of the combustion chamber to keep as much heat as possible away from the chamber walls, while insulating them with a boundary layer of relatively cool gases.
The Tri-D engine cost only US$6,800 with NASA putting up US$5,000 and the students collected the balance with fundraisers, such as barbecue sales.
Go deeper with Bing News on:
3D-printed metal rocket engine
- AFRL Uses Additive Manufacturing to Make Single-Block Rocket-Engine Thrust Chamber
The AFRL has announced that it has turned to laser powder DED additive manufacturing to create a rocket-engine thrust chamber.
- NASA Tests 3D Printed RAMFIRE Rocket Engine Nozzle
NASA's Reactive Additive Manufacturing for the Fourth Industrial Revolution (RAMFIRE) project test-fired a 3D-printed engine nozzle at Marshall Space Flight Center in Alabama. See the test in real ...
- This 3D-Printed Microturbine Engine Is Designed To Do More Than Fly
A metal 3D printer makes an object one hair-thin horizontal ... but the application of it is a bit lagging, apart from rocket engines, medical implants, and concept projects, such as the Czinger ...
- Launch debut of 3D-printed rocket ends in failure, no orbit
Most of the 110-foot (33-meter) rocket, including its engines, came out of the company’s huge 3D printers in Long Beach, California. Relativity Space said 3D-printed metal parts made up 85% of ...
- Terran-1: 3D-printed rocket lifts off but fails to reach orbit
An almost fully 3D-printed rocket lifted off from Cape Canaveral on Wednesday evening, but ultimately failed to reach orbit. Despite this, the Terran-1 passed key objectives and showed the ...
Go deeper with Google Headlines on:
3D-printed metal rocket engine
[google_news title=”” keyword=”3D-printed metal rocket engine” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Microplastics in water
- Researchers uncover new oceanic locations where microplastics are accumulating: 'Global initiatives are necessary to conserve these rich ecosystems'
If coral reefs die or dwindle in health, whole ecosystems could be affected. Researchers uncover new oceanic locations where microplastics are accumulating: 'Global initiatives are necessary to ...
- Researchers working to keep microplastics from laundry out of water supply
Doing the laundry can also lead to microplastics polluting the water supply and oceans, as the particles are shed from certain kinds of fabrics. A group of researchers are working to create a device ...
- Groundbreaking hydrogel can remove microplastics from water
A newly developed hydrogel is going to create new ways for us to remove harmful microplastics from drinking water.
- Microplastics found in food and water may spread from the gut to the brain
A new study conducted in mice found that microplastics can spread from the gut to other organs in the body, such as the brain, liver, and kidneys.
- Microplastics Found in Brain After Only 4 Weeks of Exposure
A new study found microplastics in the liver, kidneys, and brains of mice after only four weeks of drinking microplastic-tainted water. Microplastics are found in everything from water bottles to food ...
Go deeper with Google Headlines on:
Microplastics in water
[google_news title=”” keyword=”microplastics in water” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]