
Highly-efficient thermoelectric devices are expected to provide clean energy technology-needs of the hour for US energy sustainability
A team of Clemson University physicists consisting of nanomaterial scientists Apparao Rao and Ramakrishna Podila and thermoelectricians Terry Tritt, Jian He and Pooja Puneet worked synergistically through the newly established Clemson Nanomaterials Center to develop a novel technique of tailoring thermoelectric properties of n-type bismuth telluride for high thermoelectric performance.
Their findings were published in journal Scientific Reports.
The current US energy economy and environment are increasingly threatened by fast-dwindling domestic reserves of fossil fuel coupled with severe environmental impact of fossil fuel combustion. Highly-efficient thermoelectric devices are expected to provide clean energy technology-needs of the hour for US energy sustainability. This research is a step towards optimizing the device performance since it outlines a methodology to overcome a challenge that has “frustrated” thermoelectric researchers to date.
Thermoelectric (TE) devices convert waste heat into electricity through a unique material’s property called the Seebeck effect. Basically, the Seebeck effect results in a voltage across the two ends of a TE material, akin to the voltage present across the two ends of a AA battery, when the TE material is properly exposed to the waste heat. In such devices, the efficiency of converting heat into electricity is governed by certain strongly coupled materials properties, viz., electrical resistivity, Seebeck coefficient, and thermal conductivity. A functional TE device consists of multiple legs made up of p-type and n-type materials, just as a diode comprises of a p-n junction.
Bismuth telluride (Bi2Te3) is a layered material and can be viewed as a deck of playing cards, wherein each card is only a few atoms thick. Bi2Te3 is currently regarded as the state-of-the-art TE material with high efficiency for converting waste heat into electricity, and is therefore attractive for energy harvesting processes.
Traditional nanosizing methods failed to improve the performance of n-type Bi2Te3 since they simply downgrade all materials properties simultaneously. Therefore, Clemson researchers and colleagues developed a novel nanosizing method in which we first peel n-type Bi2Te3 into atomically thin-sheets (akin to graphene which is one atom thick sheet of carbon atoms) and reassemble them using a spark plasma sintering process.
The researchers found that that the above described two-step process of first separating the deck of cards into individual cards and then re-assembling them into a deck via spark plasma sintering does enable us to suitably tailor the materials properties of n-type Bi2Te3for high TE performance. In this approach, the so-called ‘interfacial charged defects’ are generated in the sintered n-type Bi2Te3 which not only improves its structural properties but also its thermoelectric efficiency over a wide temperature window, thus making it extremely compatible with p-type Bi2Te3 for manufacturing efficient TE devices.
The improved compatibility factor (demonstrated in this paper) is expected to open new possibilities for highly efficient TE devices. The fascinating and noteworthy element of this research is that defects, which often connote impurity and are associated with low performance or efficiency, can indeed be used to tune the properties of materials to our advantage.
The Latest Google Headlines on:
Thermoelectric devices
[google_news title=”” keyword=”Thermoelectric devices” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Thermoelectric devices
- Holy Grail of material science: how did MIT scientists achieve superconductivity? Details hereon July 18, 2024 at 11:27 am
Superconductivity is a set of physical properties where electrical resistance vanishes and magnetic fields are expelled from the material. Any material exhibiting these properties is a superconductor.
- I Tried the Recovery Gear Sha'Carri Richardson Is Using to Prep For the Olympicson July 17, 2024 at 7:49 pm
Nike and Hyperice teamed up to come out with a tech-enabled boot and vest for athlete warm-up and recovery. Here, our honest impressions of the gear.
- Atom by Atom, Scientists Built a Wonder Material That May Transform Electronicson July 17, 2024 at 7:00 am
Instead, the MIT scientists essentially took matters into their own hands and built a crystalline structure one atom at a time. Using molecular beam epitaxy, atoms are fired onto a substrate in a ...
- Hyderabad: Innovators develop alternative power generation tech that will help power up space missions at low coston July 17, 2024 at 6:41 am
This innovation developed by Hyderabad-based startup HYLENR has received a patent from the Government of India for its low-energy nuclear reactor (LENR). Former DRDO scientist and Padma Sri awardee ...
- First health care device powered by body heat made possible by liquid based metalson July 16, 2024 at 1:05 pm
In the age of technology everywhere, we are all too familiar with the inconvenience of a dead battery. But for those relying on a wearable health care device to monitor glucose, reduce tremors, or ...
- Razor-thin crystalline film 'built atom-by-atom' gets electrons moving 7 times faster than in semiconductorson July 16, 2024 at 4:30 am
Scientists observed record-breaking electron mobility — seven times higher than in conventional semiconductors — with a material made from the same elements as quartz and gold.
- New Crystal Film Shows Unprecedented Electron Mobility, Holds Promise for Deviceson July 14, 2024 at 8:57 pm
A material with a high electron mobility is like a highway without traffic. Any electrons that flow into the material experience a commuter’s dream, breezing through without any obstacles or ...
- Chips could harvest their own energy using a newly-created alloyon July 14, 2024 at 6:12 am
A research collaboration in Europe has created a new alloy of silicon, germanium, and tin that can convert waste heat from computer processors back into electricity.
- Kyocera Introduces Cutting-Edge Peltier Module with 21% Increase in Cooling Performanceon July 10, 2024 at 10:35 am
*1 Maximum Heat Absorption (Qcmax) refers to the amount of heat absorbed by the Peltier module when operated at maximum current. It is defined as the temperature difference between both ends of the ...
- Sony’s new controller idea would simulate firing a real gun on PS5on July 9, 2024 at 9:06 am
A strange patent reveals that Sony is still hard at work on the idea of temperature-changing controllers for the PS5. Would you grab one of these?
The Latest Google Headlines on:
Energy harvesting
[google_news title=”” keyword=”energy harvesting” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Energy harvesting
- Energy Scientists Invent Device That Draws Electricity Out of Thin Airon July 26, 2024 at 5:21 am
Scientists have invented a novel technology that grabs RF signals out of thin air and converts them directly into usable electricity.
- Researchers discover battery-free technology that harvests power from radio and Wi-Fi signals for low-powered deviceson July 26, 2024 at 4:29 am
Research conducted by researchers of the National University of Singapore in collaboration with others has found a way to harvest energy from different wireless signals used for multiple applications, ...
- Future of energy harvesting IoT for smart buildings to be explored at annual meetingon July 25, 2024 at 7:43 am
The EnOcean Alliance has invited members and interested guests to its Member Meeting & Open House Autumn 2024 Edition, taking place in Frankfurt and Main in September, to explore the latest ...
- Battery-free technology can power electronic devices using ambient radiofrequency signalson July 24, 2024 at 7:46 am
Fi, Bluetooth, and 5G rely on radio frequency (RF) signals to send and receive data. A new prototype of an energy harvesting module—developed by a team led by scientists from the National University ...
- Energy: Harvesting a Strategic Locationon July 23, 2024 at 5:00 pm
Please review the following troubleshooting tips or contact us at [email protected]. : Energy: Harvesting a Strategic Location Print Archive See All Foreign Policy Magazine is a division of ...
- Sustainable energy and the power of raindropson July 23, 2024 at 4:19 am
UL’s Dr Sarah Guerin explains her research into sustainable energy harvesting for cheaper, cleaner electricity.
- Researchers design novel light-harvesting method to increase solar cell efficiency by over 35%: 'It can absorb [a lot] of light energy in a relatively thin layer'on July 21, 2024 at 2:00 am
At the very least, it's "progress on the road to more efficient utilization of solar energy." Researchers design novel light-harvesting method to increase solar cell efficiency by over 35%: 'It can ...
- Chips could harvest their own energy using a newly-created alloyon July 14, 2024 at 6:12 am
A research collaboration in Europe has created a new alloy of silicon, germanium, and tin that can convert waste heat from computer processors back into electricity.
- Solar technology: Innovative light-harvesting system works very efficientlyon June 25, 2024 at 5:00 pm
Researchers are reporting progress on the road to more efficient utilization of solar energy: They have developed an innovative light-harvesting system. In order to convert sunlight into ...
- Energy Harvestingon January 24, 2024 at 5:10 pm
and Shinohara, Naoki 2023. RF Energy Harvesting and Wireless Power Transfer for Energy Autonomous Wireless Devices and RFIDs. IEEE Journal of Microwaves, Vol. 3, Issue. 2, p. 763.