An example of FRP-timber composite (wood-FRP) for beam application.
Reinforced concrete is durable and robust but has a large CO2 footprint. Timber, on the other hand, is sustainable and absorbs carbon, although it has inherent negative properties. Hybrid timber systems, by contrast, combine sustainability and strength.
The Fraunhofer Institute for Wood Research, Wilhelm-Klauditz-Institut, WKI develops suitable adhesives and tests the long-term stability of the hybrid timber materials.
Nowadays, buildings and other structures consist mainly of masonry, steel and concrete. Reinforced concrete in particular guarantees high overall stability – after all, it combines the high compressive strength of concrete with the high tensile strength of steel. Moreover, reinforced concrete is highly durable, even in changeable weather conditions. But there is a drawback: Huge amounts of energy are required to manufacture, process and recycle reinforced concrete, releasing a lot of CO2 in the process. The long distances covered in transporting the raw materials worsen the CO2 footprint once again. Timber, on the other hand, grows back quickly and is therefore far more climate-friendly.
It is also available locally. What’s more, the “feel-good factor” is usually greater in timber houses than behind concrete walls. But here, too, there is a catch: Timber is nowhere near as robust as reinforced concrete. In particular, the tensile and compressive strengths perpendicular to the direction of the fibers are comparatively low. Furthermore, timber is characterized by a high variability of properties and hygroscopicity. However, when timber is combined with other materials, the mechanical properties of the overall structure are greatly improved. When used in combination with fiber-reinforced polymer composites or concrete, it is even possible to use wood species and grades that were previously unsuitable for the construction industry. This could broaden the scope for climate-conscious and environmentally friendly forestry.
Long-term behavior of timber-hybrid materials
While several recent studies have looked into the short-term behavior of such timber-hybrid materials, little is known about their long-term behavior. And this is what is of fundamental importance when it comes to construction materials. A group of young researchers now wants to close this gap and, with the guidance of Fraunhofer WKI in Braunschweig, is now investigating the long-term behavior and durability of these hybrid timber construction systems. The project is funded by the German Federal Ministry of Food and Agriculture (BMEL) and the body responsible for the project is the German Agency for Renewable Resources (FNR). “Our aim is to significantly increase the proportion of timber used in building construction – timber construction has a small share of the German construction market, around 10 to 15 percent,” says Prof. Libo Yan, Senior Scientist and Junior Research Group Leader at Fraunhofer WKI. If it could be ensured that hybrid construction materials would withstand wind and weather conditions over a long period of time, there would certainly be a surge in the popularity of this construction material. Researchers from all over the world – as many of them women as men, as Yan proudly explains – are investigating combinations of timber and concrete as well as timber that gains additional rigidity from carbon fibers or flax in a polymer matrix. As for the combination of timber and concrete, the team developed a new way to combine the materials. This is usually done mechanically, i.e., using steel nails, steel plates and steel nets. “By joining the materials using polyurethane or epoxy resin, we can reduce the weight of the timber hybrids and speed up the production process by up to 15 percent,” Yan says.
Even if it may sound contradictory – we are talking about long-term tests, after all: Short-term tests are carried out at the start of the studies. This is because long-term tests over a period of 20 years are both too expensive and too protracted; ultimately, the aim is to open up the possibility of using the new construction materials as quickly as possible. For the short-term tests lasting hours or days, the researchers bond the materials, such as concrete and timber. They then clamp the outer timber sections and apply a defined force to the concrete. How much force is required to destroy the adhesive layer and tear apart the material composite? The research team is developing a theoretical model using both these and other measurements. To do this, they are also examining the microstructure of the adhesive joint using a microscope. “We want to establish a correlation between the macroscopic behavior and the microstructure,” Yan says. “We also go down to the chemical level in the process: For example, in what way do the chemical components change at the interface? In this way, we can systematically improve the properties of the hybrid materials.”
Long-term outdoor testing
To validate the model created and capture reality as accurately as possible, the researchers are now following up their short-term tests with longer-term studies. For this purpose, they expose five- to six-meter-long hybrid panels to wind, rain and sun in the open air for two years. How badly will they be affected by this? Does the model predict this coherently? “We can use the results to fine-tune the model,” explains Yan. Once the model has undergone this practical comparison, the researchers will use it to predict long-term behavior and calculate how the timber-hybrid materials will behave over a period of 50 years. In this way, the research team can establish a basis for using the materials in the construction industry in the future.
Original Article: Hybrid timber systems – the new reinforced concrete for the 21st century
More from: Fraunhofer Society
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Hybrid timber systems
- Timber frame specialist showcases Actis-insulated homes
Timber frame specialist Scandia-Hus is set to showcase the energy efficiency of its Actis-insulated properties when it opens its newest show home later this year. Scandia-Hus, which has used the Acti ...
- CIV_ENV 395-0-30: Timber, Masonry, & Hybrid Structures Design
Design of timber and masonry structural elements ... Students will develop a foundational understanding of hybrid structural systems and its importance in emerging new viable solutions for developing ...
- 20 bikes for every type of bike rider
Whether you want a bike for your daily commute or to ride through the deep woods, we've got an option for you.
- Study: Cost of hybrid mass timber towers now nearly the same as concrete high-rises
According to a new study co-authored by PCL Construction, DCI Engineers, and Weber Thompson, which all have offices and are active in the Seattle area, building a hybrid mass timber high-rise is now ...
- Study: Cost of hybrid mass timber towers now nearly the same as concrete high-rises
Hybrid mass timber structures are also becoming a popular choice for commercial/education buildings, like the newly finished Northlake Commons office/retail building at 3800 Latona Ave. N.E.
Go deeper with Google Headlines on:
Hybrid timber systems
[google_news title=”” keyword=”hybrid timber systems” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Timber-hybrid materials
- Hemp is more sustainable than timber – here’s how it could transform low-carbon construction
A hemp renaissance could transform the construction industry – this fast-growing crop sequesters or stores carbon and has multiple environmental benefits and practical applications.
- Workplace - Come Back
EVEN BEFORE the events of 2020, debate was fierce over the future of the workplace – in fact, whether a designated, fixed office even has a future. But the consensus now seems to be that workplace ...
- Exploring the best flooring for kitchens
Laminate floors by L’antic Colonial are a hybrid combination of several materials; particle board, with a timber base, covered with a layer that represents timber (or other material) and protected ...
- How timber helped SUMA step up to the top
A love of libraries and a mission for mass timber helped Madrid’s SUMA win the EUmies Award for Emerging Architecture for its Gabriel García Márquez Library in Barcelona ...
- Tree nurseries to floating universities: EUmies architecture prize set to announce winning project
From 362 nominees, 40 finalists compete for a €60,000 prize, with additional recognition for emerging architects.
Go deeper with Google Headlines on:
Timber-hybrid materials
[google_news title=”” keyword=”timber-hybrid materials” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]