A construction 3D printer gantry is helping to build a Houston home that will be the first multistory 3D-printed structure in the U.S., also incorporating wood framing in a new hybrid design.
Pouring layers of concrete like rows of toothpaste, an industrial-sized 3D printer this week continued adding a second floor to a Houston home that will be the first multistory printed structure in the United States.
In addition to that achievement, designers Leslie Lok and Sasa Zivkovic, assistant professors of architecture in the College of Architecture, Art and Planning (AAP) and co-principals of the HANNAH Design Office, say the two-story, single-family home is demonstrating innovative construction processes that can be scaled up to multifamily and mixed-use developments, helping to address housing shortages.
Their first-of-its-kind hybrid design connects structural elements composed of 3D-printed concrete with conventional wood framing representative of most U.S. residential construction. The combination shows how each material can be used where it works best, with minimal waste, to create buildings that are efficient, resilient against increasingly intense weather events and potentially more affordable.
“Our hybrid construction approach creates a building system that is structurally efficient, easily replicable and materially responsive,” Lok said. “The project also highlights the exciting design potential of mass-customized architectural components to meet homeowners’ needs and to simplify building system integration.”
Added Zivkovic: “These design efforts aim to increase the impact, applicability, sustainability and cost-efficiency of 3D printing for future residential and multifamily buildings in the U.S.”
On Sept. 12, members of the media were invited to observe progress printing the three-bedroom, three-bathroom home that will also feature a two-car garage and a 40-foot chimney – making the home one of the tallest printed structures to date.
The home is being built in partnership with PERI 3D Construction, which has completed six 3D-printed structures in the U.S. and Europe; Houston-based engineering and design-build contractor CIVE; and other building industry partners. The project team continues to seek industry collaborators and sponsors.
For Lok, who leads the Rural-Urban Building Innovation Lab at AAP, and Zivkovic, who leads the Robotic Construction Lab, the project is the latest to emerge from years of research into 3D printing’s potential to enable “mass customization” without increasing costs. They previously experimented with a hybrid design utilizing 3D-printed concrete and upcycled wood for the Ashen Cabin project in upstate New York. Lok’s HoloWall installation on the Arts Quad explored customization using nonuniform building materials and digital modeling tools. Zivkovic’s prior research involves the development of new concrete printing methods and robotically fabricated timber components.
The 4,000-square foot Houston project advances that work to a larger scale, one that will require another U.S. “first” – a relocation of the large gantry supporting the printer, measuring roughly 60 feet long, 30 feet wide and 30 feet tall, to complete the structure.
Across various systems – from spray-foam insulation to a heating, ventilating, and air conditioning system more common to commercial buildings – the designers say the home integrates design and construction processes well-suited to multifamily developments that will be needed to expand housing capacity in fast-growing cities like Houston.
The designers said their approach could also accelerate construction timelines and reduce costs, since concrete printers may be operated by as few as three or four people. It also minimizes waste, as material can be mixed on demand and printed only for structurally important sections, and can more efficiently integrate wood framing in a modular design.
“Apart from printing technology, the integration of printing with building design and building materials, and the streamlining of construction process are important aspects in the realization of such a project,” Zivkovic said. “We are using this project to demonstrate how 3D printing is not only market-ready, but also capable of building well-designed and high-performance architecture.”
For the Houston home, the printed material is locally sourced and uses cement with a reduced carbon footprint, a mix that may include fly ash, slag and other industrial byproducts. The designers are collaborating with colleagues in the College of Engineering on research relating to ecofriendly building materials, including the potential for concrete to store methane, a potent greenhouse gas. Wood framing, meanwhile, is a renewable resource but is often a product of forest monocultures and may be transported over long distances.
Lok and Zivkovic said the Houston home optimizes use of both materials while taking better advantage of their design potential than many structures limited to only one of them.
“There isn’t a design out there,” Lok said, “that thinks about multifamily housing using these two systems together.”
Original Article: First-of-its-kind 3D-printed home blends concrete, wood
More from: Cornell University
The Latest Updates from Bing News
Go deeper with Bing News on:
Multistory 3D printed structure
- Marriage of synthetic biology and 3D printing produces programmable living materials
Scientists are harnessing cells to make new types of materials that can grow, repair themselves and even respond to their environment. These solid "engineered living materials" are made by embedding ...
- Crafting Programmable Living Materials With Synthetic Biology & 3D Printing
New study uses 3D printing and genetically modified plant cells to create complex, self-repairing materials that could revolutionize biomanufacturing and construction. Scientists are harnessing cells ...
- Researchers develop new 3D printing for ultra-thin multi-material tubular structures
A novel 3D printing technology developed by Beihang University researchers was able to print multi-material tubular structures with a minimum wall thickness as thin as 50 micrometers and a minimum ...
- The world's largest 3D printer is at a university in Maine. It just unveiled an even bigger one
The world’s largest 3D printer has created a house that can cut construction time and labor. An even larger printer unveiled on Tuesday may one day create entire neighborhoods. The machine revealed ...
Go deeper with Bing News on:
3D printed hybrid home
- SINTX AND PRODWAYS AGREE ON CERAMIC SLURRY SUPPLY AND 3D PRINTING AGREEMENT
SINTX was an early pioneer of the ceramic 3D printing industry, successfully printing components beginning in 1998. The company invested in R&D for more than a decade - successfully growing its ...
- From Self-Driving Cars to Electric Vehicles: The Latest in Automotive Innovation
Buckle up, because the automotive industry is revving up with groundbreaking innovation! From self-driving cars to electric vehicles, the future of transportation is here. Join us as we take a closer ...
- Affordable Powerhouse: EAA 10 mm Witness2311
Harnessing the power of the 10 mm Auto in a compact format with generous capacity, EAA’s Witness2311 is an affordable and shootable way to ride the current 10 mm wave.
- America’s Homebred Hypercar Will Soon Be in Customers’ Hands
Carmaker claims that the 21C is the world’s hypercar that is 3D printed and human-AI designed. Deliveries are expected to start this summer, and Czinger plans to build many more models by 2030, ...
- America's Next Great Hypercar Is Almost Ready To Hit The Streets
The first customer deliveries are planned for this summer." Unveiled in 2020, the outrageous, homegrown US hypercar was inspired by another hardcore homegrown icon: The famed SR-71 Blackbird ...