A new study from North Carolina State University researchers finds that novel light-weight composite metal foams (CMFs) are significantly more effective at insulating against high heat than the conventional base metals and alloys that they’re made of, such as steel. The finding means the CMF is especially promising for use in storing and transporting nuclear material, hazardous materials, explosives and other heat-sensitive materials, as well as for space exploration.
“The presence of air pockets inside CMF make it so effective at blocking heat, mainly because heat travels more slowly through air than through metal,” says Afsaneh Rabiei, a professor of mechanical and aerospace engineering at NC State and corresponding author of a paper on the work. The composite metal foam consists of metallic hollow spheres – made of materials such as carbon steel, stainless steel or titanium – embedded in a metallic matrix made of steel, aluminum or metallic alloys.
“We have developed two technologies for manufacturing CMFs,” Rabiei says. “One is based on casting a low melting point matrix material, such as aluminum, around hollow spheres made of a material with a higher melting point, such as steel. This creates aluminum-steel CMFs, for example. The other technique is based on sintering, or baking, the matrix powder around prefabricated hollow spheres. This creates CMFs such as steel-steel, which consist of steel hollow spheres in a steel matrix.”
In one test, researchers exposed samples of 2.5 inch by 2.5 inch steel-steel CMF that were 0.75 inches thick to a fire with an average flame temperature of 800 degrees Celsius for a period of 30 minutes on one side, and monitored the material to see how long it would take for the heat to reach the opposite side of the sample. For a piece of bulk stainless steel with the same dimensions as the CMF sample, it took only four minutes to reach 800 degrees Celsius through the entire thickness of the sample. But it took eight minutes for the steel-steel CMF to reach the same temperature.
“We already knew the CMFs are light-weight materials with outstanding high-velocity impact resistance, and effective radiation shielding, now we know that it can withstand high heat,” Rabiei says. “This difference in thermal conductivity means that the use of composite metal foams could help avoid circumstances where accidents can lead to explosions.”
The researchers also found that the composite metal foam made entirely of stainless steel expands 80 percent less than bulk stainless steel at 200 degrees Celsius – and the differential increases at higher temperatures. Another noteworthy advantage is that the composite metal foam expands at a fairly constant rate when exposed to high heat – whereas conventional bulk metals and alloys such as stainless steel expand more rapidly as temperature increases.
“Our findings suggest that CMF can offer extremely good thermal insulation, superior thermal stability, and excellent flame retardant performances as compared to commercially available materials such as stainless steel,” Rabiei says.
Learn more: Study Finds Metal Foam Handles Heat Better Than Steel
The Latest on: Composite metal foams
[google_news title=”” keyword=”Composite metal foams” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Composite metal foams
- Exploring the Use of Stabilized Aluminum Foam in the Steirereck Restauranton May 8, 2024 at 10:30 pm
ALUSION™ aluminum foam offers a visually captivating and sustainable alternative for architectural cladding, with enhanced acoustic absorption and design flexibility.
- Major graphics industry consolidation of Amari Visual Solutions into Graphic Art Marton May 8, 2024 at 9:04 pm
Graphic Art Mart has consolidated Amari Visual Solutions into the Graphic Art Mart brand creating a company with over 120 staff and 13 locations nationally.
- Enhancing Electronics with Advanced Composite Phase Change Materialson May 7, 2024 at 5:42 am
Composite PCMs enhance thermal management in electronics, offering improved heat dissipation and device longevity.
- 3D Printing Finds a Homeon May 2, 2024 at 8:49 am
“Prefabricated 3D printed homes reduce the amount of labor required to build a home, thereby making homes safer, potentially cheaper, and much faster from design to completion,” says Buff López, an ...
- Syntactic Foam Market Is Likely to Experience a Tremendous Growth in near Future | US$ 218.1 billionon May 1, 2024 at 2:45 pm
The global syntactic foam market experienced a significant growth in 2021, reaching a size of US$ 115.1 billion. It is projected to expand at a compound annual growth rate (CAGR) of 6.8% during the ...
- Keep rims looking fresh with the best chrome wheel cleanerson December 20, 2023 at 10:28 am
Alloys are fabricated as a single composite-metal wheel that is then polished ... When paired with a soft-foam detailing ball, you can get a consistent finish that easily wipes away with a soft ...
- Metal AM advances in composite toolingon November 20, 2022 at 4:00 pm
The severe curvature of this winglet’s facesheet is difficult and costly to achieve in conventional metal forming or machining, as well as in carbon fiber-reinforced composite tooling, adding cost and ...
- Hybrid and Composite Materialson November 2, 2019 at 4:09 pm
Polymer composite systems provide low-cost manufacturing, easy processing, chemical resistance and low weight, but when combined with nanomaterials additional properties can also be achieved.
- Foams and Foam Materials Informationon February 11, 2018 at 7:19 am
Foams and foam materials are available in a variety of forms. Some products contain metal, metal alloy or ceramic materials. Others contain plastics, polymers, elastomers, thermoset plastics, ...
- Foams and Foam Materials Specificationson February 11, 2018 at 7:19 am
Metal Foam Materials consist of a metal or metal alloy ... Structural / Composites Foam products are designed for structural applications such as constructing composite foam cored laminates, column ...
via Bing News