Researchers at the University of Waterloo have taken a huge step towards making smart devices that do not use batteries or require charging.
These battery-free objects, which feature an IP address for internet connectivity, are known as Internet of Things (IoT) devices. If an IoT device can operate without a battery it lowers maintenance costs and allows the device to be placed in areas that are off the grid.
Many of these IoT devices have sensors in them to detect their environment, from a room’s ambient temperature and light levels to sound and motion, but one of the biggest challenges is making these devices sustainable and battery-free.
Professor Omid Abari, Postdoctoral Fellow Ju Wang and Professor Srinivasan Keshav from Waterloo’s Cheriton School of Computer Science have found a way to hack radio frequency identification (RFID) tags, the ubiquitous squiggly ribbons of metal with a tiny chip found in various objects, and give the devices the ability to sense the environment.
“It’s really easy to do,” said Wang. “First, you remove the plastic cover from the RFID tag, then cut out a small section of the tag’s antenna with scissors, then attach a sensor across the cut bits of the antenna to complete the circuit.”
In their stock form, RFID tags provide only identification and location. It’s the hack the research team has done — cutting the tag’s antenna and placing a sensing device across it — that gives the tag the ability to sense its environment.
To give a tag eyes, the researchers hacked an RFID tag with a phototransistor, a tiny sensor that responds to different levels of light.
By exposing the phototransistor to light, it changed the characteristics of the RFID’s antenna, which in turn caused a change in the signal going to the reader. They then developed an algorithm on the reader side that monitors change in the tag’s signal, which is how it senses light levels.
Among the simplest of hacks is adding a switch to an RFID tag so it can act as a keypad that responds to touch.
“We see this as a good example of a complete software-hardware system for IoT devices,” Abari said. “We hacked simple hardware — we cut RFID tags and placed a sensor on them. Then we designed new algorithms and combined the software and hardware to enable new applications and capabilities.
“Our main contribution is showing how simple it is to hack an RFID tag to create an IoT device. It’s so easy a novice could do it.”
Learn more: Batteryless smart devices closer to reality
The Latest on: Smart devices
[google_news title=”” keyword=”smart devices” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Smart devices
- After 16 years, Ecobee is shutting down support for the original smart thermostaton May 2, 2024 at 11:01 am
The Ecobee Smart Thermostat that first launched way back in 2008 is being cut off. The company says that while it will still control your heating and air, it will no longer receive firmware upgrades or connect to Ecobee’s servers.
- Cellphones and car devices can accidentally call 911: Here's why you shouldn't hang upon April 30, 2024 at 5:00 pm
Local emergency services providers said they are receiving accidental 911 alerts from people’s smart devices. In some cases, it’s been prompted by something as simple as dropping an Apple Watch onto a hard floor. According to Cassandra Olney ...
via Bing News