Rice, Indian Institute researchers use cryo-mill to turn circuit boards into separated powders
Researchers at Rice University and the Indian Institute of Science have an idea to simplify electronic waste recycling: Crush it into nanodust.
Specifically, they want to make the particles so small that separating different components is relatively simple compared with processes used to recycle electronic junk now.
Chandra Sekhar Tiwary, a postdoctoral researcher at Rice and a researcher at the Indian Institute of Science in Bangalore, uses a low-temperature cryo-mill to pulverize electronic waste – primarily the chips, other electronic components and polymers that make up printed circuit boards (PCBs) — into particles so small that they do not contaminate each other.
Then they can be sorted and reused, he said.
The process is the subject of a Materials Today paper by Tiwary, Rice materials scientist Pulickel Ajayan and Indian Institute professors Kamanio Chattopadhyay and D.P. Mahapatra.
The researchers intend it to replace current processes that involve dumping outdated electronics into landfills, or burning or treating them with chemicals to recover valuable metals and alloys. None are particularly friendly to the environment, Tiwary said.
“In every case, the cycle is one way, and burning or using chemicals takes a lot of energy while still leaving waste,” he said. “We propose a system that breaks all of the components – metals, oxides and polymers – into homogenous powders and makes them easy to reuse.”
The researchers estimate that so-called e-waste will grow by 33 percent over the next four years, and by 2030 will weigh more than a billion tons. Nearly 80 to 85 percent of often-toxic e-waste ends up in an incinerator or a landfill, Tiwary said, and is the fastest-growing waste stream in the United States, according to the Environmental Protection Agency.
The answer may be scaled-up versions of a cryo-mill designed by the Indian team that, rather than heating them, keeps materials at ultra-low temperatures during crushing.
Cold materials are more brittle and easier to pulverize, Tiwary said. “We take advantage of the physics. When you heat things, they are more likely to combine: You can put metals into polymer, oxides into polymers. That’s what high-temperature processing is for, and it makes mixing really easy.
“But in low temperatures, they don’t like to mix. The materials’ basic properties – their elastic modulus, thermal conductivity and coefficient of thermal expansion – all change. They allow everything to separate really well,” he said.
The test subjects in this case were computer mice – or at least their PCB innards. The cryo-mill contained argon gas and a single tool-grade steel ball. A steady stream of liquid nitrogen kept the container at 154 kelvins (minus 182 degrees Fahrenheit).
When shaken, the ball smashes the polymer first, then the metals and then the oxides just long enough to separate the materials into a powder, with particles between 20 and 100 nanometers wide. That can take up to three hours, after which the particles are bathed in water to separate them.
“Then they can be reused,” he said. “Nothing is wasted.”
Learn more: Pulverizing e-waste is green, clean — and cold
Further information about: Coefficient of Linear Thermal Expansion (CLTE)
The Latest on: Electronic waste recycling
[google_news title=”” keyword=”electronic waste recycling” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Electronic waste recycling
- Advancing India's Circular Economy: The Journey in E-Waste and Plastic Waste Managementon April 27, 2024 at 8:21 am
Government entities, in collaboration with private enterprises, are establishing e-waste collection points and recycling facilities across the country.
- Senator Addabbo’s e-waste recycle extravaganza returns to Woodhaven May 5on April 26, 2024 at 7:35 am
Old and broken electronics, including computers, monitors, handheld devices such as smartphones, networking devices and electronic accessories like keyboards ...
- E-Waste Start-ups Capitalizing On EV Battery Recyclingon April 25, 2024 at 4:47 am
Lohum Cleantech's over 50% revenues are already derived from the EV battery recycling vertical spanning both domestic and international markets.
- Household waste collection will be accepted May 4; tire, electronic drop-offs are lateron April 25, 2024 at 2:19 am
Solid Waste District coordinator Jim Skora said a grant has allowed his office to make changes to the fairground waste collection events.
- Cut down on electronic waste in Minnesotaon April 24, 2024 at 2:30 pm
According to a study last year, only about 24% of Minnesota electronics waste gets captured for recycling. It's estimated that there is $2.8 billion worth of metals in Minnesota's electronic waste ...
- Minnesota electronics recycling bill stalls in Senateon April 24, 2024 at 9:20 am
A Minnesota electronics recycling bill, HF3566, has reportedly stalled in the Senate, according to Fox 9.
- Out with the old: Toss those hazardous materials the proper way at Holmes Recycling Dayon April 23, 2024 at 1:57 am
To combat illegal dumping, some prohibited items will be accepted on recycling day only, such as passenger tires and light truck tires.
- Minnesota's Electronics Recycling Bill Pushed for Earth Dayon April 22, 2024 at 10:41 pm
The electronic recycling bill updates Minnesota's outdated electronics waste law, which was passed in 2007, the year the first iPhone was introduced. The law primarily targets computers and ...
- All that e-waste is full of metals that could be recycled for clean techon April 19, 2024 at 12:29 am
This story was first published by Grist . To build all of the solar panels, wind turbines, electric vehicle batteries, and other technologies necessary to fight climate change, we’re going to need a ...
via Bing News