FoamBot is not autonomous … yet
Appealing though general-purpose humanoid robots like C-3PO may be to many of us, real-life robots are usually most effective when they’re designed for one specific purpose. In some situations, however, that purpose might not be known until the robot is in the field – at a disaster site, for instance, an autonomous robot might discover that it needs to squirm through debris, even though it wasn’t designed to do so. One attempted solution to this problem has involved creating modular robots, that can take themselves apart and then reconfigure themselves as needed. Scientists from the University of Pennsylvania’s Modular Robotics Laboratory, however, are taking a slightly different approach. They’ve created a robot that can build other purpose-specific robots, using electromechanical modules and self-hardening foam.
First of all, what’s wrong with using just the interlocking modules and no foam? Well, if the modules are only used where they’re really needed (such as in areas that bend or perform sensory functions), and the rest of the robot is made out of foam, the resulting machine will be much lighter and less expensive than would be the case otherwise.
The base of the robot-building robot (aka FoamBot) is a small motorized cart, originally designed for the Mini-PR2 robot. On this cart are a container of off-the-shelf insulation foam, a spring clamp-operated valve, a foam-dispensing nozzle, and an actuator that raises and lowers the nozzle. A laser pointer mounted on the nozzle allows the robot’s human operator to aim the foam spray – FoamBot is not autonomous … yet.
Read more . . .
Bookmark this page for “robots creating robots” and check back regularly as these articles update on a very frequent basis. The view is set to “news”. Try clicking on “video” and “2” for more articles.
