An engineering research team at the University of Alberta has invented a new transistor that could revolutionize thin-film electronic devices.
Their findings, published in the prestigious science journal Nature Communications (read the article here), could open the door to the development of flexible electronic devices with applications as wide-ranging as display technology to medical imaging and renewable energy production.
The team was exploring new uses for thin film transistors (TFT), which are most commonly found in low-power, low-frequency devices like the display screen you’re reading from now. Efforts by researchers and the consumer electronics industry to improve the performance of the transistors have been slowed by the challenges of developing new materials or slowly improving existing ones for use in traditional thin film transistor architecture, known technically as the metal oxide semiconductor field effect transistor (MOSFET).
But the U of A electrical engineering team did a run-around on the problem. Instead of developing new materials, the researchers improved performance by designing a new transistor architecture that takes advantage of a bipolar action. In other words, instead of using one type of charge carrier, as most thin film transistors do, it uses electrons and the absence of electrons (referred to as “holes”) to contribute to electrical output. Their first breakthrough was forming an ‘inversion’ hole layer in a ‘wide-bandgap’ semiconductor, which has been a great challenge in the solid-state electronics field.
Once this was achieved, “we were able to construct a unique combination of semiconductor and insulating layers that allowed us to inject “holes” at the MOS interface,” said Gem Shoute, a PhD student in the Department of Electrical and Computer Engineering who is lead author on the article. Adding holes at the interface increased the chances of an electron “tunneling” across a dielectric barrier. Through this phenomenon, a type of quantum tunnelling, “we were finally able to achieve a transistor that behaves like a bipolar transistor.”
“It’s actually the best performing [TFT] device of its kind—ever,” said materials engineering professor Ken Cadien, a co-author on the paper. “This kind of device is normally limited by the non-crystalline nature of the material that they are made of”
The dimension of the device itself can be scaled with ease in order to improve performance and keep up with the need of miniaturization. An advantage that modern TFTs lack. The transistor has power-handling capabilities at least 10 times greater than commercially produced thin film transistors.
Electrical engineering professor Doug Barlage, who is Shoute’s PhD supervisor and one of the paper’s lead authors, says his group was determined to try new approaches and break new ground. He says the team knew it could produce a high-power thin film transistor—it was just a matter of finding out how.
“Our goal was to make a thin film transistor with the highest power handling and switching speed possible. Not many people want to look into that, but the raw properties of the film indicated dramatic performance increase was within reach,” he said. “The high quality sub 30 nanometre (a human hair is 50,000 nanometres wide) layers of materials produced by Professor Cadien’s group enabled us to successfully try these difficult concepts”
In the end, the team took advantage of the very phenomena other researchers considered roadblocks.
“Usually tunnelling current is considered a bad thing in MOSFETs and it contributes to unnecessary loss of power, which manifests as heat,” explained Shoute. “What we’ve done is build a transistor that considers tunnelling current a benefit.”
The team has filed a provisional patent on the transistor. Shoute says the next step is to put the transistor to work “in a fully flexible medium and apply these devices to areas like biomedical imaging, or renewable energy.”
Learn more: Researchers engineer an electronics first opening door to flexible electronics
The Latest on: Flexible electronics
[google_news title=”” keyword=”flexible electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Flexible electronics
- Electrically powered artificial muscle fibers: The new power for soft actuationon August 2, 2024 at 7:29 am
Electrically powered artificial muscle fibers, with excellent mechanical performance, flexibility, and scalability, are becoming a new power system for intelligent devices.
- Chip Industry Week in Reviewon August 2, 2024 at 12:01 am
Cheaper EUV; Applied Materials funding issues; export rule changes; semi equipment report; chip industry earnings releases; Alphawave's UCIe die-die IP; Lams new cryo etch; Noyce award.
- Stretchable electronics might make their way onto the market thanks to roll-to-roll processon July 18, 2024 at 12:10 pm
Electronics have evolved over the years to supersede simply enhancing day-to-day life to becoming almost seamlessly integrated with daily life. People have become accustomed to wearable electronics, ...
- Completely Stretchy Lithium-Ion Battery for Flexible Electronicson July 17, 2024 at 5:00 pm
When you think of a battery, you probably don’t think stretchy. But batteries will need this shape-shifting quality to be incorporated into flexible electronics, which are gaining traction for ...
- Flexible electronics researchers develop a completely stretchy lithium-ion batteryon July 17, 2024 at 5:00 am
When you think of a battery, you probably don't think of stretchy material. But batteries will need this shape-shifting quality to be incorporated into flexible electronics, which are gaining traction ...
- Flexible Electronics: From Materials to Devices Guozhen Shen and Zhiyong Fan, Editorson July 9, 2024 at 5:00 pm
World Scientific, 2016 476 pages, $178.00 (e-book $142.00) ISBN 978-981-4651-98-1 This book gives an excellent introduction to flexible electronics, which refers to the science and technology of using ...
- New method for transfer printing of flexible electronicson June 24, 2024 at 5:00 pm
Hence for building flexible/stretchable devices, the electronics must be “transfer printed” from solid to soft substrate. Existing transfer printing technologies issues such as the use of ...
- A new dawn for flexible electronics: Eliminating energy wasteon March 25, 2024 at 1:38 pm
This breakthrough promises flexible electronics capable of reliable performance at lower power levels and substantially reduced energy loss, with the five-stage ring oscillators showcasing ...
- Flexible and Large-Area Electronicson March 9, 2024 at 4:58 am
A brand new concept in academic publishing and scholarly communication, this new series in flexible and large-area electronics combines the best features of journals and books. This innovative new ...
- About the Editorson November 15, 2021 at 5:54 am
His current research interests include organic/plastic/flexible electronics, bioelectronics, nanomaterial, nanoelectronics and polymer chemistry. Ravinder Dahiya is Professor in the Department of ...
via Bing News