In the future, a delayed flight due to ice will be no cause for a meltdown.
A group of researchers at the University of Illinois at Urbana-Champaign and Kyushu University has developed a way to remove ice and frost from surfaces extremely efficiently, using less than 1% of the energy and less than 0.01% of the time needed for traditional defrosting methods.
The group describes the method in Applied Physics Letters, from AIP Publishing. Instead of conventional defrosting, which melts all the ice or frost from the top layer down, the researchers established a technique that melts the ice where the surface and the ice meet, so the ice can simply slide off.
“The work was motivated by the large energy efficiency losses of building energy systems and refrigeration systems due to the need to do intermittent defrosting. The systems must be shut down, the working fluid is heated up, then it needs to be cooled down again,” said author Nenad Miljkovic, at UIUC. “This eats up a lot of energy when you think of the yearly operational costs of running intermittent defrosting cycles.”
According to the authors, the biggest source of inefficiency in conventional systems is that much of the energy used for de-icing goes into heating other components of the system rather than directly heating the frost or ice. This increases energy consumption and system downtime.
Instead, the researchers proposed delivering a pulse of very high current where the ice and the surface meet to create a layer of water. To ensure the pulse reaches the intended space rather than melting the exposed ice, the researchers apply a thin coating of indium tin oxide (ITO) — a conductive film often used for defrosting — to the surface of the material. Then, they leave the rest to gravity.
To test this, the scientists defrosted a small glass surface cooled to minus 15.1 degrees Celsius — about as cold as the warmest parts of Antarctica — and to minus 71 degrees Celsius — colder than the coldest parts of Antarctica. These temperatures were chosen to model heating, ventilation, air conditioning and refrigeration applications and aerospace applications, respectively. In all tests, the ice was removed with a pulse lasting less than one second.
In a real, 3D system, gravity would be assisted by air flow. “At scale, it all depends on the geometry,” Miljkovic said. “However, the efficiency of this approach should definitely still be much better than conventional approaches.”
The group hasn’t studied more complicated surfaces like airplanes yet, but they think it’s an obvious future step.
“They are a natural extension as they travel fast, so the shear forces on the ice are large, meaning only a very thin layer at the interface needs to be melted in order to remove the ice,” Miljkovic said. “Work would be needed to figure out how we can coat curved components conformally with the ITO and to figure out how much energy we would need.”
The researchers hope to work with external companies on scaling up their approach for commercialization.
Learn more: Defrosting Surfaces in Seconds
The Latest on: Deicing
[google_news title=”” keyword=”deicing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Deicing
- Analyst Ratings For Compass Minerals Intlon April 26, 2024 at 12:00 pm
Return on Assets (ROA): Compass Minerals Intl's ROA lags behind industry averages, suggesting challenges in maximizing returns from its assets. With an ROA of -4.16%, the company may face hurdles in ...
- Funding Our Infrastructureon April 26, 2024 at 8:26 am
Mayor Bruce Harrell and council leadership are emphasizing the plan’s focus on issues like potholes, sidewalks, and costly infrastructure repairs over the ambitious new initiatives and projects it ...
- Tennessee supply chain industry is booming, but what's missing is enough workerson April 25, 2024 at 4:00 pm
Opinion: Institutions of higher education in Tennessee are working to train enough supply chain managers to fill a multimillion worker need.
- China’s space station was hit by space junkon April 24, 2024 at 6:15 pm
China's space agency says it has successfully repaired damage to its space station after it was struck by space debris.
- Worms eating airport deicer fluid could be greener approach to airline wasteon April 23, 2024 at 11:40 am
To safely fly when it’s cold out, special fluid has to be sprayed on planes. And it creates a lot of waste. So Tri-Cities airport leaders have turned to … worms.
- The Second Citation: Unique Features On The Cessna Citation IIon April 21, 2024 at 12:00 am
The Citation II was powered by two Pratt & Whitney Canada JT15D engines. These provided just under 2,500 pounds of thrust each. These engines and other design features helped the aircraft reach cruise ...
- Sales Of Jeep, Stellantis' Crown Jewel, Have Slumped, Posing Added Risk To The Stockon April 18, 2024 at 7:07 am
Stellantis, the parent company of Jeep, is on a mission to reverse falling sales and restore the brand's market share. Read what this could mean for STLA stock.
- Roads & Bridges National Work Zone Awareness Week: Team Leader at MSHA Robert Lewison April 17, 2024 at 11:47 pm
Join senior managing editor Gavin Jenkins as he talks to Robert Lewis, a team leader at the Maryland state Highway Administration (MSHA) about National Work Zone Safety Week.
- Compass Minerals: How Did We End Up Here?on April 17, 2024 at 8:36 am
Compass Minerals once again had to report a quarterly loss with failing projects and a horrible stock and business performance. Read more on CMP stock here.
- Philadelphia International Airport Unveils State-of-the-Art Operations Center to Enhance Efficiency and Safetyon April 14, 2024 at 6:00 am
The Philadelphia International Airport (PHL) recently inaugurated its new Airport Operations Center (AOC), a centralized hub designed to streamline and enhance the efficiency and safety of airport ...
via Bing News