Costs less than 50 cents a year to run
The basic idea with radiators is that they should, well, radiate heat out into the room. Given that they’re almost always located against walls, however, much of the heat coming off the back of them is just absorbed by those walls. What someone should make is a gizmo that draws the heated air out from behind a radiator, and blows it over to where it will be appreciated. Well, that’s what the Radiator Booster is.
Essentially a temperature-activated fan, the Radiator Booster has been around for a few years now. Just recently, however, the new-and-improved MK3 model was introduced.
The Polypropylene device sits on top of your radiator, hooked up to mains power – it reportedly costs less than 50 cents a year to run. A red LED on the unit indicates that it is on, and waiting for the radiator to exceed a temperature of at least 30ºC (86ºF). Once that happens, the Booster’s fan will kick in, and the light will turn green. After the radiator has dropped back below that “threshold temperature,” the fan will once again stop, and the LED will turn to a flashing green.
Because the Radiator Booster puts a larger amount of heat out into the room where people can feel it, users should be able to set their thermostats lower, yet maintain the same level of comfort that they did before getting the device.
Read more . . .
Bookmark this page for “heating breakthrough” and check back regularly as these articles update on a very frequent basis. The view is set to “news”. Try clicking on “video” and “2” for more articles.