Most techniques to prevent frost and ice formation on surfaces rely heavily on heating or liquid chemicals that need to be repeatedly reapplied because they easily wash away. Even advanced anti-icing materials have problems functioning under conditions of high humidity and subzero conditions, when frost and ice formation go into overdrive.
Now, researchers from the University of Illinois at Chicago College of Engineering describe for the first time several unique properties of materials known as phase-switching liquids, or PSLs, that hold promise as next-generation anti-icing materials. PSLs can delay ice and frost formation up to 300 times longer than state-of-the-art coatings being developed in laboratories. Their findings are published in the journal Advanced Materials.
“Ice and frost pose hazards to people and can damage machines and reduce functionality of some technologies, especially those related to energy and transportation, so we have been interested in finding possible ways to overcome their harmful effects, and phase-switching liquids are very promising candidates,” said Sushant Anand, assistant professor of mechanical and industrial engineering and corresponding author of the paper.
PSLs are a subset of phase change materials that have melting points higher than the freezing point of water, which is 0 degrees Celsius, meaning that they would be solids at a range of temperatures close to that at which water freezes. Examples of such materials include cyclohexane, cyclooctane, dimethyl sulfoxide, glycerol, and more.
“At sub-zero temperatures, all PSLs turn solid. So, on a winter day, you could coat a surface where you don’t want icing with a PSL material and it would remain there much longer than most deicing liquids, which demand frequent reapplication,” said Rukmava Chatterjee, a doctoral student in the UIC College of Engineering and the first author of the paper.
While researchers have known about phase change materials for a long time, their unique anti-icing and anti-frosting properties have not been investigated before, Chatterjee explained. Decades ago, Daniel Beysens, research director of the physics and mechanics of heterogeneous media laboratory at Université de recherche Paris Sciences et Lettres and a co-author on the paper, had observed that when materials like cyclohexane were cooled just below their melting points, water droplets condensing on the surface would move around erratically.
“We had looked into this erratic motion before, and we had shown that it originated from the melting of the cyclohexane induced by the heat released into these materials during water droplet condensation,” Anand said.
In their current research, Anand and Chatterjee cooled a range of PSLs to -15 degrees Celsius, rendering them all solid. Under high humidity conditions, they noticed that the solidified PSLs melted directly underneath and in the immediate vicinity of water droplets condensing on the PSLs.
“We were expecting that the erratic droplet motion would stop upon cooling the surface to -15C. But to our surprise, we found that the droplets kept on showing the same hopping motion even at very low temperatures,” Anand said. “It turns out that PSLs are extremely adept at trapping this released heat.
“This quality, combined with the fact that condensed water droplets become extremely mobile on these cooled PSLs means that the formation of frost is significantly delayed. Yes, at a certain point, ice does eventually form and that is inevitable, but some of the PSLs we tested are water soluble, and this contributes to their anti-freezing properties and can help delay ice formation much longer than even the advanced anti-icing coatings.”
Anand and Chatterjee saw the same frost delaying effect with the PSLs even when they were applied as extremely thin layers to objects.
“In our first set of experiments, the PSL coating we used was about 3 millimeters thick. But we also tested them as very thin coatings, like a film, and still saw the same freezing delay effect,” Anand said. “This means that we can potentially use PSLs to coat objects like car windshields or turbine blades without compromising the object’s functionality.”
In further experiments, the researchers found that PSLs have a wide range of optical transparencies, can self-repair after being scratched and can purge liquid-borne contaminants.
“The unique properties of PSLs, which we describe for the first time in this paper, make them excellent candidates for next-generation materials to prevent frost and ice development on surfaces,” Anand said.
Because PSLs are solids at low temperatures, he anticipates that they wouldn’t need to be applied as often as liquid anti-icing agents because they would have better staying power.
“But, of course, we need to conduct additional experiments to determine their limits and figure out if there are ways we can further maximize their ice/frost-repelling abilities,” he said.
Learn more: Materials could delay frost up to 300 times longer than existing anti-icing coatings
The Latest on: Anti-icing materials
[google_news title=”” keyword=”anti-icing materials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Anti-icing materials
- Vietnam Anti-icing Coating Market Latest Trends, Segmentation Analysis, Share, Size, and Forecast to 2024 to 2032on May 2, 2024 at 12:30 am
According to the latest report by Report Ocean, titled this “Vietnam Anti-icing Coating Market” Report gives evaluation and insights primarily based on authentic consultations with necessary gamers ...
- Pixio PX248 Wave review: A monitor for fashion, flair, and clarity on a budgeton May 1, 2024 at 3:42 am
The Pixio PX248 Wave is an affordable monitor with good motion clarity and design that’s perfect for gamers who want a unique look.
- Best SUVs for 2022on April 27, 2024 at 5:41 pm
But that's just the icing on the cake ... the folks at Alpina upgraded the interior with high-end materials just about everywhere. Of course, it's not a cheap proposition at $142,295 including ...
- RICE Method for Injurieson April 23, 2024 at 5:00 pm
Today, recommendations on the time spent icing and resting an injury are shifting ... The PEACE (Protection, Elevation, Avoid anti-inflammatories, Compression, Education) approach is to be ...
- FAA discovers more faults with Boeing planes, issues new safety guidelineson March 4, 2024 at 12:08 pm
Several FAA reports into the concerns about the anti-icing system and the Dreamliner ... engaged in some unauthorized exports of defence material and technical data to Israel, Turkey and Lebanon.
- Boeing still hasn't fixed this problem on Max jets, so it's asking for an exemption to safety ruleson January 5, 2024 at 3:18 pm
In the meantime, they told pilots to limit use of an anti-icing system in some conditions ... which has engine inlets made from carbon composite materials rather than metal. A Boeing spokeswoman ...
- The Best Pickleball Paddles To Dominate the Game in 2024on July 4, 2023 at 12:53 pm
After personally taking up plenty of paddles and icing our pickleball elbows afterward ... Pickleball paddles are most easily categorized by their materials and shape, and there are many ...
- Materials Scienceon April 6, 2022 at 10:36 pm
Stamatopoulos, Christos Hemrle, Jaroslav Wang, Danhong and Poulikakos, Dimos 2017. Exceptional Anti-Icing Performance of Self-Impregnating Slippery Surfaces. ACS ...
- 68 Best Gifts for Men Who Have Everythingon December 2, 2021 at 4:00 pm
As a feel-good bonus, each Nanoloft Puffy Blanket includes synthetic materials upcycled from 96 ... fogproof and feature scratch-resistant lenses and anti-reflective coating, so they’ll work ...
- Anti-icers and Deicers (chemicals) Informationon February 11, 2018 at 6:45 am
Deicing and anti-icing involves the removal and prevention of snow ... but contain a large amount of organic content. The introduction of this material to rivers and lakes can elevate oxygen demand ...
via Bing News