Using a simple layer-by-layer coating technique, researchers from the U.S. and Korea have developed a paper-based flexible supercapacitor that could be used to help power wearable devices. The device uses metallic nanoparticles to coat cellulose fibers in the paper, creating supercapacitor electrodes with high energy and power densities – and the best performance so far in a textile-based supercapacitor.
By implanting conductive and charge storage materials in the paper, the technique creates large surface areas that function as current collectors and nanoparticle reservoirs for the electrodes. Testing shows that devices fabricated with the technique can be folded thousands of times without affecting conductivity.
“This type of flexible energy storage device could provide unique opportunities for connectivity among wearable and internet of things devices,” said Seung Woo Lee, an assistant professor in the Woodruff School of Mechanical Engineering at the Georgia Institute of Technology. “We could support an evolution of the most advanced portable electronics. We also have an opportunity to combine this supercapacitor with energy-harvesting devices that could power biomedical sensors, consumer and military electronics, and similar applications.”
The research, done with collaborators at Korea University, was supported by the National Research Foundation of Korea and reported September 14 in the journal Nature Communications.
Energy storage devices are generally judged on three properties: their energy density, power density and cycling stability. Supercapacitors often have high power density, but low energy density – the amount of energy that can be stored – compared to batteries, which often have the opposite attributes. In developing their new technique, Lee and collaborator Jinhan Cho from the Department of Chemical and Biological Engineering at Korea University set out to boost energy density of the supercapacitors while maintaining their high power output.
They began by dipping paper samples into a beaker of solution containing an amine surfactant material designed to bind the gold nanoparticles to the paper. Next they dipped the paper into a solution containing gold nanoparticles. Because the fibers are porous, the surfactants and nanoparticles enter the fibers and become strongly attached, creating a conformal coating on each fiber.
By repeating the dipping steps, the researchers created a conductive paper on which they added alternating layers of metal oxide energy storage materials such as manganese oxide. The ligand-mediated layer-by-layer approach helped minimize the contact resistance between neighboring metal and/or metal oxide nanoparticles. Using the simple process done at room temperatures, the layers can be built up to provide the desired electrical properties.
“It’s basically a very simple process,” Lee said. “The layer-by-layer process, which we did in alternating beakers, provides a good conformal coating on the cellulose fibers. We can fold the resulting metallized paper and otherwise flex it without damage to the conductivity.”
Though the research involved small samples of paper, the solution-based technique could likely be scaled up using larger tanks or even a spray-on technique. “There should be no limitation on the size of the samples that we could produce,” Lee said. “We just need to establish the optimal layer thickness that provides good conductivity while minimizing the use of the nanoparticles to optimize the tradeoff between cost and performance.”
The researchers demonstrated that their self-assembly technique improves several aspects of the paper supercapacitor, including its areal performance, an important factor for measuring flexible energy-storage electrodes. The maximum power and energy density of the metallic paper-based supercapacitors are estimated to be 15.1 mW/cm2 and 267.3 uW/cm2, respectively, substantially outperforming conventional paper or textile supercapacitors.
The next steps will include testing the technique on flexible fabrics, and developing flexible batteries that could work with the supercapacitors. The researchers used gold nanoparticles because they are easy to work with, but plan to test less expensive metals such as silver and copper to reduce the cost.
During his Ph.D. work, Lee developed the layer-by-layer self-assembly process for energy storage using different materials. With his Korean collaborators, he saw a new opportunity to apply that to flexible and wearable devices with nanoparticles.
“We have nanoscale control over the coating applied to the paper,” he added. “If we increase the number of layers, the performance continues to increase. And it’s all based on ordinary paper.”
Learn more: Paper-Based Supercapacitor Uses Metal Nanoparticles to Boost Energy Density
The Latest on: Supercapacitor
[google_news title=”” keyword=”supercapacitor” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Sustainable Manufacturing Market worth $367.2 billion by 2029 - Exclusive Report by MarketsandMarkets™on May 6, 2024 at 7:16 am
The global sustainable manufacturing market is expected to be valued at USD 215.4 billion in 2024 and is projected to reach USD 367.2 billion by 2029; it is expected to grow at a CAGR of 11.3 % from ...
- IIT-Roorkee develops ‘1st of its kind’ energy storage supercapacitoron May 3, 2024 at 11:58 pm
Researchers at IIT-Roorkee have developed a thin film-based flexible supercapacitor using nanostructured materials for large-scale energy storage. This breakthrough in supercapacitor technology opens ...
- Scientists design super-battery made with cheap, readily affordable chemical element, Na — Salt-based cell has surprisingly good energy density and charges in secondson April 29, 2024 at 9:50 pm
Researchers at the Korea Advanced Institute of Science and Technology (KAIST) have developed a high-performance, hybrid sodium-ion battery that charges rapidly and offers impressive energy ...
- Rove R2-4K dash cam review: Good captures, GPS, and an appon April 29, 2024 at 8:08 am
The Rove R2-4K is a and affordable, single-channel dash cam with integrated GPS as well as phone connectivity. Captures are good if not the best we've seen.
- Scientists Uncover Surprising Efficiency of “Messy” Supercapacitorson April 26, 2024 at 10:41 pm
The energy density of supercapacitors, devices similar to batteries that can recharge rapidly in just seconds or minutes, can be improved by increasing the ‘messiness’ of their internal structure. Res ...
- Structural disorder key to high-capacitance carbon electrodeson April 25, 2024 at 1:31 am
Structural disorder increases the capacitance of carbon supercapacitor electrodes, according to new findings from a team of UK-based researchers. The discovery could lead to the development of ...
- Rubber-like stretchable energy storage device fabricated with laser precisionon April 23, 2024 at 5:00 pm
Scientists use laser ablation technology to develop a deformable micro-supercapacitor.
- A Supercapacitor From Mushroomson April 1, 2024 at 5:16 pm
The supercapacitor is an extremely promising energy storage technology, and though they have yet to reach parity with the best batteries in terms of energy density, offers considerable promise for ...
- Is cement the solution to storing renewable energy? Engineers at MIT think so.on December 19, 2023 at 7:48 pm
And the best part, the researchers say, is their system, called a supercapacitor, could be built from three of the world’s most abundant materials: cement, water, and carbon. The researchers, who work ...
- Textiles and Clothing Newson October 25, 2023 at 5:00 pm
Powering Wearable Technology With MXene Textile Supercapacitor 'Patch' Jan. 30, 2023 — Researchers are one step closer to making wearable textile technology a reality. Materials scientists have ...
via Google News and Bing News