Efficient method for making single-atom-thick, wafer-scale materials opens up opportunities in flexible electronics.
Since the 2003 discovery of the single-atom-thick carbon material known as graphene, there has been significant interest in other types of 2-D materials as well.
These materials could be stacked together like Lego bricks to form a range of devices with different functions, including operating as semiconductors. In this way, they could be used to create ultra-thin, flexible, transparent and wearable electronic devices.
However, separating a bulk crystal material into 2-D flakes for use in electronics has proven difficult to do on a commercial scale.
The existing process, in which individual flakes are split off from the bulk crystals by repeatedly stamping the crystals onto an adhesive tape, is unreliable and time-consuming, requiring many hours to harvest enough material and form a device.
Now researchers in the Department of Mechanical Engineering at MIT have developed a technique to harvest 2-inch diameter wafers of 2-D material within just a few minutes. They can then be stacked together to form an electronic device within an hour.
The technique, which they describe in a paper published in the journal Science, could open up the possibility of commercializing electronic devices based on a variety of 2-D materials, according to Jeehwan Kim, an associate professor in the Department of Mechanical Engineering, who led the research.
The paper’s co-first authors were Sanghoon Bae, who was involved in flexible device fabrication, and Jaewoo Shim, who worked on the stacking of the 2-D material monolayers. Both are postdocs in Kim’s group.
The paper’s co-authors also included students and postdocs from within Kim’s group, as well as collaborators at Georgia Tech, the University of Texas, Yonsei University in South Korea, and the University of Virginia. Sang-Hoon Bae, Jaewoo Shim, Wei Kong, and Doyoon Lee in Kim’s research group equally contributed to this work.
“We have shown that we can do monolayer-by-monolayer isolation of 2-D materials at the wafer scale,” Kim says. “Secondly, we have demonstrated a way to easily stack up these wafer-scale monolayers of 2-D material.”
The researchers first grew a thick stack of 2-D material on top of a sapphire wafer. They then applied a 600-nanometer-thick nickel film to the top of the stack.
Since 2-D materials adhere much more strongly to nickel than to sapphire, lifting off this film allowed the researchers to separate the entire stack from the wafer.
What’s more, the adhesion between the nickel and the individual layers of 2-D material is also greater than that between each of the layers themselves.
As a result, when a second nickel film was then added to the bottom of the stack, the researchers were able to peel off individual, single-atom thick monolayers of 2-D material.
That is because peeling off the first nickel film generates cracks in the material that propagate right through to the bottom of the stack, Kim says.
Once the first monolayer collected by the nickel film has been transferred to a substrate, the process can be repeated for each layer.
“We use very simple mechanics, and by using this controlled crack propagation concept we are able to isolate monolayer 2-D material at the wafer scale,” he says.
The universal technique can be used with a range of different 2-D materials, including hexagonal boron nitride, tungsten disulfide, and molybdenum disulfide.
In this way it can be used to produce different types of monolayer 2-D materials, such as semiconductors, metals, and insulators, which can then be stacked together to form the 2-D heterostructures needed for an electronic device.
“If you fabricate electronic and photonic devices using 2-D materials, the devices will be just a few monolayers thick,” Kim says. “They will be extremely flexible, and can be stamped on to anything,” he says.
The process is fast and low-cost, making it suitable for commercial operations, he adds.
The researchers have also demonstrated the technique by successfully fabricating arrays of field-effect transistors at the wafer scale, with a thickness of just a few atoms.
“The work has a lot of potential to bring 2-D materials and their heterostructures towards real-world applications,” says Philip Kim, a professor of physics at Harvard University, who was not involved in the research.
The researchers are now planning to apply the technique to develop a range of electronic devices, including a nonvolatile memory array and flexible devices that can be worn on the skin.
They are also interested in applying the technique to develop devices for use in the “internet of things,” Kim says.
“All you need to do is grow these thick 2-D materials, then isolate them in monolayers and stack them up. So it is extremely cheap — much cheaper than the existing semiconductor process. This means it will bring laboratory-level 2-D materials into manufacturing for commercialization,” Kim says.
“That makes it perfect for IoT networks, because if you were to use conventional semiconductors for the sensing systems it would be expensive.”
Learn more: Researchers quickly harvest 2-D materials, bringing them closer to commercialization
The Latest on: 2-D materials
[google_news title=”” keyword=”2D materials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 2-D materials
- Researchers develop a novel strategy for growing two-dimensional transition metal dichalcogenideson May 23, 2024 at 9:06 am
This research represents a continuation of the team's ongoing exploration into phase structure control and physical property studies of 2D materials. Dr. Liu Meizhuang, the first author of the ...
- 2D materials: A catalyst for future quantum technologieson May 20, 2024 at 6:10 pm
Researchers have discovered that a 'single atomic defect' in a layered 2D material can hold onto quantum information for microseconds at room temperature. This underscores the broader potential of 2D ...
- Scientists discover single atom defect in 2D material can hold quantum information at room temperatureon May 20, 2024 at 10:03 am
Scientists have discovered that a "single atomic defect" in a layered 2D material can hold onto quantum information for microseconds at room temperature, underscoring the potential of 2D materials in ...
- Rapid Test for Topological 2D Materials: A New Milestoneon May 17, 2024 at 10:30 am
Researchers from the Würzburg-Dresden Cluster of Excellence ct.qmat have created a technique that makes it easier and faster to identify two-dimensional topological materials. It is featured as the ...
- Ion irradiation offers promise for 2D material probingon May 17, 2024 at 10:10 am
Two-dimensional materials such as graphene promise to form the basis of incredibly small and fast technologies, but this requires a detailed understanding of their electronic properties. New research ...
- Beyond Binary: 2D Magnetic Devices Enable Brain-Like Probabilistic Computerson May 10, 2024 at 8:05 pm
University of Wyoming researchers have developed a new method to control magnetic states in 2D materials, promising revolutionary advancements in computing technology and energy efficiency. Imagine a ...
- Columbia researchers “unzip” 2D materials with laserson May 7, 2024 at 11:58 am
in samples of a layered 2D material called hexagonal boron nitride (hBN). While exploring potential applications of their nanopatterned structures with colleagues in the Physics Department ...
- Researchers 'unzip' 2D materials with laserson May 7, 2024 at 8:58 am
in samples of a layered 2D material called hexagonal boron nitride (hBN). While exploring potential applications of their nanopatterned structures with colleagues in the Physics Department ...
- 2D materials rotate light polarizationon April 21, 2024 at 5:00 pm
The 2D materials used by the researchers are only a few atomic layers thick and therefore a hundred thousand times thinner than a human hair. "In the future, two-dimensional materials could become ...
via Bing News