Steelmaking, a major emitter of climate-altering gases, could be transformed by a new process developed at MIT.
Anyone who has seen pictures of the giant, red-hot cauldrons in which steel is made — fed by vast amounts of carbon, and belching flame and smoke — would not be surprised to learn that steelmaking is one of the world’s leading industrial sources of greenhouse gases. But remarkably, a new process developed by MIT researchers could change all that.
The new process even carries a couple of nice side benefits: The resulting steel should be of higher purity, and eventually, once the process is scaled up, cheaper. Donald Sadoway, the John F. Elliott Professor of Materials Chemistry at MIT and senior author of a new paper describing the process, says this could be a significant “win, win, win” proposition.
The paper, co-authored by Antoine Allanore, the Thomas B. King Assistant Professor of Metallurgy at MIT, and former postdoc Lan Yin (now a postdoc at the University of Illinois at Urbana-Champaign), has just been published in the journal Nature.
Worldwide steel production currently totals about 1.5 billion tons per year. The prevailing process makes steel from iron ore — which is mostly iron oxide — by heating it with carbon; the process forms carbon dioxide as a byproduct. Production of a ton of steel generates almost two tons of CO2 emissions, according to steel industry figures, accounting for as much as 5 percent of the world’s total greenhouse-gas emissions.
The industry has met little success in its search for carbon-free methods of manufacturing steel. The idea for the new method, Sadoway says, arose when he received a grant from NASA to look for ways of producing oxygen on the moon — a key step toward future lunar bases.
Sadoway found that a process called molten oxide electrolysis could use iron oxide from the lunar soil to make oxygen in abundance, with no special chemistry. He tested the process using lunar-like soil from Meteor Crater in Arizona — which contains iron oxide from an asteroid impact thousands of years ago — finding that it produced steel as a byproduct.
Sadoway’s method used an iridium anode, but since iridium is expensive and supplies are limited, that’s not a viable approach for bulk steel production on Earth. But after more research and input from Allanore, the MIT team identified an inexpensive metal alloy that can replace the iridium anode in molten oxide electrolysis.
It wasn’t an easy problem to solve, Sadoway explains, because a vat of molten iron oxide, which must be kept at about 1600 degrees Celsius, “is a really challenging environment. The melt is extremely aggressive. Oxygen is quick to attack the metal.”
Many researchers had tried to use ceramics, but these are brittle and can shatter easily. “I had always eschewed that approach,” Sadoway says.
But Allanore adds, “There are only two classes of materials that can sustain these high temperatures — metals or ceramics.” Only a few metals remain solid at these high temperatures, so “that narrows the number of candidates,” he says.
Allanore, who worked in the steel industry before joining MIT, says progress has been slow both because experiments are difficult at these high temperatures, and also because the relevant expertise tends to be scattered across disciplines. “Electrochemistry is a multidisciplinary problem, involving chemical, electrical and materials engineering,” he says.
The problem was solved using an alloy that naturally forms a thin film of metallic oxide on its surface: thick enough to prevent further attack by oxygen, but thin enough for electric current to flow freely through it. The answer turned out to be an alloy of chromium and iron — constituents that are “abundant and cheap,” Sadoway says.
In addition to producing no emissions other than pure oxygen, the process lends itself to smaller-scale factories: Conventional steel plants are only economical if they can produce millions of tons of steel per year, but this new process could be viable for production of a few hundred thousand tons per year, he says.
The Latest Bing News on:
Carbon-free production of metals
- Carbon fiber, bionic design achieve peak performance in race-ready production vehicleon July 28, 2024 at 10:33 pm
Porsche worked with Action Composites to design and manufacture an innovative carbon fiber safety cage option to lightweight one of its series race vehicles.
- Insight: Western miners push for higher metals prices to ward off Chinese rivalson July 22, 2024 at 9:28 am
The European Union by 2027 will require EV manufacturers to show where they procure metals and the carbon footprint for their production. Refusal to comply would mean an EV can't be sold in the ...
- ‘Wonder material' can extract value from captured carbonon June 26, 2024 at 10:27 am
This material, part of the metal-organic frameworks (MOFs) class, has unique properties that allow it to capture carbon dioxide ... allows for scaling up the production of MOF-525 membranes ...
- AI Designs Radical Magnet Free of Rare-Earth Metals in Just 3 Monthson June 24, 2024 at 8:53 am
That pressure could be eased with a new magnet design, free from rare-earth metals, that was built with ... there's also a 70 percent reduction in material carbon emissions. In the electric ...
- The Elements of Steelon December 19, 2021 at 11:07 am
Iron is the main ingredient in various forms of iron and steel, but the various types of metals contain other elements as well. Sometimes these elements are unwanted; other times they're ...
- Metals and non-metalson December 14, 2021 at 1:13 pm
Diamond is a form of carbon. Carbon is a non-metal ... Valley to explain the discovery of the first metal - copper. BBC Teach has thousands of free, curriculum-linked resources to help deliver ...
- The future of low-carbon aluminumon June 12, 2021 at 7:31 am
Carbon emissions reduction has taken center stage for steel and aluminum producers over the past few years as countries around the world look to reduce their carbon footprints throughout the next two ...
- Carbon Steels and Alloy Steels Specificationson August 16, 2020 at 9:57 am
Carbon Steel Plain carbon steels are ferrous ... A post-annealing process is not required after hot rolling. Hot rolled metals tend to have more surface scale and require pickling and oiling. Leaded / ...
- The Types of Metals Used in the Oil & Gas Industryon August 16, 2020 at 8:32 am
Drilling for crude oil, as well as the production ... was one of the first metals to be used in strengthening steel alloys and is still used for this purpose. Low carbon steel containing 12 ...
- Iron and Steelon December 4, 2019 at 10:15 pm
It's not easy to imagine modern life without this versatile metal, is it? Although the production of metals ... ore with a substance that had a high carbon content, such as charcoal.
The Latest Google Headlines on:
Carbon-free production of metals
[google_news title=”” keyword=”carbon-free production of metals” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Steelmaking
- Glencore Raises Steelmaking Coal Guidance Despite Output Declineon July 30, 2024 at 2:13 am
Glencore said it expects to produce between 19 and 21 million tons of steelmaking coal this year despite overall output largely declining in the first half.
- Glencore Reports Production Falls in Main Metrics -- Commodity Commenton July 30, 2024 at 12:31 am
Glencore has reported production falls in its main commodities for the first half of the year but backed its guidance for most of them, except steelmaking coal, which was raised due to the acquisition ...
- TOP NEWS: Glencore interim output poor, but 2024 guidance remains sameon July 30, 2024 at 12:11 am
Glencore maintained its 2024 annual guidance. It guides for copper production of between 950,000 and 1.01 million tonnes versus 1.01 million tonnes in 2023.
- Glencore to announce decision on coal demerger at interim resultson July 30, 2024 at 12:04 am
Glencore on Tuesday left its 2024 production guidance unchanged for most metals and lifted coal to reflect the acquisition of Teck's steelmaking coal unit, saying it will announce whether it will ...
- Glencore to reveal decision on coal demerger next weekon July 30, 2024 at 12:02 am
Commodities miner and trader Glencore held annual production guidance and said it would reveal whether a planned demerger of its coal and carbon steel assets would go ahead at interim results next ...
- U.S. Steel marketing blitz puts pressure on government to OK sale to Nippon Steelon July 29, 2024 at 2:00 am
U.S. Steel is banking on public pressure to push through a $14.9 billion acquisition by Nippon Steel as lawmakers and regulators balk at putting the domestic icon in foreign hands. An advertising ...
- Steeltown Tales - an innovative and immersive virtual reality experience that brings Corby’s steelmaking history to lifeon July 26, 2024 at 8:00 am
A VR experience that offers people the opportunity to immerse themselves in the history of Corby has debuted at the Savoy cinema.
- Chart: Steelmaking is starting to go electricon July 26, 2024 at 12:30 am
The majority of new steel plants built in 2023 used lower-emissions electric arc furnaces, but the dirty industry has a way to go to clean up.
- Steelmakers Increasingly Forgoing Coal, Building Electricon July 24, 2024 at 12:00 am
The global steel industry is turning away from polluting coal-fired blast furnaces and toward cleaner electric arc furnaces, which now account for roughly half of all planned steelmaking capacity, ...
- Anglo cuts steelmaking coal outlook after Australian mine fireon July 18, 2024 at 7:12 am
Diversified major Anglo American has revised its coal production guidance for year to account for the impact of a recent fire at the Grosvenor underground mine, in Australia. Due to the incident, ...
The Latest Google Headlines on:
Steelmaking
[google_news title=”” keyword=”Steelmaking” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]