Using 3-D printing and novel semiconductors, researchers at the Department of Energy’s Oak Ridge National Laboratory have created a power inverter that could make electric vehicles lighter, more powerful and more efficient.
At the core of this development is wide bandgap material made of silicon carbide with qualities superior to standard semiconductor materials. Power inverters convert direct current into the alternating current that powers the vehicle. The Oak Ridge inverter achieves much higher power density with a significant reduction in weight and volume.
“Wide bandgap technology enables devices to perform more efficiently at a greater range of temperatures than conventional semiconductor materials,” said ORNL’s Madhu Chinthavali, who led the Power Electronics and Electric Machinery Group on this project. “This is especially useful in a power inverter, which is the heart of an electric vehicle.”
Specific advantages of wide bandgap devices include: higher inherent reliability; higher overall efficiency; higher frequency operation; higher temperature capability and tolerance; lighter weight, enabling more compact systems; and higher power density.
Additive manufacturing helped researchers explore complex geometries, increase power densities, and reduce weight and waste while building ORNL’s 30-kilowatt prototype inverter.
“With additive manufacturing, complexity is basically free, so any shape or grouping of shapes can be imagined and modeled for performance,” Chinthavali said. “We’re very excited about where we see this research headed.”
Using additive manufacturing, researchers optimized the inverter’s heat sink, allowing for better heat transfer throughout the unit. This construction technique allowed them to place lower-temperature components close to the high-temperature devices, further reducing the electrical losses and reducing the volume and mass of the package.
Another key to the success is a design that incorporates several small capacitors connected in parallel to ensure better cooling and lower cost compared to fewer, larger and more expensive “brick type” capacitors.
The research group’s first prototype, a liquid-cooled all-silicon carbide traction drive inverter, features 50 percent printed parts. Initial evaluations confirmed an efficiency of nearly 99 percent, surpassing DOE’s power electronics target and setting the stage for building an inverter using entirely additive manufacturing techniques.
The Latest on: Additive manufacturing
[google_news title=”” keyword=”Additive manufacturing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Additive manufacturing
- Manufacturing Solutions Ireland 2024: A Day of Innovation and Insighton April 26, 2024 at 12:46 pm
Manufacturing Solutions Ireland is once again set to captivate the precision engineering community with its annual event, set to take place on June 12th at a new cutting-edge location - TUS ...
- RIT/Layer Metrics awarded funds for project that supports manufacturing processeson April 26, 2024 at 7:15 am
A local university and women-owned technology company in Rochester have received funding for a joint project aimed at improving manufacturing processes.
- GE Additive rebrands as Colibrium Additive, retires Concept Laser and Arcam brandingon April 26, 2024 at 3:45 am
GE Additive has relaunched as Colibrium Additive. It was also announced that Concept Laser and Arcam EBM legacy brands will be retired.
- INDO-MIM taps 3D printing in precision manufacturingon April 25, 2024 at 6:27 pm
The precision metal parts manufacturer is using HP’s Metal Jet S100 printers to produce components using metal powder for the automotive, healthcare and other industries ...
- UltiMaker Targets Experienced Additive Manufacturers with New Factor 4on April 25, 2024 at 8:43 am
Industrial-grade 3D printer focuses on reliability, with automatic material handling and in-process monitoring.
- GE Additive rebrands as Colibrium Additive; Concept Laser & Arcam brands to be retiredon April 25, 2024 at 8:29 am
GE Additive has rebranded as Colibrium Additive, after GE split into three public companies earlier this month. Colibrium Additive will operate under the GE Aerospace umbrella.
- Xact Metal ‘breaks the mold’ to showcase metal Additive Manufacturing as viable tooling optionon April 25, 2024 at 4:35 am
Xact Metal has announced the launch of its new initiative, “Breaking the Mold: The Xact Solution to Better Tooling.” ...
- AMGTA research explores sustainability of metal additive manufacturing feedstockon April 25, 2024 at 3:11 am
The study was conducted with Syntec Associates and Divergent Technologies to determine specific energy requirements for producing metal 3D printing materials via three key processes.
- Vietnam Hybrid Additive Manufacturing Machine Market Key Segments, Share, Size, Trends, Growth, and Forecast 2024 to 2032on April 17, 2024 at 1:55 pm
The recent analysis by Report Ocean on the “Vietnam Hybrid Additive Manufacturing Machine Market” Report 2024 to 2032 revolves around various aspects of the market, including characteristics, size and ...
- In-situ alloying of NiTiNb shape memory alloys by additive manufacturingon April 16, 2024 at 1:22 pm
In order to address the challenges in fabrication NiTiNb ternary alloy structures, researchers from Shandong University (SDU) have proposed an alloy design strategy to prepare NiTiNb shape memory ...
via Bing News