By energizing precursor molecules using a tiny, high-energy supersonic jet of inert gas, researchers have dramatically accelerated the fabrication of nanometer scale structures. The rapid additive manufacturing technique also allows them to produce structures with high aspect ratios. Now, a theory developed to describe the technique could lead to new applications for additive nanomanufacturing and new nanoscale materials.
Based on focused electron beam deposition, the technique allows structures to be fabricated from gas-phase precursors at rates approaching what could be expected in the liquid phase – all without raising the temperature of substrates. That could lead to manufacturing of the nanometer-scale structures at rates that could make them practical for use in magnetic memory, high-frequency antennas, quantum communication devices, spintronics and atomic-scale resonators.
“We are controlling matter on the atomic scale to bring about new modes of additive manufacturing,” said Andrei Fedorov, a professor in the George W. Woodruff School of Mechanical Engineering at the Georgia Institute of Technology. “This new science could bring about additive manufacturing applications that might otherwise be impossible. The resulting new technology will open up new dimensions for additive manufacturing at the atomic scale.”
The work grew out of frustration with trying to create small structures using the electron beams, which can be just a few nanometers in diameter. The research was supported by the U.S. Department of Energy’s Office of Science, and was reported May 28 in the journal Physical Chemistry Chemical Physics.
“When we went to the lab to use nanofabrication with focused electron beams, which are the size of a few nanometers, we could not grow structures that were just a few nanometers. They grew to be 50 or 100 nanometers,” Fedorov explained. “And it also took a long time to produce the structures, which meant that, without improvements, we’d never be able to produce them at high volume.”
Fedorov and collaborators Matthew Henry and Songkil Kim realized the reactions producing the structures were slow, and tied to the thermodynamic state of the substrate on which they are being grown. They decided to add some energy to the process to speed things up – as much as a hundred times faster.
The result was the invention of a micro-capillary injector just a few micrometers in diameter that could introduce tiny jets of gaseous molecules into the deposition chamber to activate the precursors for the nanometer-scale structures. Partly because the jet is entering a vacuum chamber, the gas accelerates to supersonic speeds. Energy from the supersonic jet excites the precursor molecules that are adsorbed to the substrate.
“This energetic thermal state allows the electrons from the beam to much more easily break chemical bonds, and as a result, structures grow much faster,” Fedorov said. “All of this amplification, both the molecule transport and the rate of reaction, are exponential, meaning a small change can lead to a dramatic increase in outcome.”
That much has been observed experimentally, but to understand how to control the process and expand its applications, the researchers wanted to create a theory for what they were seeing. They used nano-scale thermometric techniques to measure the temperature of the adsorbed atoms – also known as adatoms – subjected to the jet, and used that information to help understand the basic physics at work.
“Once we have a model, it essentially becomes a design tool,” Fedorov said. “With this understanding and the capabilities we have demonstrated, we can expand them to other fields such as directed self-assembly, epitaxial growth and other areas. This could enable a whole host of new capabilities to use this kind of direct-write nanofabrication.”
Development of the model and understanding of the first-principles physics behind it could also allow other researchers to find new applications.
“With this, you can have almost the same order of magnitude growth rate as you’d have with liquid phase precursors, but still have access to the richness of possible precursors, the ability to manipulate alloying, and all the experience that has been developed over the years with gas phase deposition,” Fedorov said. “This technology will allow us to do things at a scale that is meaningful from a practical standpoint and cost-effective.”
The ability to rapidly produce small, three-dimensional structures could open up a range of new applications.
“If you can adapt additive direct-write techniques, this could bring a lot of unique capabilities for magnetic memory, superconducting materials, quantum devices, 3D electronic circuitry, and many more things,” he said. “These structures are currently very hard to make using conventional methods.”
Beyond using the jets to accelerate deposition of precursor materials already on the substrate, the researchers have also created hybrid jets that contain both high-energy inert gas and precursor gases, which allow not only dramatic acceleration of nanostructure growth but also precisely control the material composition during growth. In future work, the researchers plan to use these hybrid approaches to enable formation of nanostructures with phase and topology that cannot be achieved by any existing nanofabrication techniques.
Learn more: Tiny Supersonic Jet Injector Accelerates Nanoscale Additive Manufacturing
The Latest on: Additive manufacturing
[google_news title=”” keyword=”additive manufacturing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Additive manufacturing
- Manufacturing Solutions Ireland 2024: A Day of Innovation and Insighton April 26, 2024 at 12:46 pm
Manufacturing Solutions Ireland is once again set to captivate the precision engineering community with its annual event, set to take place on June 12th at a new cutting-edge location - TUS ...
- Fonon Highlights Its Zero Width Laser Cutting Solution for Flat Panel Display Manufacturingon April 26, 2024 at 12:02 pm
Fonon Corporation, a multi-market holding company, R&D center, equipment designer and manufacturer of advanced laser material processing systems for subtractive and additive manufacturing, highlights ...
- GE Additive rebrands as Colibrium Additive, retires Concept Laser and Arcam brandingon April 26, 2024 at 3:45 am
GE Additive has relaunched as Colibrium Additive. It was also announced that Concept Laser and Arcam EBM legacy brands will be retired.
- INDO-MIM taps 3D printing in precision manufacturingon April 25, 2024 at 6:27 pm
The precision metal parts manufacturer is using HP’s Metal Jet S100 printers to produce components using metal powder for the automotive, healthcare and other industries ...
- UltiMaker Targets Experienced Additive Manufacturers with New Factor 4on April 25, 2024 at 8:43 am
Industrial-grade 3D printer focuses on reliability, with automatic material handling and in-process monitoring.
- GE Additive rebrands as Colibrium Additive; Concept Laser & Arcam brands to be retiredon April 25, 2024 at 8:29 am
GE Additive has rebranded as Colibrium Additive, after GE split into three public companies earlier this month. Colibrium Additive will operate under the GE Aerospace umbrella.
- Xact Metal ‘breaks the mold’ to showcase metal Additive Manufacturing as viable tooling optionon April 25, 2024 at 4:35 am
Xact Metal has announced the launch of its new initiative, “Breaking the Mold: The Xact Solution to Better Tooling.” ...
- AMGTA research explores sustainability of metal additive manufacturing feedstockon April 25, 2024 at 3:11 am
The study was conducted with Syntec Associates and Divergent Technologies to determine specific energy requirements for producing metal 3D printing materials via three key processes.
- AFRL Uses Additive Manufacturing to Make Single-Block Rocket-Engine Thrust Chamberon April 22, 2024 at 7:00 am
The AFRL has announced that it has turned to laser powder DED additive manufacturing to create a rocket-engine thrust chamber.
- Vietnam Hybrid Additive Manufacturing Machine Market Key Segments, Share, Size, Trends, Growth, and Forecast 2024 to 2032on April 17, 2024 at 1:55 pm
The recent analysis by Report Ocean on the “Vietnam Hybrid Additive Manufacturing Machine Market” Report 2024 to 2032 revolves around various aspects of the market, including characteristics, size and ...
via Bing News