A 10-fold increase in the ability to harvest mechanical and thermal energy over standard piezoelectric composites may be possible using a piezoelectric ceramic foam supported by a flexible polymer support, according to Penn State researchers.
In the search for ways to harvest small amounts of energy to run mobile electronic devices or sensors for health monitoring, researchers typically add hard ceramic nanoparticles or nanowires to a soft, flexible polymer support. The polymer provides the flexibility, while the piezo nanoparticles convert the mechanical energy into electrical voltage. But these materials are relatively inefficient, because upon mechanical loading the mechanical energy is largely absorbed by the bulk of the polymer, with a very small fraction transferred to the piezo nanoparticles. While adding more ceramic would increase the energy efficiency, it comes with the tradeoff of less flexibility.
“The hard ceramics in the soft polymer is like stones in water,” said Qing Wang, professor of materials science and engineering, Penn State. “You can slap the surface of the water, but little force is transferred to the stones. We call that strain-transfer capability.”
Almost three decades ago, the late Penn State materials scientist Bob Newnham came up with the concept that the connectivity of the piezo filler determined the efficiency of the piezoelectric effect. A three-dimensional material would be more efficient than what he classified as zero-dimensional nanoparticles, one-dimensional nanowires or two-dimensional films, because the mechanical energy would be transported directly through the three-dimensional material instead of dissipating into the polymer matrix.
“Bob Newnham was a legend in the field of piezoelectrics,” said Wang. “so everybody in the ceramic community knew of his approach, but how to achieve that 3-D structure with a well-defined microstructure remained a mystery.”
The secret ingredient to solve the mystery turned out to be a cheap polyurethane foam dusting sheet that can be purchased at any home improvement store. The small uniform protrusions on the sheet act as a template for forming the microstructure of the piezoelectric ceramic. The researchers applied the ceramic to the polyurethane sheet in the form of suspended nanoparticles in solution. When the template and solution are heated to a high enough temperature, the sheet burns out and the solution crystalizes into a solid 3-D microform foam with uniform holes. They then fill the holes in the ceramic foam with polymer.
“We see that this 3-D composite has a much higher energy output under different modes,” said Wang. “We can stretch it, bend it, press it. And at the same time, it can be used as a pyroelectric energy harvester if there is a temperature gradient of at least a few degrees.”
Sulin Zhang, professor of engineering science and mechanics, Penn State is the other corresponding author on the paper that appears in Energy and Environmental Science. Zhang and his students were responsible for extensive computational work simulating the piezoelectric performance of the 3-D composite.
“We were able to show theoretically that the piezoelectric performance of nanoparticle/nanowire composites is critically limited by the large disparity in stiffness of the polymer matrix and piezoceramics, but the 3-D composite foam is not limited by stiffness,” said Zhang. “This is the fundamental difference between these composite materials, which speaks to the innovation of this new 3-D composite. Our extensive simulations further demonstrate this idea.”
Currently, Wang and his collaborators are working with lead-free and more environmentally friendly alternatives to the current lead-zirconium-titanate ceramic.
“This is a very general method,” said Wang. “This is to demonstrate the concept, based on Bob Newnham’s work. It is good to continue the work of a Penn State legend and to advance this field.”
Learn more: Flexible, highly efficient multimodal energy harvesting
The Latest on: Energy harvesting
[google_news title=”” keyword=”energy harvesting” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Energy harvesting
- Engineers develop innovative battery technology that could change the future of remote devices: 'An integrated device that could harvest ambient thermal energy'on April 27, 2024 at 3:30 am
With simple increases and decreases in temperature, the new battery can generate enough charge for practical applications in many industries. Engineers develop innovative battery technology that could ...
- Imperial Academic Secures €2.4m European Funding to Enhance Solar Harvesting Technologyon April 26, 2024 at 4:40 pm
Professor Jenny Nelson has won a prestigious European Research Council grant to learn lessons from plants and apply them to solar technologies.She will use the grant to unpick how plants convert ...
- What’s that?…A fuel cell that harvests energy from…dirt?on April 26, 2024 at 7:10 am
A soil microbial fuel cell where microbes in dirt could power applications which are literally “in the field”.
- Saudi Arabia Energy Harvesting System Market Focus Group Alchemy Transforming Conversations into Strategic Goldon April 25, 2024 at 6:22 am
Request To Download Free Sample of This Strategic Report @ https://reportocean.com/industry-verticals/sample-request?report_id=SA1478 The report covers market ...
- This salt battery harvests osmotic energy where the river meets the seaon April 24, 2024 at 10:55 am
Estuaries -- where freshwater rivers meet the salty sea -- are great locations for birdwatching and kayaking. In these areas, waters containing different salt concentrations mix and may be sources of ...
- Revolutionizing Renewable Energy: Innovative Salt Battery Efficiently Harvests Osmotic Poweron April 24, 2024 at 5:00 am
A new semipermeable membrane doubles the osmotic energy output in estuaries, showing potential for sustainable power generation. Estuaries — where freshwater rivers meet the salty sea — are great ...
- Silicon Labs unveils wireless SoCs for energy harvestingon April 23, 2024 at 7:40 am
Silicon Labs introduces its first and most energy-efficient wireless SoCs for developing energy-harvesting devices.
- Silicon Labs’ latest wireless SoCs come with energy harvesting-ready capabilitieson April 23, 2024 at 2:48 am
Silicon Labs has announced the launch of the xG22E family of Wireless SoCs, the company’s first-ever family of devices that have been designed to operate within the ultra-low power envelope required ...
- Silicon Labs Streamlines Energy Harvesting Product Development For Battery-Free Ioton April 22, 2024 at 11:25 am
Hyderabad, Telangana, India Silicon Labs (NASDAQ: SLAB), a leader in secure, intelligent wireless technology for a more connected world, to ...
via Bing News