A ceramic-based mechanical pump able to operate at record temperatures of more than 1,400 degrees Celsius (1,673 Kelvin) can transfer high temperature liquids such as molten tin, enabling a new generation of energy conversion and storage systems.
The new pump could facilitate high efficiency, low-cost thermal storage, providing a new way to store renewable energy generated by wind and solar power, and facilitate an improved process for generating hydrogen directly from fuels such as methane – without producing carbon dioxide. Use of ceramic components, normally considered too brittle for mechanical systems, was made possible by precision machining – and seals made from another high-temperature material: graphite.
The research was supported by the Advanced Research Projects Agency – Energy (ARPA-E) and reported in the October 12 issue of the journal Nature. The pump was developed by researchers from the Georgia Institute of Technology with collaborators from Purdue University and Stanford University.
“Until now, we’ve had a ceiling for the highest temperatures at which we could move heat and store it, so this demonstration really enables energy advances, especially in renewables,” said Asegun Henry, an assistant professor in Georgia Tech’s Woodruff School of Mechanical Engineering. “The hotter we can operate, the more efficiently we can store and utilize thermal energy. This work will provide a step change in the infrastructure because now we can use some of the highest temperature materials to transfer heat. These materials are also the hardest materials on Earth.”
Thermal energy, fundamental to power generation and many industrial processes, is most valuable at high temperatures because entropy – which makes thermal energy unavailable for conversion – declines at higher temperatures. Liquid metals such as molten tin and molten silicon could be useful in thermal storage and transfer, but until now, engineers didn’t have pumps and pipes that could withstand such extreme temperatures.
“The hotter you can operate, the more you can convert thermal energy to mechanical energy or electrical energy,” Henry explained. “But when containment materials like metals get hot, they become soft and that limits the whole infrastructure.”
Ceramic materials can withstand the heat, but they are brittle – and many researchers felt they couldn’t be used in mechanical applications like pumps. But Henry and graduate student Caleb Amy – the paper’s first author – decided to challenge that assumption by trying to make a ceramic pump. “We weren’t certain that it wouldn’t work, and for the first four times, it didn’t,” Henry said.
The researchers used an external gear pump, which uses rotating gear teeth to suck in the liquid tin and push it out of an outlet. That technology differs from centrifugal and other pump technologies, but Henry chose it for its simplicity and ability to operate at relatively low speeds. The gears were custom-manufactured by a commercial supplier and modified in Henry’s lab in the Carbon Neutral Energy Solutions(CNES) Laboratory at Georgia Tech.
“What is new in the past few decades is our ability to fabricate different ceramic materials into large chunks of material that can be machined,” Henry explained. “The material is still brittle and you have to be careful with the engineering, but we’ve now shown that it can work.”
Addressing another challenge, the researchers used another high-temperature material – graphite – to form the seals in the pump, piping and joints. Seals are normally made from flexible polymers, but they cannot withstand high temperatures. Henry and Amy used the special properties of graphite – flexibility and strength – to make the seals. The pump operates in a nitrogen environment to prevent oxidation at the extreme temperatures.
The pump operated for 72 hours continuously at a few hundred revolutions per minute at an average temperature of 1,473 Kelvin – with brief operation up to 1,773 Kelvin in other experimental runs. Because the researchers used a relatively soft ceramic known as Shapal for ease of machining, the pump sustained wear. But Henry says other ceramics with greater hardness will overcome that issue, and the team is already working on a new pump made with silicon carbide.
Among the most interesting applications for the high-temperature pump would be low-cost grid storage for surplus energy produced by renewables – one of the greatest challenges to the penetration of renewables on the grid. Electricity produced by solar or wind sources could be used to heat molten silicon, creating thermal storage that could be used when needed to produce electricity.
“It appears likely that storing energy in the form of heat could be cheaper than any other form of energy storage that exists,” Henry said. “This would allow us to create a new type of battery. You would put electricity in when you have an excess, and get electricity back out when you need it.”
The Georgia Tech researchers are also looking at their molten metal pump as part of a system to produce hydrogen from methane without generating carbon dioxide. Because liquid tin doesn’t react with hydrocarbons, bubbling methane into liquid tin would crack the molecule to produce hydrogen and solid carbon – without generating carbon dioxide, a greenhouse gas.
The pump could also be used to allow higher temperature operation in concentrated solar power applications, where molten salts are now used. The combination of liquid tin and ceramics would have an advantage in being able to operate at higher temperatures without corrosion, enabling higher efficiency and lower cost.
The ceramic pump uses gears just 36 millimeters in diameter, but Henry says scaling it up for industrial processing wouldn’t require dramatically larger components. For example, by increasing the pump dimensions by only four or five times and operating the pump near its maximum rated speed, the total heat that could be transferred would increase by a factor of a thousand, from 10 kW to 100 MW, which would be consistent with utility-scale power plants.
For storage, molten silicon – with still higher temperatures – may be more useful because of its lower cost. The pump could operate at much higher temperatures than those demonstrated so far, even past 2,000 degrees Celsius, Henry said.
Learn more: Ceramic Pump Moves Molten Metal at a Record 1,400 Degrees Celsius
The Latest on: Thermal storage
[google_news title=”” keyword=”thermal storage” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- nVent thermal business carveout; Neuberger Berman joins Audax to recap FDH Aero; EnCap closes second energy transition LPon May 9, 2024 at 6:52 am
And we’ll wind up today with two energy transition bits: Mercom Capital Group’s Q1 2024 solar market update, which highlights M&A activity across the US solar market, and EnCap Investments’ closing of ...
- IPCL and E2S Power to develop thermal energy storage systemon May 9, 2024 at 4:09 am
Thermal energy storage system technology developed by E2S Power will play a key role in India's pursuit of net zero emissions.
- Powering homes with PVT energy, Stirling engines, battery storageon May 9, 2024 at 2:52 am
UK scientists have proposed a way to combine photovoltaic-thermal energy with Stirling engines and battery storage in residential buildings. Despite the high upfront costs, they said the ...
- IPCL and ES2 collaborate for pilot thermal energy storage projecton May 8, 2024 at 9:57 pm
The two companies launched a thermal storage unit with a 250 KWh capacity. Indian Power Corporation Limited (IPCL) and ES2 Power signed an agreement to launch the 250-kilowatt-hour pilot thermal ...
- IPCL, E2S to develop Thermal Energy Storage System for efficient storage, transmissionon May 8, 2024 at 4:54 am
The 250Kwh TESS, developed by E2S, has been synchronized with the IPCL system and will help the company achieve its goal of integrating 80 per cent renewable energy into the distribution system by the ...
- Thermal Energy Storage Innovation: IPCL and E2S Collaborate on Efficient Storage and Transmissionon May 8, 2024 at 4:10 am
India Power and E2S collaborate to establish Thermal Energy Storage System (TESS) for energy efficiency. The 250Kwh TESS, integrated with IPCL, supports the company's goal of integrating 80% renewable ...
- KULR Technology Successfully Completes 200 Amp-Hour Battery Fractional Thermal Runaway Calorimetry Test for EV Customeron May 7, 2024 at 5:59 am
This technology was eventually licensed by KULR Technology Corporation on an exclusive basis in 2023. With this technique, KULR can characterize total energy yield, fractional energy yield, and mass ...
- Thermal Energy Storage Market to Grow at CAGR of 15% through 2033 - Advancements in TES Technology to Bolster Growthon May 6, 2024 at 2:00 am
Newark, May 06, 2024 (GLOBE NEWSWIRE) -- The Brainy Insights estimates that the USD 5 billion in 2023 global thermal energy storage market will reach USD 20.22 billion in 2033. The energy that a ...
- MIT Spinout 247Solar Constructs High-Temperature Concentrated Solar Power Systems with Overnight Thermal Energy Storageon May 3, 2024 at 6:19 pm
As remarkable as the rise of solar and wind farms has been over the last 20 years, achieving complete decarbonization is going to require a host of complementary technologies. That’s because ...
- Energy Storage: A New Asset Class Buyers Of Power Should Consider Investing Inon May 1, 2024 at 8:00 am
Investing in energy storage doesn’t just provide a pathway for reducing carbon emissions; it’s also a pathway for potential savings on electricity and energy costs.
via Google News and Bing News