NASA and Aerojet Rocketdyne recently finished testing a rocket engine injector made through additive manufacturing, or 3-D printing.
This space technology demonstration may lead to more efficient manufacturing of rocket engines, saving American companies time and money. The tests were conducted at NASA’s Glenn Research Center in Cleveland.
The series of tests demonstrated the ability to design, manufacture and test a critical rocket engine component using selective laser melting manufacturing technology — a method that employs high-powered laser beams to melt and fuse fine metallic powders into three dimensional structures.
“NASA recognizes that on Earth and potentially in space, additive manufacturing can be game-changing for new mission opportunities, significantly reducing production time and cost by ‘printing’ tools, engine parts or even entire spacecraft,” said Michael Gazarik, NASA’s associate administrator for space technology in Washington. “3-D manufacturing offers opportunities to optimize the fit, form and delivery systems of materials that will enable our space missions while directly benefiting American businesses here on Earth.”
This type of injector manufactured with traditional processes would take more than a year to make, but with these new processes it can be produced in less than four months, with a 70 percent reduction in cost.
The Latest Bing News on:
Rocket engines
- SpaceX Falcon 9 rocket flashes fiery multicolored exhaust across nighttime sky Thursdayon May 9, 2024 at 5:40 am
Multicolored flames trailing from a SpaceX Falcon 9 rocket treated Brevard County spectators to a spectacular show Thursday night, as another Starlink mission soared along a southeasterly trajectory. ...
- SpaceX fires up Starship rocket for upcoming 5th test flight (photos, video)on May 9, 2024 at 5:00 am
SpaceX conducted a "static fire" with a Starship upper stage today (May 8) at its Starbase site in South Texas, briefly igniting all six of the 165-foot-tall (50 meters) vehicle's Raptor engines while ...
- North Korea tested rocket engine last month: Reporton May 8, 2024 at 12:23 am
North Korea late last month carried out a test of a liquid propellant rocket engine, a US think tank claimed in its latest report. Pyongyang conducted an unannounced test during the fourth week of ...
- North Korea conducted rocket engine test in April, analysis showson May 7, 2024 at 6:19 pm
North Korea conducted a test of a large liquid-fueled rocket engine in late April, an analysis of imagery by a U.S. think tank has shown, as Pyongyang appears to be gearing up for another spy ...
- Highlights Of Dawn Aerospace's Suborbital Space Plane's First Rocket Powered Flighton May 7, 2024 at 5:00 pm
Watch the Dawn Aerospace's Mk-II Aurora Spaceplane light up it rocket engine test flight. Credit: Dawn Aerospace 12 Things Your Partner Should Never Say to You—or Vice Versa Cheese Recall Map Shows ...
- Rocket Lab pushes back Neutron debut to 2025on May 7, 2024 at 9:20 am
As Rocket Lab prepares to begin tests of the first Archimedes engine, it says that Neutron won’t be ready for its first flight before the middle of 2025.
- Rocket Lab Slips Neutron Rocket Due To Archimedes Engineon May 7, 2024 at 2:43 am
The first launch of Rocket Lab’s proposed medium-lift Neutron is slipping to no earlier than mid-2025 due to development of its Archimedes engine, executives said May 6. The slip of six months or more ...
- Rocket Lab Completes Archimedes Engine Build, Begins Engine Test Campaignon May 6, 2024 at 1:37 pm
Rocket Lab USA, Inc. (Nasdaq: RKLB) (“Rocket Lab” or “the Company”), a global leader in launch services and space systems, today announced it has completed the first full assembly of its Archimedes ...
- NASA Fired Up Artemis Moon Rocket Engine For 550 Second Teston May 5, 2024 at 5:00 pm
The Space Launch System rocket's RS-25 engine was fired up for the “final round of certification testing ahead of production of an updated set of the engines," according to NASA. The test occurred at ...
- Building A Rocket Engine From Scratchon May 5, 2024 at 10:00 am
There is a reason building a rocket engine is harder than most things you want to build. If you are building, say, a car, your goal is to not have it explode. If you are building a bomb, you want ...
The Latest Google Headlines on:
Rocket engines
[google_news title=”” keyword=”rocket engines” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
3-D printing space equipment
- 3 3D Printing Stocks With the Potential to Make You an Overnight Millionaireon April 30, 2024 at 4:07 am
Today, major players in the early days of 3D printing are not as far along as many analysts had hoped. However, companies that strategically position themselves within the 3-D printing industry as ...
- 3 3D Printing Stocks With the Potential to Make You an Overnight Millionaireon April 30, 2024 at 4:07 am
Not too long ago, analysts and early adopters touted the technology of 3D printing as the future of manufacturing. Then came market corrections and concerns surrounding the feasibility of long-term ...
- Best 3D Printing Filament in 2024on April 27, 2024 at 1:52 pm
and traditional paper printers Credentials 6 years working professionally in the 3D printing space / 4 years testing consumer electronics for large websites. CNET’s expert staff reviews and ...
- INTAMSYS Becomes 3D Printing Equipment Supplier for the WORLDSKILLS LYON 2024 COMPETITIONon April 24, 2024 at 4:13 am
Ostfildern [Germany], April 24: INTAMSYS has officially signed a sponsorship contract with WorldSkills Lyon 2024, becoming the supplier of FFF 3D printing equipment for the Mechanical Engineering ...
- Using 3D Printing to help us see into spaceon April 17, 2024 at 5:00 pm
As such, additive manufacturing (AM; 3D-printing) is seen as a highly desirable ... and secondary mirror with the Thai Space Consortium (TSC). Further experiments have also used Royce equipment to ...
- Mad scientist Bryson DeChambeau is leading the Masters with irons made by a 3D printeron April 12, 2024 at 9:17 am
A set of irons that are made by 3D printing and weren’t approved by ... and they have just got a different curvature on the face than other equipment,” DeChambeau said Friday after his round.
- Why the Pentagon’s use of 3D printing is ‘not quite there yet’on April 9, 2024 at 5:00 pm
On the floor of Sea-Air-Space, the U.S. Navy’s largest annual ... who is a program manager for additive manufacturing — another term for 3D printing — at Naval Sea Systems Command.
- Best 3D-Printing Accessories of 2024on April 6, 2024 at 3:07 am
traditional paper printers Credentials 6 years working professionally in the 3D printing space / 4 years testing consumer electronics for large websites. CNET’s expert staff reviews and rates ...
- 3D Printerson February 7, 2024 at 1:01 pm
Controversial New York Senate Bill Will Require 3D Printer Shoppers To Go Through A Criminal Background Check EXCLUSIVE: Desktop Metal CEO Talks Triple Digit Growth In 3D Printing Space Using 3D P ...
- Hackaday Podcast 217: The Unintentional Space And 3D Printing Episodeon May 4, 2023 at 5:00 pm
Hackaday Editors Elliot Williams and Tom Nardi definitely didn’t plan on devoting most of this episode to 3D printing and space stories, but let’s be honest, it was bound to happen sooner or ...
The Latest Google Headlines on:
3-D printing space equipment
[google_news title=”” keyword=”3-D printing space equipment” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]