By the end of September, NASA aerospace engineer Jason Budinoff is expected to complete the first imaging telescopes ever assembled almost exclusively from 3-D-manufactured components.
“As far as I know, we are the first to attempt to build an entire instrument with 3-D printing,” said Budinoff, who works at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
Under his multi-pronged project, funded by Goddard’s Internal Research and Development (IRAD) program, Budinoff is building a fully functional, 50-millimeter (2-inch) camera whose outer tube, baffles and optical mounts are all printed as a single structure. The instrument is appropriately sized for a CubeSat, a tiny satellite comprised of individual units each about four inches on a side. The instrument will be equipped with conventionally fabricated mirrors and glass lenses and will undergo vibration and thermal-vacuum testing next year.
Budinoff also is assembling a 350-millimeter (14-inch) dual-channel telescope whose size is more representative of a typical space telescope.
Pathfinder Project
Budinoff is developing both to show that telescope and instrument structures can benefit from advances in 3-D, or additive, manufacturing. With this technique, a computer-controlled laser melts and fuses metal powder in precise locations as indicated by a 3-D computer-aided design (CAD) model. Because components are built layer by layer, it is possible to design internal features and passages that could not be cast or machined using more traditional manufacturing approaches.
The goal isn’t to fly them, at least not yet. “This is a pathfinder,” Budinoff said. “When we build telescopes for science instruments, it usually involves hundreds of pieces. These components are complex and very expensive to build. But with 3-D printing, we can reduce the overall number of parts and make them with nearly arbitrary geometries. We’re not limited by traditional mill- and lathe-fabrication operations.”
The Latest on: 3-D-printed space camera telescope
[google_news title=”” keyword=”3-D-printed space camera telescope” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3-D-printed space camera telescope
- Using 3D Printing to help us see into spaceon April 17, 2024 at 5:00 pm
Nanosatellites offer a way to greatly increase access to space-based imaging. Whether these telescopes are looking to space for ... As such, additive manufacturing (AM; 3D-printing) is seen as a ...
- Top Tech Deals: GoPro HERO 12 Black, MacBook Air, Blink Cameras, and Moreon April 10, 2024 at 8:45 am
With GoPro's Creator Edition, you'll get the Volta battery grip, tripod, and remote, not to mention the media microphone mod. Plus, it comes with a carry case, an LED light mod, and the Enduro battery ...
- Welch: Eclipse protocol — Don’t get caught without your glasseson April 6, 2024 at 5:30 pm
If I were a politician, I’d get my name and a clever slogan printed on some eclipse glasses ... some of the pictures she’d taken with her 3-D camera on our movie screen instead of through ...
- Clear skies for the eclipse — but protect your eyeson April 6, 2024 at 5:00 pm
Ahead of the eclipse, U.S. Senator Peter Welch (D-Vt.), a member of the Senate Committee on Commerce, Science and Transportation, shared eye safety tips from the National Aeronautics and Space ...
- Here's where to find safe eye protection for Monday's solar eclipseon April 4, 2024 at 6:33 am
Cameras, binoculars and telescopes must be outfitted with special ... appear to be products being promoted with misleading claims, printed with information copied from other manufacturers ...
- Great American Eclipseon April 2, 2024 at 4:59 pm
Explore the spectacular cosmic phenomenon of a total solar eclipse. In April 2024, the Moon’s shadow is sweeping from Texas to Maine, as the U.S. witnesses its last total eclipse until 2044, and ...
- The tricky quest to create an artificial solar eclipseon March 22, 2024 at 5:14 am
Their occulting disk, made on a 3D printer ... Space Agency mission called Proba-3, in which two spacecraft will fly in formation, separated by 470 feet. Instead of carrying a telescope with ...
- Explore The Cosmos With This DIY Digital Telescopeon March 5, 2021 at 11:06 pm
While building this 3D printed automated ... in the commercial space. Rather than having to lug around a separate telescope, tripod, motorized tracker, and camera, you just need this relatively ...
- The Best 3D Printers for 2024on February 8, 2020 at 5:16 pm
A built-in camera ... speed and print quality put in good stead for rapid prototyping or short-run manufacturing. The Creality Ender-3 S1 Pro provides good value in an open-frame 3D printer ...
- Fairfield's Rebirth in 3-Don February 8, 2019 at 2:11 pm
Now, thanks to an innovative 3-D printing project ... To make the model, a camera mounted on a drone takes thousands of images of the excavation area. As each layer of soil is removed, the ...
via Bing News