Chemical flasks and inconvenient chemostats for cultivation of bacteria are likely soon to be discarded.
Researchers from the Institute of Physical Chemistry of the Polish Academy of Sciences in Warsaw were first to construct a microfluidic system allowing for merging, transporting and splitting of microdroplets. Since now, hundreds of different bacteria cultures can be maintained simultaneously in a single system, which could speed up the research on resistance of bacteria to antibiotics.
We could safely say that without chemical flask there would be no chemistry at all. It has been since years, however, the chemists’ dream to be able to downscale to the microscale the operations that are easily performed with large quantities of chemicals inside flasks, including refilling, mixing, pouring out. The first microfluidic system capable of performing all the typical operations with chemicals inside miniscule droplets has been presented just now. The device, fabricated by a group of researchers from the Institute of Physical Chemistry of the Polish Academy of Sciences (IPC PAS), headed by Dr Piotr Garstecki, allow for performing strictly controlled chemical reactions and cultivation of bacterial colonies inside multiple microdroplets at a time.
The research paper reporting a system for cultivation of bacteria have just been published in one of the most prestigious chemical journals, “Angewandte Chemie International Edition”.
Microfluidic systems are fabricated from polymer plates with sizes resembling a credit card or less. Inside the systems, a carrier fluid (mostly oil) carrying microdroplets containing chemicals flows laminarly through tiny channels of diameters in the range of tenths or hundredths of a milimeter. Using a single microfluidic system, up to a few dozen of thousands of different chemical reactions can be carried out during a day.
Existing microfluidic systems featured a serious drawback: they did not allow to carry out and control long-lasting processes requiring to perform thousands of operations on each of hundreds of microdroplets. Due to this limitation, e.g., long-lasting cultivations of microorganisms were not possible. To provide bacteria with normal growth conditions, they must be supplied with nutrients, and metabolites must be removed from their environment on a regular basis.
“Our microfluidic system allows to add to and to collect from each of hundreds of droplets circulating within the device a precisely measured amount of fluid”, says Dr Garstecki.
The microsystem from the IPC PAS is composed of two branches of microchannels forming densely arranged zigzags. Up to a few hundred droplets, at a distance of about one centimeter from each other, can circulate in the microchannels. The microdroplets move in a pendular movement from one branch to the other.
“On the way between the branches, the droplets flow through a system of channels, where we can collect a bit of fluid from each droplet – or add a bit of fluid, depending on what is needed. As the only ones, we can do this no matter what is the direction the droplet is moving in, by appropriately changing the flows in intersections of the microchannels”, explains Dr S?awomir Jakie?a (IPC PAS).
Moreover, each droplet circulating within the microfluidic system has its own unique identifier, assigned by the optoelectronic system. It allows the researchers to monitor at any time what operations have been carried out on each microdroplet.
The possibility of cultivation of bacteria in single microdroplets for a time counted in tens and hundreds of hours, requiring multiple nutrient medium replacement, is of paramount practical importance for medicine. It is also related to occurrence of a growing number of drug-resistant strains that begin to appear even outside hospitals. Meanwhile, the search for new, effective antibacterial drugs requires to carry out up to tens of thousands of experiments with antibiotics administered in various concentrations. When performed with traditional methods, these experiments last for a very long time and are extremely expensive.
“The size of typical chemostats for cultivation of and studies on bacteria cultures resembles that of bioreactors of a few liter volume, so that they are large and inconvenient. In addition, they require a quite a number of connections, mixers, and supplies. Removing biofilms forming on the walls is troublesome. All these problems disappear if we cultivate bacteria in our microdroplets”, says Tomasz Kami?ski, a PhD student at the IPC PAS.
A single droplet can include up to over one hundred thousand bacteria. The crucial fact here is that the bacteria are not able to move between the droplets. This is impossible because of the laws of physics (the bacteria would have to cross the surface membrane of a microdroplet) and chemistry (carrier liquid used to transport microdroplets is not an environment favourable for the life of bacteria).
“We can transform each our microdroplet in a real bioreactor. Therefore, in a single small plate we can have up to several hundreds of bioreactors, with different, controlled concentration of an antibiotic, a different antibiotic, or even different bacterial species in each bioreactor”, stresses Dr Garstecki.
The Latest Bing News on:
Microfluidics
- New fluidic system advances development of artificial blood vessels and biomedicine applicationson May 9, 2024 at 7:05 am
Nature consistently inspires engineering applications. Recently, a group of researchers from the Faculty of Engineering at the University of Hong Kong (HKU) drew new inspiration from the vascular ...
- Shaping up how red blood cell deformability is assessed—researchers develop new approachon May 8, 2024 at 1:05 pm
Red blood cells (RBCs) transport oxygen throughout the body and are able to pass through a complex of narrow capillaries due to their ability to deform. "The deformability of RBCs is an important ...
- ConScience sets up new subsidiary in Denmarkon May 7, 2024 at 6:29 am
Sweden-based nanotechnology research company ConScience AB has broadened its presence in Denmark by launching a new subsidiary, ConScience ApS. The new division will run operations at the DTU Nanolab ...
- LV1 Low Volume Microfluidic System from Microfluidicson May 3, 2024 at 5:01 pm
Responding to customer demand, Microfluidics has launched the LV1 low volume benchtop machine, which brings high shear Microfluidizer processing capabilities to samples as small as 1 ml. Sample ...
- Microfluidics Market Predicted Growth: USD 102.9 Billion by 2033, Growing at 12.3% CAGRon April 26, 2024 at 12:30 am
According to a recent report by Market.us, the Global Microfluidics Market size is expected to be worth around USD 102.9 Billion by 2033 from USD 32.3 Billion in 2023, growing at a CAGR of 12.3% ...
- Microfluidics Market CAGR of 22.9%, In the Participant’s Shoes A Glimpse into Effective Focus Group Dynamicson April 25, 2024 at 9:01 pm
Request To Download Free Sample of This Strategic Report @- Microfluidics Market is valued approximately USD 12.8 billion in 2019 and is anticipated to grow with a healthy growth rate of more than 22 ...
- Global Microfluidics Market Size To Worth USD 65.90 Billion By 2033 | CAGR Of 7.36%on April 23, 2024 at 1:00 am
New York, United States, April 23, 2024 (GLOBE NEWSWIRE) -- The Global Microfluidics Market Size is to Grow from USD 32.40 Billion in 2023 to USD 65.90 Billion by 2033, at a Compound Annual Growth ...
- M-110Y High Pressure Pneumatic Microfluidizer from Microfluidicson March 31, 2024 at 5:00 pm
The M-110Y Microfluidizer processor is a lab machine that provides the highest shear rates of any available mixer or homogenizer on the market today, maximizing the energy-per-unit fluid volume to ...
- Mastering the flow in tiny spaces – an overview of microfluidicson February 19, 2023 at 8:44 am
Microfluidics is an interdisciplinary field that combines principles from physics, chemistry, and engineering to create devices that can process and analyze minuscule volumes of liquids. Often, ...
- Microfluidics: in search of a killer applicationon April 10, 2022 at 8:03 am
But what the technology stakeholders really want is an application that will trigger widespread adoption of microfluidics by biologists. Nathan Blow reports. The field of microfluidics is now at a ...
The Latest Google Headlines on:
Microfluidics
[google_news title=”” keyword=”Microfluidics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Microfluidic system
- New fluidic system advances development of artificial blood vessels and biomedicine applicationson May 9, 2024 at 7:05 am
Nature consistently inspires engineering applications. Recently, a group of researchers from the Faculty of Engineering at the University of Hong Kong (HKU) drew new inspiration from the vascular ...
- LV1 Low Volume Microfluidic System from Microfluidicson May 3, 2024 at 5:01 pm
Responding to customer demand, Microfluidics has launched the LV1 low volume benchtop machine, which brings high shear Microfluidizer processing capabilities to samples as small as 1 ml. Sample ...
- RAB Microfluidics secures contract with global energy gianton April 30, 2024 at 12:04 am
RAB Microfluidics has secured a £750,000 contract with a global energy giant to develop an autonomous oil monitoring system for two-stroke marine vessel engines, based on its patented ‘lab-on-a-chip’ ...
- RAB Microfluidics Secures Contract With Global Energy Giant to Develop Autonomous Oil Monitoring System for Shipping Vesselson April 29, 2024 at 10:05 pm
RAB Microfluidics has secured a £750,000 contract with a global energy giant to develop an autonomous oil monitoring system for 2-stroke marine vessel engines, based on its patented ‘lab-on-a ...
- 3D microelectrode C4D microfluidic chip helps soil nutrient analysison April 27, 2024 at 5:00 pm
the team developed a C 4 D microfluidic chip with integrated 3D microelectrodes, including a cross-over electrophoretic channel and a 3D channel, via the Micro-Electro-Mechanical System process.
- CT-2000 Live Cell Imaging System from Nanopointon April 14, 2024 at 5:00 pm
Nanopoint's cellTRAY® Imaging System Model CT-2000 offers the most advanced, on-microscope incubator and integrated microfluidics system available for life science research. The system allows ...
- Viral RNA-Based Diagnostics: Nanopore System May Outperform PCRon April 8, 2024 at 5:00 pm
“We built up a simple lab-on-a-chip system that can perform testing at a miniature level with the help of microfluidics, silicon chips, and nanopore detection technologies,” said Mohammad ...
- New diagnostic tool achieves accuracy of PCR tests with faster and simpler nanopore systemon April 8, 2024 at 12:04 pm
“We built up a simple lab-on-a-chip system that can perform testing at a miniature level with the help of microfluidics, silicon chips, and nanopore detection technologies,” said Mohammad ...
- Improving plant health diagnostics: The dawn of microfluidic devices for rapid miRNA detectionon March 21, 2024 at 2:22 pm
To tackle the issue of identifying microRNAs (miRNAs) in plants, a novel microfluidic device system has been developed. The system focuses on detecting miR399, which is a biomarker for phosphorus ...
The Latest Google Headlines on:
Microfluidic system
[google_news title=”” keyword=”microfluidic system” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]