Forget the laboratory, substances that can solve environmental problems by capturing carbon dioxide, decontaminating water and cleaning up pollutants can be easily created in a kitchen, a UNSW Sydney study shows.
In a paper published today in Nature Communications, UNSW chemical engineers shone a light on the mysterious world of liquid metals and their role as catalysts to speed up chemical processes using low amounts of energy.
Professor Kourosh Kalantar-Zadeh of UNSW’s School of Chemical Engineering says that “anyone with a shaker and a cooktop at home in their kitchen can make catalysts that can be used for CO2 conversion, cleaning water and other pollutants.
“They can do this by using a combination of liquid metals like gallium, indium, bismuth and tin in alloys that can be melted under 300ºC on a cooktop or in an oven.”
Professor Kalantar-Zadeh and colleague Dr Jianbo Tang showed that by heating an alloy of bismuth and tin, the metal melted at a point much lower than if you were to heat each metal individually. Substances that behave like this are said to be eutectic.
“Eutectic alloys are the mixes of metals that produce the lowest melting point at a particular combination,” says Dr Tang.
“For instance, if we combine bismuth at 57% and tin at 43% they melt at 139ºC. But by themselves, both bismuth and tin have melting points above 200ºC.”
Professor Kalantar-Zadeh says the specific mix ratio of eutectic substances produces the maximum natural chaos at the nano-level, which in turn brings the melting point down. The process can also work the other way. Eutectic metal substances already in liquid form can solidify at a single temperature below the usual freezing point of each metal.
“This maximum chaos helps, when we solidify the liquid metals, to naturally produce so many defects in the material that the ‘catalytic’ activity is significantly enhanced,” Professor Kalantar-Zadeh says.
How to make a liquid metal catalyst
Ingredients: a eutectic alloy, water
- Take your eutectic metal alloy and place in a saucepan on a high flame.
- When the metal melts, carefully pour it into a bottle of water and tighten the cap.
- Shake the liquid metal and water together to produce droplets of liquid metal in water. It will be similar to shaking oil and vinegar to produce droplets of oil in the vinegar.
- Let the droplets solidify into a powder. This can now be used as a catalyst for the electrochemical conversion of CO2.
Liquid metals and the environment
Liquid metal alloys can be used to remove or neutralise pollutants in the environment as well as capturing the carbon in CO2 emissions. Tin, gallium and bismuth when in liquid form can be used as electrodes to convert carbon dioxide into useful byproducts. Another environmental application is that after heating the liquid metals to make oxides, the substances can also be used to absorb energy from light, which enables them to break down contaminants in water.
What makes liquid metals an attractive option in solving environmental problems is the fact they can be cheaply produced using low energy and in a low-tech environment.
“Metals such as tin and bismuth are accessible to many people around the world,” says Professor Kalantar-Zadeh.
“People should just consider how easily, cheaply and with so little need for advanced technology that they can be processed and transformed into useful materials such as catalysts.
“Additionally, playing with liquid metals is fun. While the most famous liquid metal – mercury – is well known to be hazardous, a liquid metal like gallium is completely non-toxic, and meltable at or near room temperature, where we can use it to transform one material to another at very low input energies. Liquid metals could solve lots of problems that we as humans are grappling with these days.”
Learn more: Liquid metals the secret ingredients to clean up environment
The Latest on: Liquid metals
[google_news title=”” keyword=”liquid metals” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Liquid metals
- A Nutrition Breakdown of Liquid Death's Productson May 6, 2024 at 3:30 pm
Liquid Death started as just water, but now it's expanded into iced teas and electrolyte powder. Here, a dietitian breaks down its health pros and cons.
- Researchers discover spontaneous liquefaction of solid metal–liquid metal interfaces in colloidal binary alloyson May 6, 2024 at 7:37 am
The boundary between solid metal and liquid metal can be much less "solid" than we ever suspected. RMIT researchers have discovered that the liquid-solid boundary can fluctuate back and forth, with ...
- USS San Diego pilots ADDiTEC’s liquid metal jetting technologyon May 1, 2024 at 3:23 am
Amphibious Transport Dock USS San Diego (LPD 22) sailors have tested ADDiTEC’s ElemX liquid metal Additive Manufacturing for the fleet.
- Liquid metal synthesis of diamonds achieved at atmospheric pressureon April 30, 2024 at 1:30 am
Diamonds have been synthesised at atmospheric pressure by researchers in South Korea. The researchers do not yet fully understand the underlying mechanism that forms these diamond films, but it ...
- Vaping linked with higher risk of exposure to toxic metals, study findson April 29, 2024 at 3:30 pm
Vaping intermittently or frequently has been linked with toxic lead and uranium exposure, according to a new study.
- Scientists shorten 'Diamond' growth process from billions of years to a few minutes with Liquid Metalon April 28, 2024 at 12:26 am
Scientists have achieved a remarkable feat by developing a method to grow diamonds in just 150 minutes, utilizing a special liquid metal mix instead of traditional high-pressure techniques.
- Scientists Grow Diamonds In Minutes Using Liquid Metalon April 25, 2024 at 9:22 am
Researchers have devised a new liquid metal alloy system for producing diamonds at moderate pressure conditions.
- Using liquid metal to develop energy storage systems with 100 times better heat transferon April 24, 2024 at 12:57 pm
The industrial production of steel, concrete, or glass requires more than 20% of Germany's total energy consumption. Up to now, 90% of the fuels used for these processes have been of fossil nature.
- Scientists develop novel liquid metal alloy system to synthesize diamond under moderate conditionson April 24, 2024 at 8:00 am
Did you know that 99% of synthetic diamonds are currently produced using high-pressure and high-temperature (HPHT) methods? A prevailing paradigm is that diamonds can only be grown using liquid metal ...
- Energy Storage Systems: 100 Times Better Heat Transfer Thanks to the Use of Liquid Metalon April 24, 2024 at 1:03 am
The industrial production of steel, concrete, or glass requires more than 20 percent of Germany’s total energy consumption. Up to now, 90 percent of ...
via Bing News