Using microfluidic passages cut directly into the backsides of production field-programmable gate array (FPGA) devices, Georgia Institute of Technology researchers are putting liquid cooling right where it’s needed the most – a few hundred microns away from where the transistors are operating.
Combined with connection technology that operates through structures in the cooling passages, the new technologies could allow development of denser and more powerful integrated electronic systems that would no longer require heat sinks or cooling fans on top of the integrated circuits. Working with popular 28-nanometer FPGA devices made by Altera Corp., the researchers have demonstrated a monolithically-cooled chip that can operate at temperatures more than 60 percent below those of similar air-cooled chips.
In addition to more processing power, the lower temperatures can mean longer device life and less current leakage. The cooling comes from simple de-ionized water flowing through microfluidic passages that replace the massive air-cooled heat sinks normally placed on the backs of chips.
“We believe we have eliminated one of the major barriers to building high-performance systems that are more compact and energy efficient,” said Muhannad Bakir, an associate professor and ON Semiconductor Junior Professor in the Georgia Tech School of Electrical and Computer Engineering. “We have eliminated the heat sink atop the silicon die by moving liquid cooling just a few hundred microns away from the transistors. We believe that reliably integrating microfluidic cooling directly on the silicon will be a disruptive technology for a new generation of electronics.”
Supported by the Defense Advanced Research Projects Agency (DARPA), the research is believed to be the first example of liquid cooling directly on an operating high-performance CMOS chip. Details of the research were presented on September 28 at the IEEE Custom Integrated Circuits Conference in San Jose, Calif.
Liquid cooling has been used to address the heat challenges facing computing systems whose power needs have been increasing. However, existing liquid cooling technology removes heat using cold plates externally attached to fully packaged silicon chips – adding thermal resistance and reducing the heat-rejection efficiency.
To make their liquid cooling system, Bakir and graduate student Thomas Sarvey removed the heat sink and heat-spreading materials from the backs of stock Altera FPGA chips. They then etched cooling passages into the silicon, incorporating silicon cylinders approximately 100 microns in diameter to improve heat transmission into the liquid. A silicon layer was then placed over the flow passages, and ports were attached for the connection of water tubes.
In multiple tests – including a demonstration for DARPA officials in Arlington, Virginia – a liquid-cooled FPGA was operated using a custom processor architecture provided by Altera. With a water inlet temperature of approximately 20 degrees Celsius and an inlet flow rate of 147 milliliters per minute, the liquid-cooled FPGA operated at a temperature of less than 24 degrees Celsius, compared to an air-cooled device that operated at 60 degrees Celsius.
Sudhakar Yalamanchili, a professor in the Georgia Tech School of Electrical and Computer Engineering and one of the research group’s collaborators, joined the team for the DARPA demonstration to discuss electrical-thermal co-design.
“We have created a real electronic platform to evaluate the benefits of liquid cooling versus air cooling,” said Bakir. “This may open the door to stacking multiple chips, potentially multiple FPGA chips or FPGA chips with other chips that are high in power consumption. We are seeing a significant reduction in the temperature of these liquid-cooled chips.”
The research team chose FPGAs for their test because they provide a platform to test different circuit designs, and because FPGAs are common in many market segments, including defense. However, the same technology could also be used to cool CPUs, GPUs and other devices such as power amplifiers, Bakir said.
In addition to improving overall cooling, the system could reduce hotspots in circuits by applying cooling much closer to the power source. Eliminating the heat sink could allow more compact packaging of electronic devices – but only if electrical connection issues are also addressed.
In a separate research project, Bakir’s group has demonstrated the fabrication of copper vias that would run through the silicon columns that are part of the cooling structure fabricated on the FPGAs. Graduate student Hanju Oh, co-advised with College of Engineering Dean Gary May, fabricated high aspect ratio copper vias through the silicon columns, reducing the capacitance of the connections that would carry signals between chips in an array.
“The moment you start thinking about stacking the chips, you need to have copper vias to connect them,” Bakir said. “By bringing system components closer together, we can reduce interconnect length and that will lead to improvements in bandwidth density and reductions in energy use.”
Read more: Liquid Cooling Moves onto the Chip for Denser Electronics
The Latest on: Denser Electronics
[google_news title=”” keyword=”Denser Electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Denser Electronics
- Here’s Everything You Need To Know About Spintronicson April 23, 2024 at 5:00 pm
Spintronics, also known as spin electronics, is a rapidly developing field that explores the potential of utilising the spin of electrons in solid-state devices. Spin is one of the three ...
- Automotive Electronicson April 23, 2024 at 5:00 pm
Recom has created a chassis-mount isolated dc-dc converter for nominal battery voltages from 24 to 90V. Called RMOD360-UW, it can deliver full power continuously with inputs between 27 and 106V, as ...
- Samsung starts production of 290-layer V-NAND chipson April 23, 2024 at 8:31 am
Samsung Electronics, the world’s largest memory ... which is about 50 percent denser and 10 percent more energy efficient than its predecessor that launched in 2022. “We are excited to deliver ...
- Samsung starts production of 290-layer V-NAND chipson April 22, 2024 at 9:26 pm
Samsung Electronics, the world’s largest memory chip maker, said Tuesday it kicked off the mass production of its one-terabit triple-level cell vertical NAND, or V-NAND, which is about 50 percent ...
- 10 Things to Know Before You Buy Refurbished Electronicson April 21, 2024 at 5:00 pm
These tips can help you get a deal and avoid being ripped off when buying refurbished laptops, TVs, phones, and other electronics. I've been writing about computers, the internet, and technology ...
- How do you dispose of old electronics and wires?on April 11, 2024 at 8:25 pm
So how should you dispose of e-waste? It's easy for electronics to pile up but at Repowered in St. Paul, they're breaking even bigger piles down. "They're looking for things were can reuse ...
- How Washington’s local governments have moved to allow for denser housingon April 11, 2024 at 6:33 am
A new state law is requiring the city of Vancouver to allow duplexes, fourplexes and even sometimes sixplexes in any single-family home neighborhood. (Amanda Cowan/The Columbian files) Washington ...
- Federal safety investigators home in on electronics of cargo ship that destroyed Baltimore’s Key Bridgeon April 10, 2024 at 3:50 pm
Federal safety investigators are homing in on the electronic system of the enormous cargo ship that struck Baltimore’s Francis Scott Key Bridge last month, immediately collapsing the span and ...
- Best Places to Sell Your Used Electronics for 2024on April 9, 2024 at 2:01 pm
Adam Oram is a Senior Editor at CNET. He studied Media at Newcastle University and has been writing about technology since 2013. He previously worked as a Senior Writer at iMore, Deals Editor at ...
- The Best Mattresses for Side Sleeperson April 8, 2024 at 5:00 pm
Its foam is also denser than that of cheaper memory-foam mattresses and more likely to hold its shape over time. Sold by Saatva, it comes with a generous 365-day trial, so you can return it if it ...
via Bing News