Plastic pellets that can be used to produce new plastic products. The pellets are made by gas that in turn comes from the mixed combustible waste heated to 600-800 degrees Celsius.
Credit: Johan Bodell, Chalmers
Only a fraction of the material that could be turned into new plastic is currently recycled. Researchers at Chalmers University of Technology in Sweden have now demonstrated how the carbon atoms in mixed waste can replace all fossil raw materials in the production of new plastic. The recycling method is inspired by the natural carbon cycle and could eliminate the climate impact of plastic materials, or even clean the air of carbon dioxide.
“There are enough carbon atoms in waste to meet the needs of all global plastic production. Using these atoms, we can decouple new plastic products from the supply of virgin fossil raw materials. If the process is powered by renewable energy, we also get plastic products with more than 95% lower climate impact than those produced today, which effectively means negative emissions for the entire system,” says Henrik Thunman, Professor of Energy Technology at Chalmers University of Technology and one of the authors of the study published in the Journal of Cleaner Production.
To achieve circular cycles, we need to make better use of the resources already in use in society. Henrik Thunman and his research team want to focus on an important resource that often goes up in smoke today: the carbon atoms in our waste, which are currently incinerated or end up in landfills instead of being recycled. This is made possible with technologies targeting the carbon contained in plastic, paper and wood wastes, with or without food residues, to create a raw material for the production of plastics with the same variety and quality as those currently produced from fossil raw materials.
Just like nature
Current plastic recycling methods are able to replace no more than 15-20% of the fossil raw material needed to meet society’s demand for plastic. The advanced methods proposed by the researchers are based on thermochemical technologies and involve the waste being heated to 600-800 degrees Celsius. The waste then turns into a gas, which after the addition of hydrogen can replace the building blocks of plastics. Using this recycling method could decouple new plastic products from the supply of new fossil raw materials.
The researchers behind the study are developing a thermochemical recycling method that produces a gas which then can be used as a raw material in the same factories in which plastic products are currently being made from fossil oil or gas. Different types of waste, such as old plastic products and paper cups, with or without food residues, are put into the reactors at the Chalmers Power Central.
“The key to more extensive recycling is to look at residual waste in a whole new way: as a raw material full of useful carbon atoms. The waste then acquires value, and you can create economic structures to collect and use the material as a raw material worldwide,” says Henrik Thunman.
The principle of the process is inspired by the natural carbon cycle. Plants are broken down into carbon dioxide when they wither, and carbon dioxide, using the sun as an energy source and photosynthesis, then creates new plants.
“However, our technology differs from the way it works in nature because we don’t have to take the detour via the atmosphere to circulate the carbon in the form of carbon dioxide. All the carbon atoms we need for our plastic production can be found in our waste, and can be recycled using heat and electricity,” says Henrik Thunman.
The researchers’ calculations show that the energy to power such processes can be taken from renewable sources such as solar, wind or hydro power or by burning biomass, and they will be more energy-efficient than the systems in use today. It is also possible to extract excess heat from recycling processes, which in a circular system would compensate for the heat production currently derived from waste incineration, while eliminating the carbon dioxide emissions associated with energy recovery.
Can replace fossil raw materials
The research has been carried out as part of the FUTNERC* project. The researchers have proven that the process can work in collaboration with plastics manufacturer Borealis in Stenungsund, Sweden, where they have verified the results and shown that the raw material can be used to make plastic, replacing the fossil raw materials used today.
“Our goal is to create a circular economy for plastics. Our plastic products are key to the transformation to a sustainable society, so it’s important for us to support research like this. We already have projects that create circularity for our plastic products, but more solutions are needed. Therefore, we are pleased with these excellent results, which can help bring us a step closer to our goal,” says Anders Fröberg, CEO of Borealis AB.
Original Article: Pioneering recycling turns mixed waste into premium plastics with no climate impact
More from: Chalmers University of Technology
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Circular economy for plastics
- If plastic manufacturing goes up 10%, plastic pollution goes up 10%—and we're set for a huge surge in production
In the two decades to 2019, global plastic production doubled. By 2040, plastic manufacturing and processing could consume as much as 20% of global oil production and use up 15% of the annual carbon ...
- Advancing India's Circular Economy: The Journey in E-Waste and Plastic Waste Management
Government entities, in collaboration with private enterprises, are establishing e-waste collection points and recycling facilities across the country.
- How waste plastic is converted into fuel
Discover the game-changing HiCOP method, turning plastic waste into valuable crude oil, leading the charge towards a cleaner, greener future!
- Investing in the circular economy
The concept of a circular economy has gained prominence in recent years, embracing a regenerative system where products and materials are reduced, reused, and recycled, minimising waste and ...
- Let's not trash recycling technologies that could end plastic waste
Some environmental campaigners claim that attempts to create a circular economy for plastics are doomed to fail – but the arguments can be disingenuous ...
Go deeper with Google Headlines on:
Circular economy for plastics
[google_news title=”” keyword=”circular economy for plastics” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Plastics recycling
- Don’t pollute Colorado communities with plastics-to-fuel
Plastic waste is found on the most remote mountains, in the deepest ocean trenches, in our food, our water, and our bodies. It has an enormous climate impact, most of it cannot be recycled and ...
- A Giant Plastics Chemical Recycling Plant Planned for Pennsylvania Died After Two Years. What Happened?
Encina said it’s reviewing new, bigger locations overseas, and chasing growing demand. Critics see multiple fatal flaws with its plans.
- SABIC makes strides in recycling used medical plastic
A proof-of-concept pilot project was conducted in collaboration with the dialysis department at Jessa Hospital in Belgium.
- US Faces Mounting Plastic Waste Challenge With Limited Recycling Solutions After China's 2018 Import Ban: Report
What Happened: The U.S. has been dealing with a plastic waste crisis for several years, Business Insider reported on Thursday. Previously, the U.S. exported 7 million tons of plastic waste annually to ...
- Kickstart: Have the time of your life recycling with Plastic Swayze
Would you recycle more if you knew you were turning over your HDPE bottles to Plastic Swayze? Would Cans Solo shred first? And you just know Dolly Carton is out there sorting nine to five.
Go deeper with Google Headlines on:
Plastics recycling
[google_news title=”” keyword=”plastics recycling” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]