Paper, being a light and foldable raw material, is a cost-efficient and simple means of generating electrically conducting structures
Paper is becoming a high-tech material. Researchers at the Max Planck Institute of Colloids and Interfaces in Potsdam-Golm have created targeted conductive structures on paper using a method that is quite simple: with a conventional inkjet printer, they printed a catalyst on a sheet of paper and then heated it. The printed areas on the paper were thereby converted into conductive graphite. Being an inexpensive, light and flexible raw material, paper is therefore highly suitable for electronic components in everyday objects.
Cost-efficient and flexible microchips are opening up applications in the electronics sector for which silicon chips are too expensive or difficult to make, and for which RFID chips, now available on a widespread basis, simply do not suffice: clothes, for instance, that monitor bodily functions, flexible screens, or labels that give more information about a product then can be printed on the packaging.
Although many scientists around the world are successfully developing flexible chips, they have been forced to almost always rely on plastics as the carrier and, in some cases, use polymers and other organic molecules as conductive components. These materials may meet many requirements; however, they are all, without exception, sensitive to heat. “Their processing cannot be integrated into the usual production of electronics, because temperatures in production can reach over 400 degrees Celsius,” says Cristina Giordano, who leads a working group at the Max Planck Institute of Colloids and Interfaces and as now come up with an alternative solution.
Paper electronics enables three-dimensional conductive structures
Carbon electronics, which Giordano and her colleagues create from paper, can withstand temperatures of around 800 degrees Celsius during production in an oxygen-free environment, and would not have a negative impact on established processes. And that is not the only trump card of paper-based electronics. The light and inexpensive material can be processed very easily, even into three-dimensional conductive structures.
The Potsdam-based researchers convert the cellulose of the paper into graphite with iron nitrate serving as the catalyst. “Using a commercial inkjet printer, we print a solution of the catalyst in a fine pattern on a sheet of paper,” says Stefan Glatzel, who is responsible for bringing electronics to paper in his doctoral thesis. If the researchers then heat the sheets that were printed with a catalyst to 800 degrees Celsius in a nitrogen atmosphere, the cellulose will continue to release water until all that remains is pure carbon. Whereas an electrically conducting mixture of regularly structured carbon sheets of graphite and iron carbide forms in the printed areas, the non-printed areas are left behind as carbon without a regular structure, and they are less conductive.
That actual, precisely formed conducting paths are created in this way was demonstrated by the researchers in a simple experiment: First, they printed the catalyst on a sheet of paper in the pattern of Minerva, the subtle symbol of the Max Planck Society. The printed pattern was then converted into graphite. They then used the graphite Minerva as a cathode, which was electrolytically coated with copper. The metal was only deposited on the lines sketched by the printer.
An origami crane dressed in copper
In another experiment, the team in Potsdam demonstrated how three-dimensional, conductive structures can be created using their method. For this experiment, the team folded a sheet of paper into an origami crane. This was then immersed in the catalyst and baked into graphite. “The three-dimensional form was completely retained, but consisted entirely of conductive carbon after the process,” says Stefan Glatzel. He demonstrated this again by electrolytically coating the origami bird with copper. The entire crane subsequently had a copper sheen.
The Latest Bing News on:
Paper based electronics
- Georgia Tech group create world’s first graphene-based semiconductoron April 26, 2024 at 10:13 am
A group of researchers at the Georgia Institute of Technology (Georgia Tech) have created the world’s first functional semiconductor made from graphene, a development that could lead to advanced ...
- Richmond to hold recycling event for paper, electronics and hazardous wasteon April 26, 2024 at 9:02 am
The City of Richmond will offer residents an efficient option to recycle papers, electronics and household hazardous waste items.
- Cellulose-based components mass produced with AP&T press lineon April 25, 2024 at 1:32 pm
To industrialize their manufacturing process, the company contacted AP&T in 2020. “We turned to AP&T for numerous reasons – primarily, because it is a Swedish company with solid experience of meeting ...
- Sharp set to unveil innovative e-paper solutions at Touch Taiwan 2024on April 25, 2024 at 1:02 pm
Sharp, together with its partners Yuantai and Chengmei Materials is all set to showcase a series of e-paper solutions at the Touch Taiwan 2024 event, Yahoo News reported. The company said it will be ...
- New research demonstrates potential of thin-film electronics for flexible chip designon April 24, 2024 at 8:00 am
The mass production of conventional silicon chips relies on a successful business model with large "semiconductor fabrication plants" or "foundries." New research by KU Leuven and imec shows that this ...
- E-voting versus paper ballotson April 24, 2024 at 4:14 am
Allowing independent candidates to contest the next general election in South Africa is a boon for democracy. Prof. Colin Thakur asks if it is time to move to an electronic voting system?
- Opening up the potential of thin-film electronics for flexible chip designon April 23, 2024 at 5:00 pm
The mass production of conventional silicon chips relies on a successful business model with large 'semiconductor fabrication plants' or 'foundries'. New research by shows that this 'foundry' model ...
- Aerogel-based phase change materials improve thermal management, reduce microwave emissions in electronic deviceson April 23, 2024 at 9:25 am
Electronic devices are getting more and more complex as they are built to carry out an ever-increasing number of functions. This can be seen in the increased functionality in our personal devices such ...
- Supreme Court Refuses Kari Lake’s Lawsuit Over Electronic Voting Machines In Arizonaon April 22, 2024 at 1:12 pm
Lake filed a lawsuit challenging the use of Dominion voting machines after losing the gubernatorial election in 2022.
- Paper Trails to Digital Footprints: The Environmental Impact of Switching from Checkson April 22, 2024 at 8:01 am
As the world pivots towards sustainability, the shift from traditional paper checks to digital payment methods is gaining attention not only for its convenience and security but also for its ...
The Latest Google Headlines on:
Paper based electronics
[google_news title=”” keyword=”paper based electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Paper electronics
- ‘We want to get it right this year:’ King William Fair set to use paper tickets on Saturdayon April 27, 2024 at 12:30 am
The decision to return to using paper tickets at this year's King William Fair comes after fairgoers faced issues using an electronic wristband system last year.
- SC backs EVMs, rules out revival of paper ballotson April 26, 2024 at 10:32 pm
The Supreme Court on Friday upheld the electronic voting machine (EVM) system of polling and refused a plea to revive paper ballots. “The weakness of the ballot paper system is ...
- Richmond to hold recycling event for paper, electronics and hazardous wasteon April 26, 2024 at 9:02 am
The City of Richmond will offer residents an efficient option to recycle papers, electronics and household hazardous waste items.
- Electronic records add more CO2 than paper: Studyon April 25, 2024 at 9:02 pm
Aravind Eye Hospital study in Puducherry reveals electronic medical records emit more CO2 than paper versions, except when powered by renewables like ...
- Sharp set to unveil innovative e-paper solutions at Touch Taiwan 2024on April 25, 2024 at 1:02 pm
Sharp, together with its partners Yuantai and Chengmei Materials is all set to showcase a series of e-paper solutions at the Touch Taiwan 2024 event, Yahoo News reported. The company said it will be ...
- Arkansas bans electronic voter registration signatures, voting groups call 'shameful'on April 24, 2024 at 3:47 pm
“The signature acts as an identification mark.” An electronic signature might be less likely to match one signed with ink on paper, he said, and in that case, the county clerk would need to contact ...
- New research demonstrates potential of thin-film electronics for flexible chip designon April 24, 2024 at 8:00 am
The mass production of conventional silicon chips relies on a successful business model with large "semiconductor fabrication plants" or "foundries." New research by KU Leuven and imec shows that this ...
- Supreme Court Refuses Kari Lake’s Lawsuit Over Electronic Voting Machines In Arizonaon April 22, 2024 at 1:12 pm
Lake filed a lawsuit challenging the use of Dominion voting machines after losing the gubernatorial election in 2022.
- Ebook vs paper: which reading medium is better for the environment?on April 21, 2024 at 8:30 pm
If you’re environmentally conscious and love to read, is it time to ditch the dead-tree editions and switch to an ereader?
- READER’S VIEW: Recycling events wrap with record collection of unneeded medication, electronics, paperon April 20, 2024 at 8:00 am
Earth Day serves as a reminder of our collective responsibility to protect the environment. One endeavor that embodies this spirit is my annual spring-cleaning series consisting of ...
The Latest Google Headlines on:
Paper electronics
[google_news title=”” keyword=”paper electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]