Converting heat from electronics into energy using thin film pyroelectric energy conversion

This illustration of the thin film device shows how the system converts waste heat into energy (Illustration by Shishir Pandya).
Nearly 70 percent of the energy produced in the United States each year is wasted as heat. Much of that heat is less than 100 degrees Celsius and emanates from things like computers, cars or large industrial processes. Engineers at the University of California, Berkeley, have developed a thin-film system that can be applied to sources of waste heat like these to produce energy at levels unprecedented for this kind of technology.

The thin-film system uses a process called pyroelectric energy conversion, which the engineers’ new study demonstrates is well suited for tapping into waste-heat energy supplies below 100 degrees Celsius, called low-quality waste heat. Pyroelectric energy conversion, like many systems that turn heat into energy, works best using thermodynamic cycles, kind of like how a car engine works. But unlike the engine in your car, pyroelectric energy conversion can be realized entirely in the solid state with no moving parts as it turns waste heat into electricity.

The new results suggest that this nanoscopic thin-film technology might be particularly attractive for installing on and harvesting waste heat from high-speed electronics but could have a large scope of applications. For fluctuating heat sources, the study reports that the thin film can turn waste heat into useable energy with higher energy density, power density and efficiency levels than other forms of pyroelectric energy conversion.

“We know we need new energy sources, but we also need to do better at utilizing the energy we already have,” said senior author Lane Martin, associate professor of materials science and engineering. “These thin films can help us squeeze more energy than we do today out of every source of energy.”

The research will be published April 16 in the journal Nature Materials. The research was supported, in part, by grants from the Army Research Office and the National Science Foundation.

Pyroelectric behavior has been known for a long time, but accurately measuring the properties of thin-film versions of pyroelectric systems has remained a challenge. A significant contribution of the new study is to demystify that process and improve the understanding of pyroelectric physics.

Martin’s research team synthesized thin-film versions of materials just 50-100 nanometers thick and then, together with the group of Chris Dames, associate professor of mechanical engineering at Berkeley, fabricated and tested the pyroelectric-device structures based on these films. These structures allow the engineers to simultaneously measure the temperature and electrical currents created, and source heat to test the device’s power generation capabilities – all on a film that’s less than 100 nanometers thick.

“By creating a thin-film device, we can get the heat into and out of this system quickly, allowing us to access pyroelectric power at unprecedented levels for heat sources that fluctuate over time,” Martin said. “All we’re doing is sourcing heat and applying electric fields to this system, and we can extract energy.”

This study reports new records for pyroelectric energy conversion energy density (1.06 Joules per cubic centimeter), power density (526 Watts per cubic centimeter) and efficiency (19 percent of Carnot efficiency, which is the standard unit of measurement for the efficiency of a heat engine).

The next steps in this line of research will be to better optimize the thin-film materials to specific waste heat streams and temperatures.

“Part of what we’re trying to do is create a protocol that allows us to push the extremes of pyroelectric materials so that you can give me a waste-heat stream and I can get you a material optimized to address your problems,” Martin said.

Learn more: Thin film converts heat from electronics into energy

See Also
An aerosol jet printer puts down layers of carbon-based electronic inks to create transistors that can be fully recycled using only water, rather than requiring harsh, toxic chemicals. Credit - Jason Arthurs Photography

 

The Latest on: Pyroelectric energy conversion

[google_news title=”” keyword=”pyroelectric energy conversion” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]

via Google News

 

The Latest on: Pyroelectric energy conversion
  • Energy Transfer and Its Nearly 8%-Yielding Dividend Are Stronger Than They Have Ever Been
    on May 25, 2024 at 1:15 am

    The MLP has significantly strengthened its financial foundation to the point where it's now stronger than ever. That enabled Energy Transfer to steadily increase its distribution, which is now above ...

  • Renewable grid in sight? Energy recovery from heat batteries reaches 44%
    on May 24, 2024 at 6:38 am

    The team at (UoM) reports that their new device achieves a power conversion efficiency of 44 percent at 2,615 degrees Fahrenheit (1,435°C), placing it well within the target range for existing ...

  • The company estimates the conversion will take place in 2028.
    on May 23, 2024 at 11:53 am

    The company said the move is a 'significant milestone' in ensuring Alliant Energy has continued access to affordable, reliable and cleaner resources.

  • Solar Energy News
    on May 22, 2024 at 5:00 pm

    Apr. 19, 2024 — A new DC-DC power converter is superior to previous designs and paves the way for more efficient, reliable and sustainable energy storage and conversion solutions. The ...

  • Team fabricates tandem solar cell with power conversion efficiency greater than 20%
    on May 22, 2024 at 12:50 pm

    A research team has demonstrated for the first time a proof-of-concept tandem solar cell using antimony selenide as the bottom cell material and a wide-bandgap organic–inorganic hybrid perovskite ...

  • Surprising Facts To Know About IRA Conversions
    on April 18, 2024 at 7:00 am

    The most popular way to reposition your traditional account is to roll it over to a Roth IRA, also known as an IRA conversion. I believe widespread misinformation and misunderstandings about ...

  • Energy Systems Engineering
    on November 12, 2023 at 12:58 pm

    ESE engineers may choose training in alternative and environmentally-friendly energy conversion systems to complement their education in traditional technologies that will continue to play an ...

  • What are nanogenerators? Explaining their types, applications, and potential
    on April 4, 2023 at 4:22 am

    PyENGs harness the pyroelectric effect, in which certain materials generate ... to improve efficiency and power output. By exploiting multiple energy conversion mechanisms, hybrid nanogenerators can ...

  • How To Convert Currency
    on September 22, 2021 at 4:57 am

    In addition, it is important to note that the exchange rate you receive when trading one currency against another probably will differ from the rate you will obtain during the actual conversion of ...

via  Bing News

 

What's Your Reaction?
Don't Like it!
0
I Like it!
0
Scroll To Top