Energy storage is crucial for taking full advantage of solar power, which otherwise suffers interruptions from cloudy skies and nightfall. In the past few years, concentrating solar power plants have begun producing additional electricity at night and during peak demand periods by using stored heat energy to propel a steam turbine.
Current thermal energy storage systems rely on materials that store less energy per kilogram, requiring more material at a greater cost to meet energy storage requirements.
Now, researchers at the U.S. Department of Energy’s (DOE’s) Argonne National Laboratory have designed an inexpensive thermal energy storage system that will be significantly smaller and perform more than 20 times better than current thermal systems.
With funding from DOE’s SunShot Initiative, the Argonne team is building a pilot-scale prototype of their high-efficiency latent heat thermal energy storage system (LHTES) for testing. The SunShot Initiative is a national collaborative effort to make unsubsidized solar energy cost-competitive with other forms of electricity production by 2020.
Argonne’s thermal energy storage system relies on a “phase-change” material that melts as it stores thermal energy and releases energy as it re-freezes — similar to the charge-discharge cycle in a battery.
Inexpensive salts like rock salt (sodium chloride) can be used as phase-change materials, but their use in existing thermal storage systems is limited because of the poor thermal conductivity of the salts.
However, the Argonne LHTES system drastically improves the conductivity of these salts by integrating them with a high-conductivity graphite foam. This combination reduces the overall amount of material needed to build the system and its cost, while making the thermal energy transfer significantly more efficient and still providing up to 8 to 12 hours of energy storage — a typical night of storage for a concentrating solar power plant.
“Phase-change materials tend to have low conductivity but meet the heat energy storage requirements,” said Dileep Singh, leader of Argonne’s Thermal-Mechanical Technologies group. “High-conductivity graphite foam meets the conductivity requirements, so we thought: why not combine the two?”
The porous graphite foam traps the salts in pores, facilitating rapid melting and freezing. The team demonstrated that this rapid phase change holds up over time. After building and testing an initial prototype about the size of a blender, the team is now scaling up the prototype size by 50 times.
Although still smaller than a full-scale power plant system, the pilot-scale modular system will be tested this fall and could expand on applications, such as providing back-up power on a microgrid or storing waste heat from another energy source. The pilot system will also further improve 3-D thermal modeling used for estimating performance and planning the design of a full-scale system.
“We are looking at developing the full-scale power plant system as a modular system, and the pilot-scale system we are building this year can actually be used as one module within a full-scale system that is made of many modules stacked or organized together,” said Argonne mechanical engineer Wenhua Yu. “Therefore, the performance characteristics we will measure from testing the pilot can directly reflect those of a power plant system.”
The full-scale design is expected to meet the needs of current power plants that operate steam turbines at about 450 to 600 degrees Celsius (850-1100 degrees Fahrenheit) using magnesium chloride as the storage medium. When advanced supercritical carbon dioxide turbines — which are more efficient than steam turbines but operate at a hotter 700 degrees Celsius (1,300 degrees Fahrenheit) — come online, the same design can be used with sodium chloride.
This work is supported by the DOE SunShot Initiative.
The SunShot Initiative is a collaborative national effort that aggressively drives innovation to make solar energy fully cost-competitive with traditional energy sources before the end of the decade. Through SunShot, the DOE supports efforts by private companies, universities, and national laboratories to drive down the cost of solar electricity to $0.06 per kilowatt-hour. Learn more at energy.gov/sunshot.
Learn more: Argonne technology puts solar power to work all night long
The Latest on: Thermal energy storage
[google_news title=”” keyword=”Thermal energy storage” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Thermal energy storage
- Nostromo Energy Shareholders Approve Going-Private Arrangementon May 10, 2024 at 1:38 am
Nostromo Energy Limited (TASE:NOST) provider of the IceBrick® system, a virtual power plant (VPP)-enabled thermal energy storage for commercial and industrial (C&I) buildings, announced today results ...
- IPCL and E2S Power to develop thermal energy storage systemon May 9, 2024 at 4:09 am
Thermal energy storage system technology developed by E2S Power will play a key role in India's pursuit of net zero emissions.
- IPCL and ES2 collaborate for pilot thermal energy storage projecton May 8, 2024 at 9:57 pm
The two companies launched a thermal storage unit with a 250 KWh capacity. Indian Power Corporation Limited (IPCL) and ES2 Power signed an agreement to launch the 250-kilowatt-hour pilot thermal ...
- IPCL, E2S to develop Thermal Energy Storage System for efficient storage, transmissionon May 8, 2024 at 4:54 am
The 250Kwh TESS, developed by E2S, has been synchronized with the IPCL system and will help the company achieve its goal of integrating 80 per cent renewable energy into the distribution system by the ...
- Thermal Energy Storage Innovation: IPCL and E2S Collaborate on Efficient Storage and Transmissionon May 8, 2024 at 4:10 am
India Power and E2S collaborate to establish Thermal Energy Storage System (TESS) for energy efficiency. The 250Kwh TESS, integrated with IPCL, supports the company's goal of integrating 80% renewable ...
- Thermal Energy Storage Market to Grow at CAGR of 15% through 2033 - Advancements in TES Technology to Bolster Growthon May 6, 2024 at 2:00 am
Newark, May 06, 2024 (GLOBE NEWSWIRE) -- The Brainy Insights estimates that the USD 5 billion in 2023 global thermal energy storage market will reach USD 20.22 billion in 2033. The energy that a ...
- Air Conditioning Has a Big Climate Impact. This New Technology Could be a Game Changeron April 16, 2024 at 12:54 pm
The 1.4-megawatt-hour IceBrick™ thermal storage technology, developed by the startup Nostromo Energy, uses water to generate ice during periods of low energy demand, typically when the grid is ...
- MIT Technology Reviewon April 14, 2024 at 5:00 pm
The systems, which can store clean energy as heat, were chosen by readers as the 11th Breakthrough Technology of 2024. We need heat to make everything from steel bars to ketchup packets.
- Salt, air and bricks: could this be the future of energy storage?on April 1, 2024 at 5:35 am
clean and secure renewable energy,” he said. A 2022 report from the consultancy firm McKinsey highlights the advantages of thermal storage, calculating a price of $65-$100 (£51-£79 ...
via Bing News