Despite the rigors of scientific inquiry and the methodical approaches of the world’s most talented researchers, sometimes science has a surprise in store.
Such was the case when a group of researchers from the U.S. Department of Energy’s (DOE’s) Argonne National Laboratory and the University of Akron discovered that a particular form of carbon coating not necessarily designed for wind turbines may indeed prove a boon to the wind industry — a serendipitous finding that was recently highlighted in the journal Tribology International.
Prolonging the life of these components could greatly reduce the cost of wind power, the fastest growing source of energy in the world, thereby making it an even more attractive energy source.
Due to the strenuous environment inherent in wind turbine drivetrains, key components such as actuators, bearings and gears are prone to failure, meaning turbines require regular maintenance that helps drive up the price of wind energy. Prolonging the life of these components could greatly reduce the cost of wind power, the fastest growing source of energy in the world, thereby making it an even more attractive energy source.
These failures are often due to a phenomenon known as micropitting in which the repeated rolling and sliding cycles in the gears and bearings of turbines lead to cracks on the surface of drivetrain components. Further contact only exacerbates the cracking once it begins, chipping away at the metal and increasing the severity of the existing cracks until costly maintenance is necessary or, even worse, the drivetrain fails.
Enter Argonne’s Tribology and Thermal-Mechanics Section and its Surface and Lubrication Interaction, Discovery and Engineering (SLIDE) initiative, which investigates how lubricants and materials interact and develops novel lubrication and coating concepts that reduce friction, and therefore micropitting, prolonging component life across a range of energy technologies.
And sometimes they get a little lucky. Such was the case when SLIDE researchers applied this “diamond-like” (some of the carbon-to-carbon bonding in the coating is similar to that of diamonds) coating to wind turbine components, which was not the intended use.
“We felt that if it was working under other sliding conditions, it might work in wind turbine drivetrains as well,” said SLIDE’s Ali Erdemir, an Argonne Distinguished Fellow. “Initially, our expectations were low, as we thought the coating would wear out due to the high stresses inherent in wind turbines, but that didn’t happen.”
So far the coating, named N3FC, has proven its worth through more than 100 million testing cycles with no appreciable micropitting.
Erdemir admits that they don’t know exactly how far it could go, as it has surpassed the time limit of SLIDE’s benchtop micropitting test rig. If the coating performs similarly under real-world conditions, it could mean huge savings in terms of maintenance and prevention of failure in wind turbines nationwide — to the tune of millions of dollars, said Erdemir.
But first, he added, they need to learn exactly why it works.
“We don’t yet understand the exact mechanism,” said Erdemir. “The general belief is that component wear life extension requires a much harder coating, as more hardness reduces wear. But in this case the coating has less hardness than the base steel, so conventional thought doesn’t apply.”
The team is now eager to work with companies and see how N3FC performs in the field. Until then, they will stay busy trying to discover the mechanism behind this surprising scientific development. “We would love to get to the bottom of this and design even better coatings,” said Erdemir.
The team is also testing the coating in sealing applications for compressors. As a low-friction surface coating, it may also prove beneficial in natural gas and hydrogen environments. “It appears to have multiple capabilities in terms of performance,” said Erdemir.
Learn more: Gone with the wind: Argonne coating shows surprising potential to improve reliability in wind power
The Latest on: Wind turbines
[google_news title=”” keyword=”wind turbines” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Wind turbines
- Brooklyn Gets a Wind Energy Makeover As Old Waterfront to Become Wind Hubon April 27, 2024 at 2:32 am
A giant construction company called Skanska has been chosen to transform a Brooklyn waterfront area into a major center for offshore wind power. An old shipping terminal in South Brooklyn will be ...
- Exclusive: Inside look at new wind turbine factory in Belenon April 26, 2024 at 10:17 pm
KOB 4 got an exclusive look inside a new wind turbine factory in Belen Friday. “And this company is a great example, we’re now poised to be the leader in the wind industry but a few years ago, they ...
- Wind Repowering: Putting Old Wind Turbines Back Into Serviceon April 26, 2024 at 3:53 pm
Wind repowering means revamping old turbines with more efficient components, or putting in new, state-of-the-art turbines on the site where outdated ones once stood.
- Will climate change suck the air out of Illinois' wind power industry?on April 26, 2024 at 11:43 am
Wind and solar are supposed to replace coal plants that are closing, but that didn’t happen in 2023. Another fossil fuel, natural gas, filled the void.
- Offshore Wind Farms Face Power Challengeson April 26, 2024 at 7:53 am
Using computer simulations and observational data of the atmosphere, the team calculated that the wake effect reduces total power generation by 34 percent to 38 percent at a proposed wind farm off the ...
- Will There Be Less Wind to Fuel Wind Energy?on April 26, 2024 at 3:29 am
Illinois policy says wind and solar are supposed to replace coal plants that are closing, but that didn’t happen in 2023. Another fossil fuel, natural gas, filled the void instead.
- Gusts of activity underway by friends and foes of offshore wind energy projectson April 25, 2024 at 3:27 pm
Supporters of offshore wind energy projects in New Jersey and New York are trading blows with opponents in some shore towns who say vacationers and local residents don't want to see turbines filling ...
- Worker dies in fall from wind turbine near Windthorston April 25, 2024 at 12:57 pm
A man died after he fell from a wind turbine near Windthorst on Wednesday. He was identified Thursday as Marco Anthony Portillo, Jr., 31, of Weslaco. Archer County Sheriff Jack Curd said his office ...
- Man killed from fall inside wind turbine identifiedon April 25, 2024 at 12:09 pm
ARCHER COUNTY ( KFDX/KJTL) — The man who died after falling inside of a wind turbine has been identified. Archer County Sheriff Jack Curd identified the man as 31-year-old Marco Anthony Portillo Jr.
- GE Vernova could not agree turbines switch on NY wind projects, CEO sayson April 25, 2024 at 5:02 am
Power services company GE Vernova could not reach an agreement to supply smaller turbines for three New York offshore wind developments before the contracts were canceled, CEO Scott Strazik told ...
via Bing News