Schematic of a double thin film layered solar cell. The sun enters at the top and reaches the CIGS and CZTSSe layers that absorb the light and create positive and negative particles that travel to the top and bottom contact layers, producing electricity. IMAGE: AKHLESH LAKHTAKIA, PENN STATE
Solar cells have come a long way, but inexpensive, thin film solar cells are still far behind more expensive, crystalline solar cells in efficiency. Now, a team of researchers suggests that using two thin films of different materials may be the way to go to create affordable, thin film cells with about 34% efficiency.
“Ten years ago I knew very little about solar cells, but it became clear to me they were very important,” said Akhlesh Lakhtakia, Evan Pugh University Professor and Charles Godfrey Binder Professor of Engineering Science and Mechanics, Penn State.
Investigating the field, he found that researchers approached solar cells from two sides, the optical side — looking on how the sun’s light is collected — and the electrical side — looking at how the collected sunlight is converted into electricity. Optical researchers strive to optimize light capture, while electrical researchers strive to optimize conversion to electricity, both sides simplifying the other.
“I decided to create a model in which both electrical and optical aspects will be treated equally,” said Lakhtakia. “We needed to increase actual efficiency, because if the efficiency of a cell is less than 30% it isn’t going to make a difference.” The researchers report their results in a recent issue of Applied Physics Letters.
Lakhtakia is a theoretician. He does not make thin films in a laboratory, but creates mathematical models to test the possibilities of configurations and materials so that others can test the results. The problem, he said, was that the mathematical structure of optimizing the optical and the electrical are very different.
Solar cells appear to be simple devices, he explained. A clear top layer allows sunlight to fall on an energy conversion layer. The material chosen to convert the energy, absorbs the light and produces streams of negatively charged electrons and positively charged holes moving in opposite directions. The differently charged particles get transferred to a top contact layer and a bottom contact layer that channel the electricity out of the cell for use. The amount of energy a cell can produce depends on the amount of sunlight collected and the ability of the conversion layer. Different materials react to and convert different wavelengths of light.
“I realized that to increase efficiency we had to absorb more light,” said Lakhtakia. “To do that we had to make the absorbent layer nonhomogeneous in a special way.”
That special way was to use two different absorbent materials in two different thin films. The researchers chose commercially available CIGS — copper indium gallium diselenide — and CZTSSe — copper zinc tin sulfur selenide— for the layers. By itself, CIGS’s efficiency is about 20% and CZTSSe’s is about 11%.
These two materials work in a solar cell because the structure of both materials is the same. They have roughly the same lattice structure, so they can be grown one on top of the other, and they absorb different frequencies of the spectrum so they should increase efficiency, according to Lakhtakia.
“It was amazing,” said Lakhtakia. “Together they produced a solar cell with 34% efficiency. This creates a new solar cell architecture — layer upon layer. Others who can actually make solar cells can find other formulations of layers and perhaps do better.”
According to the researchers, the next step is to create these experimentally and see what the options are to get the final, best answers.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Thin film solar cells
- Perovskite Solar Cells: What Are They & How Do They Work?
This renewable energy technology has shown huge potential for over a decade, if only a few large obstacles could be overcome on the road to market.
- Solar cells from TalTech to upsurge Internet of Things expansion
The world around us is getting smarter thanks to networked sensors and actuators, but powering them poses a serious challenge. The Internet of Things could be boosted by thin solar panels that can ...
- Midsummer ties up with thin film solar panel maker Kaisheng
Swedish solar energy company Midsummer has started a collaboration with the Chinese manufacturer of thin film solar panels Kaisheng New Energy Technology. Kaisheng will produce thin film solar roof ...
- Light, flexible, efficient: Perovskite-based tandem solar cells
Today, more and more Swiss roofs boast large black and blue rectangles that convert sunlight into electricity. The blueish color comes from silicon crystals, as the majority of solar cells available ...
- Perovskite-based tandem solar cells
Solar cells made from other materials offer a way to overcome this limitation, says Empa researcher Fan Fu. The group leader in the Laboratory for Thin Films and Photovoltaics is researching highly ...
Go deeper with Google Headlines on:
Thin film solar cells
[google_news title=”” keyword=”thin film solar cells” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Solar cells
- What's the cheapest way to get solar panels installed… and is it only worth doing on a south facing roof?
When it comes to adding green technology upgrades to their properties, more often than not the first port of call for homeowners is solar panels. Homes across the country have been fitted with ...
- Perovskite Solar Cells: What Are They & How Do They Work?
This renewable energy technology has shown huge potential for over a decade, if only a few large obstacles could be overcome on the road to market.
- The Mandatory Solar Panel
In California, why leave anything to personal choice?
- Can’t install your own solar panels? Some areas let you join a community project.
Lawmakers in many states, including Virginia, have passed or are considering bills to enable community solar projects, which allow renters and others who can’t install rooftop panels to buy into local ...
- Do solar panels add value to your farmstead?
According to Faiq Mihlar, managing partner for Heavner, Beyers and Mihlar, and general counsel for the Central Illinois Board of Realtors, it really comes down to the original transaction on the solar ...
Go deeper with Google Headlines on:
Solar cells
[google_news title=”” keyword=”solar cells” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]