During a stroll, a woman’s breathing becomes a slight bit shallower, and a monitor in her clothing alerts her to get a telemedicine check-up. A new study details how a sensor chip smaller than a ladybug records multiple lung and heart signals along with body movements and could enable such a future socially distanced health monitor.
The core mechanism of the chip developed by researchers at the Georgia Institute of Technology involves two finely manufactured layers of silicon, which overlay each other separated by the space of 270 nanometers – about 0.005 the width of a human hair. They carry a minute voltage.
Vibrations from bodily motions and sounds put part of the chip in flux, making the voltage flux, too, thus creating readable electronic outputs. In human testing, the chip has recorded a variety of signals from the mechanical workings of the lungs and the heart with clarity, signals that often escape meaningful detection by current medical technology.
“Right now, medicine looks to EKGs (electrocardiograms) for information on the heart, but EKGs only measure electrical impulses. The heart is a mechanical system with muscles pumping and valves opening and shutting, and it sends out a signature of sounds and motions, which an EKG does not detect. EKGs also say nothing about lung function,” said Farrokh Ayazi, Ken Byers Professor in Georgia Tech’s School of Electrical and Computer Engineering.
Stethoscope-accelerometer combo
The chip, which acts as an advanced electronic stethoscope and accelerometer in one, is aptly called an accelerometer contact microphone. It detects vibrations that enter the chip from inside the body while keeping out distracting noise from outside the body’s core like airborne sounds
“If it rubs on my skin or shirt, it doesn’t hear the friction, but the device is very sensitive to sounds coming at it from inside the body, so it picks up useful vibrations even through clothing,” Ayazi said.
The detection bandwidth is enormous – from broad, sweeping motions to inaudibly high-pitched tones. Thus, the sensor chip records all at once fine details of the heartbeat, waves the heart sends through the body, and respiration rates and lung sounds. It even tracks the wearer’s physical activities such as walking.
The signals are recorded in sync, potentially offering the big picture of a patient’s heart and lung health. For the study, the researchers successfully recorded a “gallop,” a faint third sound after the “lub-dub” of the heartbeat. Gallops are normally elusive clues of heart failure.
The researchers published their results in the journal npj Digital Medicine on February 12, 2020. The research was funded by the Georgia Research Alliance, the Defense Advanced Research Projects Agency (DARPA), the National Science Foundation, and the National Institutes of Health. Study coauthor Divya Gupta, M.D., a cardiologist at Emory University, collaborated in testing the chip on human participants.
Hermetically sealed vacuum
Medical research has tried to make better use of the body’s mechanical signals for decades but recording some – like waves traversing multiple tissues – has proven inconsistent, while others – like gallops – have relied upon clinician skills influenced by human error. The new chip produces high-resolution, quantified data that future research could match to pathologies in order to identify them.
“We are working already to collect significantly more data matched with pathologies. We envision algorithms in the future that may enable a broad array of clinical readings,” Ayazi said.
Though the chip’s main engineering principle is simple, making it work and then manufacturable took Ayazi’s lab ten years, mainly because of the Lilliputian scale of the gap between the silicon layers, i.e. electrodes. If the 2-millimeter by 2-millimeter sensor chip were expanded to the size of a football field, that air gap would be about an inch wide.
“That very thin gap separating the two electrodes cannot have any contact, not even by forces in the air in between the layers, so the whole sensor is hermetically sealed inside a vacuum cavity,” Ayazi said. “This makes for that ultralow signal noise and breadth of bandwidth that are unique.”
Detects through clothing
The researchers used a manufacturing process developed in Ayazi’s lab called the HARPSS+ platform (High Aspect Ratio Poly and Single Crystalline Silicon) for mass production, running off hand-sized sheets that were then cut into the tiny sensor chips. HARPSS+ is the first reported mass manufacturing process that achieves such consistently thin gaps, and it has enabled high-throughput manufacturing of many such advanced MEMS, or microelectromechanical systems.
The experimental device is currently battery-powered and uses a second chip called a signal-conditioning circuit to translate the sensor chip’s signals into patterned read-outs.
Three sensors or more could be inserted into a chest band that would triangulate health signals to locate their sources. Someday a device may pinpoint an emerging heart valve flaw by turbulence it produces in the bloodstream or identify a cancerous lesion by faint crackling sounds in a lung.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Sensor chip
- I turned my Raspberry Pi into a full-fledged weather station here's how you can, too
Keep tabs on the temperature, barometric pressure, and humidity values of your surroundings with the palm-sized Raspberry Pi ...
- Lidar: Another emerging technology brought to you by China
Opinion: More must be done to safeguard U.S. data and prevent dependence on geopolitical adversaries for a critical, emerging technology.
- Luminar unveils new compact lidar sensor Halo, tie-up with Applied Intuition
Luminar Technologies launched its latest lidar sensor on Tuesday and said it has partnered with auto software maker Applied Intuition to aid automakers in testing their assisted-driving systems.
- Luminar starts shipping lidar for Volvo EX90 — while readying its next-gen sensor
The placement allows the sensor to sort of blend into the roofline ... Halo will use four next-generation chips from Luminar Semiconductor Inc., which it says will enable four times performance ...
- Test chip demos for LDO, power management on TSMC N3P
Analog Bits will demo silicon for LDO and power supply droop detectors on N3P process at TSMC 2024 North America Technology Symposium.
Go deeper with Google Headlines on:
Sensor chip
[google_news title=”” keyword=”sensor chip” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Distanced health monitor
- Oura Ring Gen3 health tracker review: It’s a complicated relationship
There’s a lot to like about the Oura Ring, but is it … well-rounded? Here’s a look at the features and frustrations.
- What It Takes to Build the Unbeatable Body
Read a National Geographic magazine article about elite athletes and get information, facts, and more about super performers.
- How to Track Your Health at Home
Blood pressure monitor? Fitness tracker? Cholesterol tests? Here's what you need and what you can skip.By Hallie LevineNearly one-third of Americans do not have a primary care provider, a number ...
- Exploring geography-based health disparities in Michigan
The Michigan Daily spoke to researchers from three different studies that examined disparities in care in different geographic areas of MI.
- In Today’s Issue
Login Monitor journalism changes lives because we ... At least 34,000 Palestinians have been killed as of April 21, according to the Gaza Health Ministry. Another Columbia student, who wore ...
Go deeper with Google Headlines on:
Distanced health monitor
[google_news title=”” keyword=”distanced health monitor” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]