Microneedle technology offers several advantages over traditional vaccines, including ease of application and the reduction of hazardous medical waste (courtesy of Thanh Nguyen)
A single-use, self-administered microneedle technology developed by UConn faculty to provide immunization against infectious diseases has recently been validated by preclinical research trials.
Recently published in Nature Biomedical Engineering, the development and preclinical testing of the microneedle patches was reported by UConn researchers in the lab of Thanh Nguyen, assistant professor in the Departments of Mechanical Engineering and Biomedical Engineering.
The concept of a single-injection vaccine, which is recognized as a preferable vaccination approach by the World Health Organization (WHO), has been investigated for many years. Previous efforts to create such a single-injection vaccine include a technology called SEAL (StampEd Assembly of Polymer Layer), developed in 2017 by Nguyen, to create single-injection vaccine microparticles which can deliver vaccines after several defined periods, simulating multiple bolus injections.
However, these microparticles require a large needle for the injection. Additionally, there is also a limited number of the particles that can be loaded into the needle, which means only a limited vaccine dose can be delivered. Ultimately, the microparticles still require traditional injections, which are painful and produce unfavorable biohazard wastes from disposed sharp syringes.
“It has been recognized for a long time that there is a need to eliminate many injections in conventional vaccination process,” Thanh says. “While booster and repeated shots of vaccines are important to sustain immune-protection, these injections are associated with pain, high costs, and complicated injection schedules, causing a very low patient compliance. The issue becomes more problematic for patients in developing countries due to their limited access to health care providers. In such places, parents struggle to remember the schedule and cannot afford to repeatedly travel long distances with their children to medical centers to receive multiple booster doses of vaccines.”
As detailed in Nature Biomedical Engineering, to overcome these problems, Nguyen’s lab at UConn developed a microneedle skin patch, which only requires a single administration to perform exactly the same programmable delayed release of vaccine, as that obtained from the SEAL microparticles.
The microneedle patch avoids any painful injections, offering a significant enhancement from the perspective of patients. Extensive research has shown microneedle skin patches are almost painless, and could even be self-administered by patients at home. The patch is small, portable, and similar to a nicotine patch, which could be easily distributed to all people over the world for self-administration in the case of a pandemic such as the COVID-19 crisis to quickly create a pan-immunity at the global scale.
The microneedles have a core-shell microstructure, in which the microneedle shells are made with biodegradable medical polymer that is FDA-approved for implants, and offers unique drug-release kinetics—which allows a preprogrammed burst release of vaccine loads over a period of a few days to more than a month from a single administration. The microneedles can be easily inserted and fully embedded inside the dermal layer, thanks to the miniscule tips and smooth geometry of the needles.
To create this vaccine microneedle patch, Khanh Tran, a PhD student in Nguyen’s lab and the lead author of the published work, adapted the SEAL technology to assemble different microneedle components, including a cap, shell, and vaccine core. These components are manufactured in an additive manner, similar to the approach of 3D printing, to create arrays of core-shell microneedles over a large area.
Nguyen’s team devised several new approaches to overcome many issues of the existing SEAL technology. The key novelty of their new manufacturing process is to micro-mold vaccines into the shape of the microneedle core, and insert all of the molded vaccine cores into arrays of the microneedle shells at the same time, offering a fabrication method similar to the manufacturing process of computer chips, as shown in this video:
“This is a tremendous advantage, compared to the previously-reported SEAL and other traditional methods to fabricate vaccine carriers, in which vaccine is often filled slowly one by one into each polymeric shell/carrier,” Tran says.
In the preclinical trials, the researchers inserted microneedles loaded with a clinically available vaccine (Prevnar-13) into the skin of rats in a minimally invasive manner. The patch application caused no skin irritation during long-term implantation, and triggered a high immune protection response against a lethal dose of infectious pneumococcal bacteria. The results from the one-time administration were similar to that obtained from multiple injections of the same vaccine over a period of approximately two months.
“We are very excited for this achievement, as for the first time, a onetime-use and injection-free skin patch can be pre-programmed to release vaccines at different times to provide a long-term and effective immune protection,” Nguyen says. “The microneedle patch could facilitate the global effort for a complete vaccination process to eradicate dangerous infectious diseases and enable a quick distribution of vaccines. This could create a pan-community immune-protection at a global scale in the case of a pandemic such as the COVID-19,” Nguyen says.
In this regard, Nguyen and and his collaborator, Associate Professor Steve Szczepanek in the Department of Pathobiology and Veterinary Science in the College of Agriculture, Health, and Natural Resources have also received a $432,990 contract from the U.S. Department of Health and Human Services (HHS) BARDA to develop this technology.
Looking into the future, more research is needed in order to bring the microneedle patch into clinical use. While the researchers have shown the ability to use the patch for the pneumococcal vaccines, different vaccines would require different strategies for stabilization so they can be functional over a long period of implantation inside the skin.
The researchers are also working on the optimization and automation of the fabrication process, which can reduce the cost of the microneedle skin patch for clinical use. Future works on larger animal models closely mimicking human immune systems are also needed to verify the safety and efficacy of the microneedle platforms.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Microneedle patches
- Africa Live: Zimbabwe launches new notes for third currency in decade
South African actor John Kani, who voiced Rafiki in the initial 2019 live action remake of The Lion King, will reprise his role. The younger Rafiki will be voiced by another South African great - ...
- Vaccine plasters could spell the end for childhood jabs
Childhood vaccines could soon be given painlessly in the form of plasters delivered in the post instead of jabs at the GP.
- Microarray Patches Safe and Effective for Vaccinating Children, Study Finds
The first study of the use of microarray patches to vaccinate children has shown that the method is safe and induces strong immune responses.
- Africa Live: Kenya cabinet meets as flood death toll nears 170
President Ruto says the special meeting will discuss additional measures on flood mitigation - and more stories ...
- Patch to protect against measles in children shows promise
A vaccine patch could be a safe and effective alternative way to protect young children against measles, a trial in The Gambia suggests. The device - the size of a sticking plaster - is easier to ...
Go deeper with Google Headlines on:
Microneedle patches
[google_news title=”” keyword=”microneedle patches” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Microneedle skin patch
- Painless Skin Patch Could Deliver Vaccines to Kids
Kids who don’t like vaccination shots might soon have an alternative in a painless skin patch, researchers say.More ...
- Vaccine plasters could spell the end for childhood jabs
Childhood vaccines could soon be given painlessly in the form of plasters delivered in the post instead of jabs at the GP.
- Microarray Patches Safe and Effective for Vaccinating Children, Study Finds
The first study of the use of microarray patches to vaccinate children has shown that the method is safe and induces strong immune responses.
- Measles and rubella vaccine delivered via microarray patch shows promising results
The phase 1/2 randomized trial compared results from the measles and rubella vaccine delivered by a microarray patch, a small sticking plaster-like device with an array of microscopic projections that ...
- Patch to protect against measles in children shows promise
A vaccine patch could be a safe and effective alternative way to protect young children against measles, a trial in The Gambia suggests. The device - the size of a sticking plaster - is easier to ...
Go deeper with Google Headlines on:
Microneedle skin patch
[google_news title=”” keyword=”microneedle skin patch” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]