A self-healing, water-repellent coating that’s ultra durable
It could enable waterproofing of vehicles, clothing, rooftops and countless other surfaces for which current waterproofing treatments are too fragile. It could also lower the resistance of ship hulls, a step that would reduce the fuel consumption of the massive vessels that transport 90 percent of the world’s cargo.
The developers say the new concoction is a breakthrough in a field where decades of research have failed to produce a durable coating. While water-repellent finishes are available at present, they’re typically not strong enough for applications like clothing or ship hulls. This discovery changes that.
“Thousands of superhydrophobic surfaces have been looked at over the past 20 or 30 years, but nobody has been able to figure out how to systematically design one that’s durable,” said Anish Tuteja, U-M associate professor of materials science and engineering. “I think that’s what we’ve really accomplished here, and it’s going to open the door for other researchers to create cheaper, perhaps even better superhydrophobic coatings.”
The coating is made of a mix of a material called “fluorinated polyurethane elastomer” and a specialized water-repellent molecule known as “F-POSS.” It can be easily sprayed onto virtually any surface and has a slightly rubbery texture that makes it more resilient than its predecessors.
If it is damaged, the coating can heal itself hundreds of times. It can bounce back “even after being abraded, scratched, burned, plasma-cleaned, flattened, sonicated and chemically attacked,” the researchers wrote in a paper recently published in ACS Applied Materials & Interfaces.
In addition to recovering physically, the coating can heal itself chemically. If water-repellent F-POSS molecules are scraped from the surface, new molecules will naturally migrate there to replace them. That’s how the coating can renew itself hundreds of times. Its healing ability is limited only by its thickness.
The discovery is being commercialized by HygraTek, a company founded by Tuteja with assistance from U-M Tech Transfer.
Beyond the coatings detailed in the paper, the project produced what amounts to a recipe that researchers can use to optimize future coatings to a specific application’s requirements for cost, durability and other factors.
As lead author and U-M doctoral student Kevin Golovin explains, the team used a process that was radically different from previous research in the field.
“Most materials science researchers have focused on identifying one specific chemical system that’s as durable and water-repellent as possible,” he said. “We approached the problem differently, by measuring and mapping out the basic chemical properties that make a water-repellent coating durable. And some of the results surprised us.”
For example, most hydrophobic coatings are made of two main ingredients: an active molecule that provides the water-repellency and a binder. Generally, researchers have assumed that using more durable ingredients would make a more durable coating. But Tuteja’s team found that that’s not necessarily the case.
They discovered that even more important than durability is a property called “partial miscibility,” or the ability of two substances to partially mix together. The other key variable the team discovered is the stability of the water-repellent surface.
Most water-repellent coatings work because their surface has a very specific geometry, often microscopic pillars. Water droplets perch on the tips of these pillars, creating air pockets underneath that deny the water a solid place to rest and cause it to roll off easily. But such surfaces tend to be fragile—slight abrasion or even the pressure of the water itself can damage them.
The team’s research found that a surface that’s slightly pliable can escape this pitfall—even though it seems less durable, its pliable properties enable it to bounce back from damage.
Tuteja estimates that the coatings will be available for use before the end of 2017 for applications including water-repellent fabrics and spray-on coatings that can be purchased directly by consumers.
Learn more: A self-healing, water-repellent coating that’s ultra durable
[osd_subscribe categories=’superhydrophobic-nanomaterials’ placeholder=’Email Address’ button_text=’Subscribe Now for any new posts on the topic “SUPERHYDROPHOBIC NANOMATERIALS”‘]
The Latest on: Superhydrophobic nanomaterials
[google_news title=”” keyword=”superhydrophobic nanomaterials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Superhydrophobic nanomaterials
- New War Technologies and International Lawon May 2, 2024 at 3:12 am
Some applications of nanomaterials by the military are both powerful and subtle, and have neurological and biological applications: 'devices that can infiltrate electronics and seize control at ...
- Human mini-lungs mimic animal response to nanomaterialson April 26, 2024 at 5:00 pm
Human mini-lungs grown by University of Manchester scientists can mimic the response of animals when exposed to certain nanomaterials. The study at the University’s NanoCell Biology Lab at the ...
- Nanomaterials newson April 25, 2024 at 5:00 pm
Carbon dots (CDs) are an intriguing class of nanomaterials that have attracted a great deal of attention in recent years. These carbon-based materials possess excellent fluorescence properties ...
- Current Nanomaterials and Current Analytical Chemistry have been indexed in Ei Compendexon April 21, 2024 at 5:00 pm
Bentham Science is pleased to announce that two of its journals, Current Nanomaterials and Current Analytical Chemistry, have been officially indexed in the EI Compendex. EI Compendex is one of ...
- Physicists explain--and eliminate--unknown force dragging against water droplets on superhydrophobic surfaceson April 15, 2024 at 5:00 pm
Physicists explain--and eliminate--unknown force dragging against water droplets on superhydrophobic surfaces. ScienceDaily . Retrieved April 30, 2024 from www.sciencedaily.com / releases / 2024 ...
- CHEM.5660 Nanomaterials and Nanostructures (Formerly 84.566)on April 8, 2024 at 8:29 am
Research and technology development in nanoscience and nanotechnology aim at understanding the fundamental nanoscale phenomena, synthesizing, fabricating and imaging nanomaterials and nanostructures, ...
- How to grow inorganic functional nanomaterials—quantum dots—in the nucleus of live cellson April 3, 2024 at 10:01 am
Our study doesn't involve complex genetic modifications; it achieves the target synthesis of inorganic fluorescent nanomaterials in cellular organelles simply by regulating the content and ...
- What are Nanomaterials?on August 31, 2023 at 12:33 am
Nanomaterials are materials with at least one external dimension that measures 100 nanometers (nm) or less or with internal structures measuring 100 nm or less. The nanomaterials that have the same ...
- Nanomaterials Databaseon February 7, 2023 at 3:02 pm
The classification of nanomaterials is based on the number of dimensions of a material, which are outside the nanoscale (
via Bing News