via University of Tsukuba
Researchers from the University of Tsukuba and collaborating partners have used common metals to produce hydrogen under severe oxidation and at high voltage. This work might lower the cost and increase the sustainability of a future fuel
Hydrogen is a promising future fuel—especially if produced from water–but the necessary noble metal catalysts are rare, expensive, and have insufficient reserves. But now, in a study recently published in Advanced Materials, researchers from the University of Tsukuba and collaborating partners have developed catalysts that can overcome the limitations of noble metals.
Hydrogen is a high-energy molecule that can be a renewable future fuel, as burning it only produces water. Unfortunately, most hydrogen is currently sourced from fossil fuel combustion. Hydrogen produced from water would undoubtedly be more environmentally sustainable. However, the metal catalysts required to make this work—such as platinum and iridium—are scarce, costly, and don’t perform as well as needed in the harsh and acidic conditions that increase the energy efficiency. Which metal can be an alternative in acidic media instead? Professor Yoshikazu Ito and coworkers’ solution is a surprising one: use numerous non-noble metals, all at once.
The researchers used high-entropy alloys, which are mixtures consisting of many elements. Whereas some of these alloys can be used to generate large quantities of hydrogen, others undergo a process called oxidation (i.e., passivation) that imparts some corrosion resistance ability to the alloys. Nevertheless, as Professor Ito points out, “it’s apparent that identifying which metals to use in which proportions by conventional bottom-up experiments—i.e., change/add one metal at a time—is quite time-consuming. Our top-down approach not only saves time but also provides invaluable chemical insights into the hydrogen production mechanism.”
Their approach involves first uniformly mixing the nine elements that constitute the alloy, then passivating the surface in acidic media, and finally applying a voltage to facilitate surface structure rearrangements that optimizes the activity of the catalyst. Experiments and theoretical calculations identified the metals that contributed to catalytic activity (e.g., iron, chromium, nickel, cobalt, and manganese) and the metals that contributed to passivation (e.g., titanium, zirconium, niobium, and molybdenum). The high-entropy alloys’ remarkable performance and corrosion resistance were demonstrated in practical water electrolysis experiments. The researchers’ study offers novel possibilities and new perspectives toward replacing extremely scarce noble metals, particularly iridium with a worldwide production of only 7 tonnes per year. With a surge in the use of water electrolyzers globally, the demand for iridium is expected to be 700 kilograms per gigawatt.
“In the experimentally challenging conditions of 0.5 molar sulfuric acid electrolyte, it was necessary to sacrifice some stability to maximize the activity, and vice versa,” explains Ms. Aimi A. H. Tajuddin (1st author, PhD student). “The catalyst exhibited an overvoltage of only hundreds of millivolts at 10 milliamps per square meter in the hydrogen and oxygen evolution reactions. Furthermore, its remarkable performance remained steady during electrochemical cycling tests, equivalent to 3-4 years of endurance in water electrolyzers operated by intermittent renewable energy sources such as solar power.”
This work succeeded in providing a proof-of-concept for a novel, noble-metal-free, economically feasible hydrogen production method from water by using renewable energy. The method costs only a few hundred U.S. dollars per kilogram of catalyst and is suitable for mass-production. The application of high-entropy alloys by the researchers will allow for the production of hydrogen, batteries, and other products that would otherwise require expensive metals.
Original Article: Non-noble Catalyst for Hydrogen Production
More from: University of Tsukuba
The Latest Updates from Bing News
Go deeper with Bing News on:
Hydrogen production
- Mitsubishi Heavy Industries begins testing solid oxide electrolyzer cell for hydrogen production
The SOEC test module includes multiple cartridges of 500 cell stacks bundled together. MHI said results will be used to support higher output and capacity.
- Really Cold Hydrogen Could Bring Driving Range Parity with Diesel
The time it takes to fuel a hydrogen-powered fuel cell truck is already on par with diesel. But there is still a yawning gap when it comes to comparable driving range.
- California Welcomes First Big-Rig Hydrogen Fuel Station in U.S.
The country’s first commercial hydrogen fuel station for big-rig trucks is up and running at the Port of Oakland, a step toward what hydrogen proponents see as a clean new future for long-haul ...
- Custom-made catalyst leads to longer-lasting and more sustainable green hydrogen production
Researchers led by Ryuhei Nakamura at the RIKEN Center for Sustainable Resource Science (CSRS) in Japan have improved on their green and sustainable method of extracting hydrogen from water by using a ...
- Air Products plans Canadian hydrogen network
Industrial gas supplier to build series of permanent, commercial-scale, multi-modal hydrogen refueling stations in Alberta, with the first one slated to come online in 2025 ...
Go deeper with Bing News on:
Hydrogen batteries
- Where Will Plug Power Stock Be in 3 Years?
Plug Power (NASDAQ: PLUG), a developer of hydrogen fuel cell systems, was one of the biggest boom and bust stories of the dot-com bubble more than two decades ago. The company went public at a reverse ...
- Really Cold Hydrogen Could Bring Driving Range Parity with Diesel
The time it takes to fuel a hydrogen-powered fuel cell truck is already on par with diesel. But there is still a yawning gap when it comes to comparable driving range.
- NGK Insulators to supply NAS batteries for large-scale green hydrogen production in Germany
NGK Insulators is to supply NAS batteries for a large-scale green hydrogen production project in Germany. It is being developed by HH2E, a German green ...
- The first big-rig hydrogen fuel station in the US opens in California
And only two technologies are available to achieve that goal: battery electric trucks and hydrogen fuel-cell trucks. “We believe a good portion of those will be hydrogen vehicles,” said Matt Miyasato, ...
- Plug Power within months of getting third green hydrogen factory running
COLONIE – Fuel cell maker Plug Power says it has completed the ramp up of its two first green hydrogen plants in Tennessee and Georgia, with its third plant expected to be completed in the third ...