This programmable balloon could pave the way for new shape-morphing devices (Image courtesy of the Bertoldi Lab/Harvard SEAS)
Kirigami balloons could be used in medical devices, soft robotics
Balloon shaping isn’t just for kids anymore. A team of researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) has designed materials that can control and mold a balloon into pre-programmed shapes. The system uses kirigami sheets — thin sheets of material with periodic cuts — embedded into an inflatable device. As the balloon expands, the cuts in the kirigami sheet guide the growth, permitting expansion in some places and constricting it in others. The researchers were able to control the expansion not only globally to make large-scale shapes, but locally to generate small features.
The team also developed an inverse design strategy, an algorithm that finds the optimum design for the kirigami inflatable device that will mimic a target shape upon inflation.
“This work provides a new platform for shape-morphing devices that could support the design of innovative medical tools, actuators and reconfigurable structures,” said Katia Bertoldi, the William and Ami Kuan Danoff Professor of Applied Mechanics at SEAS and senior author of the study.
The research is published in Advanced Materials.
An individual cut on a kirigami sheet contributes to the larger shape of the balloon like a pixel helps form an image on a 2D surface. The researchers found that by tuning the geometric parameters of these cuts, they could control and embed complex shapes.
“By only varying two parameters of the pixels, we can program all different kinds of crazy shapes into the kirigami balloons, including bends, twists and expansions,” said Antonio Elia Forte, a postdoctoral fellow at SEAS and co-first author of the study. “Our strategy allows us to automatically design a morphable balloon starting from the shape that you need. It’s a bottom-up approach that for the first time harnesses the elasticity of the material, not only kinematic.”
Using these parameters, the researchers developed an inverse algorithm that could mix and match pixels of different width and height, or delete certain pixels altogether, to achieve the desired shape. By manipulating the parameters of individual pixels, the researchers were able to tune shapes at a significantly smaller scale. To demonstrate this, they programmed a balloon to mimic the shape of a squash (the experiments took place around Halloween) complete with the characteristic bumps and ridges along the side.
“By controlling the expansion at every level of the kirigami balloon, we can reproduce a variety of target shapes,” Lishuai Jin, a graduate student at SEAS and co-first author of the paper.
The researchers also made kirigami balloons in the shapes of calabash gourds, hooks and vases, demonstrating that the approach is general enough to mimic any given shape.
Next, the researchers aim to use these kirigami balloons as shape-changing actuators for soft robots. The work lays a foundation for the design of structures at multiple scales: from micro minimally-invasive surgical devices to macro structures for space exploration.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Programmable balloon
- Attend the Albuquerque International Balloon Fiesta
Although Albuquerque's weather is usually mild, inclement weather may mean the balloons can't fly. Allowing yourself backup days should ensure you get to see the big show. – Ashley M.
- How Much Does It Cost To Install A Thermostat?
Installing one thermostat will be less expensive than installing multiple units. For manual and programmable thermostats, multiple units must be installed for zoning. With smart thermostats ...
- Inside NWS Wilmington: Weather balloon launches
Twice a day, right up the road at the National Weather Service in Wilmington, a balloon filled with hydrogen gas is equipped with a radiosonde and is launched into the upper atmosphere.
- HALO Space unveils capsule design for stratospheric space 'glamping'
LONDON — Stratospheric balloon company HALO Space plans to offer aspiring space travelers the space tourism equivalent of glamping. Instead of tight space suits and stomach-churning G-forces ...
- The Balloon
The balloon, beginning at a point on Fourteenth Street, the exact location of which I cannot reveal, expanded northward all one night, while people were sleeping, until it reached the Park.
Go deeper with Google Headlines on:
Programmable balloon
[google_news title=”” keyword=”programmable balloon” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Soft robotics
- Soft robotic nerve cuffs could revolutionize treatment of neurological conditions
Researchers have developed tiny, flexible devices that can wrap around individual nerve fibres without damaging them.
- China’s S1 robot impresses with its ‘human-like’ speed and precision
In a video released by the firm, its humanoid S1 is seen doing household tasks at an unprecedented pace, which marks a significant advancement for a robot. The firm claims that S1 can perform ...
- Underwater robot pioneers new energy-efficient buoyancy control
A remotely operated underwater robot built by a team of Rice University engineering students pioneers a new way to control buoyancy via water-splitting fuel cells. The device, designed and constructed ...
- This robot can predict a smile before it happens
STORY: This AI-integrated robotic face can predict a smile before it happens.It's called Emo and it can anticipate and mimic human facial expressions.Engineers at Columbia University’s Creative ...
- 3D Printed Soft Skin Pads Offer Enhanced Safety and Usability in Robotics
Researchers at the University of Illinois have leveraged 3D printing to develop soft skin pads to enhance safety and usability in robotics.
Go deeper with Google Headlines on:
Soft robotics
[google_news title=”” keyword=”soft robotics” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
