A perovskite solar module the size of an A4 sheet of paper, which is nearly six times bigger than 10×10 cm2 modules of that type reported before, has been developed by Swansea University researchers, by using simple and low-cost printing techniques.
The breakthrough shows that the technology works at a larger scale, not just in the lab, which is crucial for encouraging industry to take it up.
Each of the many individual cells forming the module is made of perovskite, a material of increasing interest to solar researchers as it can be made more easily and cheaply than silicon, the most commonly-used material for solar cells.
Perovskite solar cells have also proved to be highly efficient, with scores for power conversion efficiency (PCE) – the amount of light striking a cell that it converts into electricity – as high as 22% on small lab samples.
The team work for the SPECIFIC Innovation and Knowledge Centre led by Swansea University. They used an existing type of cell, a Carbon Perovskite Solar Cell (C-PSC), made of different layers – titania, zirconia and carbon on top – which are all printable.
Though their efficiency is lower than other perovskite cell types, C-PSCs do not degrade as quickly, having already proved over 1 year’s stable operation under illumination.
The Swansea team’s breakthrough comes from the optimisation of the printing process on glass substrates as large as an A4 sheet of paper. They ensured the patterned layers were perfectly aligned through a method called registration, well-known in the printing industry.
The entire fabrication process was carried out in air, at ambient conditions, without requiring the costly high-vacuum processes which are needed for silicon manufacture.
The Swansea team achieved good performance for their modules:
– up to 6.3% power conversion efficiency (PCE) when assessed against the “1 sun” standard, i.e. full simulated sunlight. This is world-leading for a C-PSC device of this size.
– 11% PCE at 200 lux, roughly equivalent to light levels in an average living room
– 18% PCE at 1000 lux, equating to light levels in an average supermarket.
The high efficiency ratings under indoor lighting conditions demonstrate that this technology has potential not only for energy generation outdoors but also for powering small electronic devices – such as smartphones and sensors – indoors.
Dr Francesca De Rossi, technology transfer fellow at Swansea University’s SPECIFIC Innovation and Knowledge Centre, said:
“Our work shows that perovskite solar cells can deliver good performance even when produced on a larger scale than reported so far within the scientific community. This is vital in making it economical and appealing for industry to manufacture them.
The key to our success was the screen printing process. We optimised this to avoid defects caused by printing such large areas. Accurate registration of layers and patterning the blocking layer helped improve connections between cells, boosting overall performance.
There is more work still to do, for example on increasing the active area – the percentage of the substrate surface that is actually used for producing power. We are already working on it.
But this is an important breakthrough by our team, which can help pave the way for the next generation of solar cells”
Learn more: Supersizing perovskite solar cells: researchers show that technology works at larger scale
The Latest on: Perovskite solar cell
[google_news title=”” keyword=”perovskite solar cell” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Perovskite solar cell
- Low-energy process for high-performance solar cellson May 7, 2024 at 3:17 pm
Solar energy offers one solution, with scientists devising ever more efficient materials for capturing sunlight. Perovskite solar cells have emerged as a promising alternative to conventional, silicon ...
- UCSB pioneers a low-energy process for high-performance solar cellson May 6, 2024 at 8:05 am
Researchers at UC Santa Barbara developed a way to make perovskite films at room temperature. This material has emerged as a promising alternative to conventional, silicon solar cells.
- NREL interactive chart of solar cell efficiency now including ‘hybrid tandems’on May 6, 2024 at 4:09 am
The new cell category includes perovskite/silicon, perovskite/CIGS, III-V/silicon and perovskite/organic tandem PV devices. It will list the absolute record efficiency for all-perovskite, two-terminal ...
- Improving perovskite solar cell performance with conductive adhesive inkon May 6, 2024 at 3:23 am
Conceived by researchers from Iran, the new conductive adhesive ink is made of polymethyl methacrylate (PMMA) and is used as an interlayer between the cell's hole transport layer and carbon foil. It ...
- IIT Roorkee’s Perovskite Start-Up Wins IOCL Start-Up Challenge Grant for Advancing Solar Window Technologyon May 5, 2024 at 9:32 pm
A Collaborative Journey of Innovation at IIT Roorkee Revolutionizing Solar Energy with Innovative Window Technology Transforming Buildings into Powerhouses: The Rise of Solar Windows Pioneering the ...
- Researchers pioneer a low-energy process for high-performance solar cellson May 5, 2024 at 5:00 pm
Solar energy offers one solution, with scientists devising ever more efficient materials for capturing sunlight. Perovskite solar cells have emerged as a promising alternative to conventional, silicon ...
- Perovskite Solar Cells: What Are They & How Do They Work?on May 4, 2024 at 7:15 am
This renewable energy technology has shown huge potential for over a decade, if only a few large obstacles could be overcome on the road to market.
- Can perovskite solar cells outshine silicon and revolutionize solar energy?on May 3, 2024 at 3:06 am
For decades, the familiar blue rectangles of silicon solar panels have dominated rooftops across the globe with the increasing adoption of solar energy. While these panels have become a reliable ...
- New material for perovskite solar cells can improve their stability and efficiencyon May 2, 2024 at 12:35 pm
A team of chemists from Kaunas University of Technology (KTU), Lithuania developed a new material for perovskite solar cells. After polymerisation, it can be used as a hole transporting layer in both ...
via Bing News