A new type of material generates electrical current very efficiently from temperature differences. This allows sensors and small processors to supply themselves with energy wirelessly.
Thermoelectric materials can convert heat into electrical energy. This is due to the so-called Seebeck effect: If there is a temperature difference between the two ends of such a material, electrical voltage can be generated and current can start to flow. The amount of electrical energy that can be generated at a given temperature difference is measured by the so-called ZT value: The higher the ZT value of a material, the better its thermoelectric properties.
The best thermoelectrics to date were measured at ZT values of around 2.5 to 2.8. Scientists at TU Wien (Vienna) have now succeeded in developing a completely new material with a ZT value of 5 to 6. It is a thin layer of iron, vanadium, tungsten and aluminium applied to a silicon crystal.
The new material is so effective that it could be used to provide energy for sensors or even small computer processors. Instead of connecting small electrical devices to cables, they could generate their own electricity from temperature differences. The new material has now been presented in the journal “Nature”.
Electricity and Temperature
“A good thermoelectric material must show a strong Seebeck effect, and it has to meet two important requirements that are difficult to reconcile,” says Prof. Ernst Bauer from the Institute of Solid State Physics at TU Wien. “On the one hand, it should conduct electricity as well as possible; on the other hand, it should transport heat as poorly as possible. This is a challenge because electrical conductivity and thermal conductivity are usually closely related.”
At the Christian Doppler Laboratory for Thermoelectricity, which Ernst Bauer established at TU Wien in 2013, different thermoelectric materials for different applications have been studied over the last few years. This research has now led to the discovery of a particularly remarkable material – a combination of iron, vanadium, tungsten and aluminium.
“The atoms in this material are usually arranged in a strictly regular pattern in a so-called face-centered cubic lattice,” says Ernst Bauer. “The distance between two iron atoms is always the same, and the same is true for the other types of atoms. The whole crystal is therefore completely regular”.
However, when a thin layer of the material is applied to silicon, something amazing happens: the structure changes radically. Although the atoms still form a cubic pattern, they are now arranged in a space-centered structure, and the distribution of the different types of atoms becomes completely random. “Two iron atoms may sit next to each other, the places next to them may be occupied by vanadium or aluminum, and there is no longer any rule that dictates where the next iron atom is to be found in the crystal,” explains Bauer.
This mixture of regularity and irregularity of the atomic arrangement also changes the electronic structure, which determines how electrons move in the solid. “The electrical charge moves through the material in a special way, so that it is protected from scattering processes. The portions of charge travelling through the material are referred to as Weyl Fermions,” says Ernst Bauer. In this way, a very low electrical resistance is achieved.
Lattice vibrations, on the other hand, which transport heat from places of high temperature to places of low temperature, are inhibited by the irregularities in the crystal structure. Therefore, thermal conductivity decreases. This is important if electrical energy is to be generated permanently from a temperature difference – because if temperature differences could equilibrate very quickly and the entire material would soon have the same temperature everywhere, the thermoelectric effect would come to a standstill.
Electricity for the Internet of Things
“Of course, such a thin layer cannot generate a particularly large amount of energy, but it has the advantage of being extremely compact and adaptable,” says Ernst Bauer. “We want to use it to provide energy for sensors and small electronic applications.” The demand for such small-scale generators is growing quickly: In the “Internet of Things”, more and more devices are linked together online so that they automatically coordinate their behavior with each other. This is particularly promising for future production plants, where one machine has to react dynamically to another.
“If you need a large number of sensors in a factory, you can’t wire all of them together. It’s much smarter for the sensors to be able to generate their own power using a small thermoelectric device,” says Bauer.
Learn more: New Material Breaks World Record Turning Heat into Electricity
The Latest on: Thermoelectric materials
- Smart Insulating Material Developed for Real-Time Detection of Thermal Runaway in Batterieson April 22, 2024 at 10:30 pm
Professor Im Sang-hyuk’s group of the Department of Chemical and Biological Engineering developed a porous thermoelectric material featuring excellent insulation performance combined with energy ...
- Silicon goes thermoelectricon April 10, 2024 at 5:56 am
The ability of thermoelectric materials to convert heat into electricity could have many applications, including power generation and solid-state refrigeration. In particular, the fact that the ...
- Polaron interfacial entropy as a route to high thermoelectric performance in DAE-doped PEDOT:PSS filmson April 2, 2024 at 4:59 pm
Among organic thermoelectric materials, PEDOT:PSS (poly(3,4-ethylenedioxythiophene-poly(4-styrenesulfonate)) thin films have received extensive attention but suffer from low Seebeck coefficients ...
- Researchers develop a thermoelectric material with optimal cost, efficiency and flexibilityon March 29, 2024 at 9:19 am
Despite ongoing research and development on various types of bulk and thin-film thermoelectric materials and devices, owing to the advantages of thermoelectric technology, the chronic issue of ...
- DGIST develops thermoelectric material with optimal cost, efficiency, and flexibility! Pioneering a new era in eco-friendly thermoelectric technologyon March 27, 2024 at 5:01 pm
Despite ongoing research and development on various types of bulk and thin-film thermoelectric materials and devices, owing to the advantages of thermoelectric technology, the chronic issue of ...
- Rectifying AI's usage in the quest for thermoelectric materialson March 25, 2024 at 1:32 pm
Rectifying AI's usage in the quest for thermoelectric materials. ScienceDaily . Retrieved April 23, 2024 from www.sciencedaily.com / releases / 2024 / 03 / 240325114149.htm ...
- Rectifying AI's usage in the quest for thermoelectric materialson March 25, 2024 at 7:55 am
A team of researchers has used AI to identify a thermoelectric material with favorable values. The group was able to navigate AI's conventional pitfalls and big data challenges, offering a prime ...
- Thermoelectric Power Generationon September 24, 2023 at 10:20 am
Thermoelectric materials can be employed to develop thermoelectric power generation modules used to convert heat flow into electricity without any moving parts. Increasing the efficiency of these ...
- New Approach for ZT Enhancement in Thermoelectric Materialson April 19, 2023 at 5:00 pm
Image Credit: Tokyo Institute of Technology. A thermoelectric material with a high conversion efficiency (ZT) is required for efficient conversion. So far, only heavy metals such as lead, bismuth, and ...
via Bing News
The Latest on: Electricity for the Internet of Things
- They Found Out Their Lazy Neighbor Was Stealing Their Electricity, So They Made Sure They Got Some Shocking Revengeon April 25, 2024 at 12:38 am
Well, this is a new one… I’ve heard of neighbors stealing a lot of things from each other, but electricity? It happened! And this person dealt with the situation brilliantly! Check out what happened ...
- The future of clean energy hinges on cybersecurityon April 23, 2024 at 11:00 am
In the long term, the energy sector needs coordinated, long-term collaboration to ensure that cybersecurity is a core tenet of clean energy. Close and frequent collaboration between the cybersecurity ...
- Internet data centers are fueling drive to old power source: Coalon April 17, 2024 at 3:05 am
Virginia data centers that process nearly 70 percent of global digital traffic need more electricity. Coal-fired power plants in neighboring states are going to provide it.
- Why This Document Is More Important Than Your Electricity Rateon April 16, 2024 at 2:42 am
When shopping for electricity, the advertised rate isn't necessarily what you'll pay. The electricity facts label tells you what each plan will really cost you.
- New Device Gathers, Stores Electricity in Remote Settingson April 10, 2024 at 10:57 am
Pyroelectrochemical cell harnesses changes in ambient temperature to self-charge, has potential for IoT applications ...
- New device gathers, stores electricity in remote settingson April 8, 2024 at 5:00 pm
Systems known as the "Internet of Things" (IoT), hold much potential ... How do you power these devices in situations where and when reliable electrical sources are not practically available?
- Gree Electric Appliances Inc of Zhuhai in internet of things: theme innovation strategyon March 14, 2024 at 5:37 am
Gree Electric Appliances Inc of Zhuhai grant share with internet of things as a theme is 36% in Q4 2023. Grant share is based on the ratio of number of grants to total number of patents. The patent ...
- Scientists invent dirt-fuelled power source that ‘lasts forever’on January 16, 2024 at 8:25 am
as well as remote devices in the Internet of Things (IoT). The technology works by generating electricity from naturally-occurring bacteria within the soil, offering a sustainable and renewable ...
- Heating, electricity and internet: how to explain invisible costs to your childon August 21, 2023 at 2:02 am
After all, you pay for them at the till. But how can you explain the costs of heating, electricity and internet to your children? 3 min read Even small children learn that we need to spend money on a ...
- MS in the Internet of Thingson December 22, 2021 at 7:10 am
The master's in IoT requires a total of 45 credits; 12 credits in Internet of Things coursework; 21 credits of electrical engineering elective courses; and the remaining 12 credits can be completed ...
via Bing News