Integrating the product on top of a Si cell can potentially improve solar cell efficiency to as much as 40 % – which would mean a doubling of efficiency when compared to today’s commercial Si solar cells
via MIT
A new method using nanowires can make solar panels much more efficient and much cheaper than today.
A research group at the Norwegian University of Science and Technology (NTNU) has developed a method for making an ultra-high material efficient solar cell using semiconductor nanowires. If this is placed on top of a traditional silicon-based solar cell, it could potentially double the efficiency of today’s Si solar cells at low cost.
“We have a new method of using gallium arsenide (GaAs) material in a very effective way through nanostructuring, so we can make solar cells much more efficient using only a tiny fraction of the material that is normally used,” says Anjan Mukherjee, a PhD candidate at the Department of Electronic Systems. Mukherjee is the main developer of the technique.
Gallium arsenide (GaAs) is the best material for making high efficiency solar cells because of its extraordinary light absorption and electrical characteristics. It is commonly used to make solar panels mainly for use in space.
However, high-quality GaAs solar cell components are quite expensive to make, which has driven a demand for techniques that can cut the use of the material.
In recent years, it is realized that a nanowire structure can potentially enhance solar cell efficiency compared to standard planar solar cells, even as less material is used.
“Our research group has found a new way to make an ultrahigh power-per-weight ratio solar cell that is more than 10 times more efficient than any other solar cell, by using GaAs in a nanowire structure,” says Helge Weman, a professor at the Department of Electronic Systems at NTNU.
The group’s research has been published in ACS Photonics, a journal from the American Chemical Society.
Pioneering method
GaAs solar cells are most often grown on a thick and expensive GaAs substrate, which leaves little room for reducing costs.
“Our method uses a vertically standing semiconductor nanowire array structure on a cheap and industry-favorable Si platform to grow the nanowires,” Weman said.
This technology can be straightforward and cost-effective.
“The most cost-effective and efficient solution is to grow a dual tandem cell, with a GaAs nanowire cell on the top grown on a bottom Si cell, which avoids the use of an expensive GaAs substrate. We have worked to minimize the cost of growing the top GaAs nanowire cell, because it’s the GaAs fabrication cost that is one of the major issues that is currently holding back the technology,” Weman explains.
“The tiny footprint of the nanowire structure provides an additional benefit, because it allows for high quality in crystals in the nanowire and in the interface with the silicon. This helps improve the solar cell performance,” said Bjorn-Ove Fimland, a professor in the same department.
The development of this technology can be straightforward and cost-effective with appropriate investments and industrial-scale R&D projects.
It can potentially improve solar cell efficiency to as much as 40 % – which would mean a doubling of efficiency.
“We grow the nanowires using a method called MBE (molecular beam epitaxy), which is not a tool that can produce materials at a high volume. However, it’s possible to produce these nanowire-based solar cells at a large scale by using an industrial-scale tool such as MOCVD (metal organic vapor deposition),” Mukherjee said.
Integrating this product on top of a Si cell can potentially improve solar cell efficiency to as much as 40 % – which would mean a doubling of efficiency when compared to today’s commercial Si solar cells.
Suitable for space travel
The researchers say their approach could be adapted so that the nanowires are grown on different substrates, which could open the door to many other applications.
“We are exploring growing this type of light-weight nanowire structure on atomically thin two-dimensional substrates such as graphene. This could open up enormous opportunities to produce light-weight and flexible solar cells that can be used in self-powered drones, micro-satellites and other space applications,” Mukherjee said.
Original Article: New ultra-high material efficient, low-cost solar cells — using nanowires
More from: Norwegian University of Science and Technology
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Solar cell efficiency
- NREL outlines way forward for tandem cells
The vast majority of solar modules in use today rely on a single junction, which is able to absorb only a fraction of the solar spectrum and thus are limited to how efficient they can be. Tandem solar ...
- Scientists make breakthrough while investigating potential of solar panels: 'We figured some other ways to capture more solar energy'
Scientists have been hard at work figuring out ways to make solar cells — the part of the solar panel that actually absorbs light — work more efficiently. However, a group of scientists working on ...
- Is perovskite PV still the future of solar?
So, is perovskite PV still the future of solar? It seems likely to have place among the solutions, at the very least. Applications will get more energy efficient. The need to efficient solar is ...
- Fraunhofer ISE develops 23.4%-efficient PERC solar cells with limited silver amount
A team from Germany’s Fraunhofer Institute for Solar Energy Systems has reduced silver consumption in the fabrication of PERC solar cells by screen-printing ultra-fine metallization lines measuring ...
- Tin halide perovskite solar cell based on new precursor additive achieves 12.22% efficiency
“The additive significantly boosts the open-circuit voltage to 0.94V and realizes a record highest efficiency for the champion device, low open-circuit voltage loss, and negligible hysteresis in the ...
Go deeper with Google Headlines on:
Solar cell efficiency
[google_news title=”” keyword=”solar cell efficiency” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Dual tandem cell
- One-two punch treatment delivers blood cancer knockout
A novel combination of two cancer drugs has shown great potential as a future treatment for patients with acute myeloid leukaemia (AML), one of the most common types of blood cancers. A new study has ...
- NREL outlines way forward for tandem cells
The vast majority of solar modules in use today rely on a single junction, which is able to absorb only a fraction of the solar spectrum and thus are limited to how efficient they can be. Tandem solar ...
- Marines create new monitor job to support dual-military couples
(Cpl. Samantha H. Arrington/Marine Corps) If you get orders to Camp Lejeune, North Carolina, but your spouse has orders to Hawaii, there’s good news: the Marines’ new dual-military monitor may be able ...
- 2024 NFL Offensive Rookie of the Year Odds: Favorites and Best Bets to win top Rookie award, including Caleb Williams
Chicago Bears No. 1 draft pick quarterback Caleb Williams smiles as he listens to reporters during an NFL football news conference in Lake Forest, Ill., Friday, April 26, 2024. If you make a purchase ...
- Bears begin new era by selecting USC’s Caleb Williams with No. 1 pick in 2024 NFL Draft
Since the season ended, the Bears added Keenan Allen – who is coming off of a 108-catch, 1,243-yard season and sixth Pro Bowl selection – in a trade with the Chargers to pair with D.J. Moore (96 ...
Go deeper with Google Headlines on:
Dual tandem cell
[google_news title=”” keyword=”dual tandem cell” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]