Quantifying electric fields in semiconductor devices: The schematic shows electric field distribution in the channel of a GaN transistor; laser beams highlight the second harmonic generation (SHG) nature of the technique
Credit: Yuke Cao
Researchers at the University of Bristol have discovered a method which will allow for faster communication systems and better energy saving electronics.
The breakthrough was made by establishing how to remotely measure the electric field inside a semiconductor device for the first time. A semiconductor is a material, such as Silicon, which can be used in electronic devices to control electric current.
Now, in this new study, published today in Nature Electronics, scientists outline how to precisely quantify this electric field, meaning next generation power and radio frequency electronic devices can be developed which have the potential to be faster, and more reliable, as well as more energy efficient.
Semiconductor device design can be trial and error, though more commonly it is based on a device simulation which then provides the basis for the manufacture of the semiconductor devices for real life applications. When these are new and emerging semiconductor materials, it has often been unknown how accurate and correct these simulations actually are.
Prof Martin Kuball of the University of Bristol’s School of Physics said: “Semiconductors can be made to conduct positive or negative charges and can therefore be designed to modulate and manipulate current. However, these semiconductor devices do not stop with Silicon, there are many others including Gallium Nitride (used in blue LEDs for example). These semiconductor devices, which for instance convert an AC current from a power line into a DC current, result in a loss of energy as waste heat – look at your laptop for example, the power brick is getting warm or even hot. If we could improve efficiency and reduce this waste heat, we will save energy.
“One applies a voltage to an electronic device, and as a result there is an output current used in the application. Inside this electronic device is an electric field which determines how this device works and how long it will be operational and how good its operation is. No one could actually measure this electric field, so fundamental to the device operation. One always relied on simulation which is hard to trust unless you can actually test its accuracy.”
To make good performance and long lasting electronic devices out of these new materials it is important that researchers find the optimal design, where electric fields do not exceed the critical value which would result in their degradation or failure. Experts plan to use newly emerging materials such as Gallium Nitride and Gallium Oxide rather than Silicon, allowing operation at higher frequency and at higher voltages, respectively, so that new circuits are possible which reduce energy loss. This work published by the University of Bristol group will provide an optical tool to enable the direct measurement of electric field within these new devices. This will underpin future efficient power electronics in applications such as solar or wind turbine stations feeding into the national grid, electric cars, trains and planes. Reduced energy loss means societies do not need to produce as much energy in the first place.
Prof Kuball said: “Considering that these devices are operated at higher voltages, this also means electric fields in the devices are higher and this in turn means they can fail easier. The new technique we have developed enables us to quantify electric fields within the devices, allowing accurate calibration of the device simulations that in turn design the electronic devices so the electric fields do not exceed critical limits and fail.”
Prof Kuball and his team plan to work with key industrial stake holders to apply the technique to advance their device technology. Within an academic context, they will engage with partners within the $12M US Department of Energy (DOE) ULTRA centre, they are partnered in, to use this technique to make ultra-wide bandgap device technology a reality, allowing energy savings in excess of 10% across the globe.
“This development helps the UK and the world to develop energy saving semiconductor devices, which is a step towards a carbon neutral society,” he added.
Original Article: Scientists develop energy saving technique which could help pave way for a carbon neutral society
More from: University of Bristol
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Carbon neutral society
- My Take: The state must remain secular, but open to influence
The state must remain secular, neutral, as far as religion is concerned ... that the church ought to also be the conscience of business and every other facet of society. It should be pointing out ...
- Linklogis Releases 2023 ESG Report: Serving RMB19.2 Billion of Transactions Related to Sustainable Supply Chains
This report marks the third ESG report released by Linklogis since its listing. Sustainalytics, an international authoritative ESG rating agency under Morningstar, has rated Linklogis’ ESG ...
- Banks don't talk about the energy AI guzzles. Here's why they should.
Artificial intelligence models are energy hogs. Climate First Bank and UBS are among the very few trying to solve this problem.
- Collaboration for Carbon Neutrality: Swedish Companies Initiate Hydrogen and Biofuel Value Chain
Boliden, Nevel, Skellefteå Kraft, and Sveaskog have entered a letter of intent to conduct a feasibility study for establishing a hydrogen and bi ...
- MOL in Japanese on board carbon capture first
With a deadweight (DWT) of 75,000, this is the largest vessel, in terms of DWT, and the first LR1 tanker to be fitted with a Value Maritime Filtree scrubber and carbon capture unit. Installation is ...
Go deeper with Google Headlines on:
Carbon neutral society
[google_news title=”” keyword=”carbon neutral society” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Ultra-wide bandgap device technology
- How to enable ultra-wideband on Android
Ultra-wideband (UWB for short) isn't as well-known as Bluetooth or Wi-Fi when it comes to wireless tech, but if you don't have it active on your Android phone, you probably should. On devices that ...
- This Week in PowerBites: A Tale of Two Schottkys and Two Rare-Earth-Free Motors
PowerBites offers insights on two new rare earth-free electric-motor architectures, the latest power components, and news that California's grid is now spending significant ...
- Wiim Ultra, a music streamer with a color touchscreen, teased ahead of May launch
LinkPlay is giving fans a sneak peek at the new Wiim Ultra, a network media streamer with a 3.5-inch touchscreen that it will officially launch May 9.
- More Android phones need Ultra Wideband support
Ultra-Wideband, or UWB for short, has been around for a few years, and it’s often advertised as a location tracker for smart tags. The technology lets users trace objects with high precision and ...
- SweGaN announces strategic partnership with RFHIC
The new strategic investment by RFHIC manifests the recognition of SweGaN’s QuanFINE® epitaxial solutions as a standout differentiator among GaN-on-SiC materials available on the market. In ...
Go deeper with Google Headlines on:
Ultra-wide bandgap device technology
[google_news title=”” keyword=”ultra-wide bandgap device technology” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]