Monomers are recovered from a polymer to produce a new product that can be broken down into its building blocks again.
(Graphic: from Wang HS et al, JASC, 2022)
A team of ETH researchers led by Athina Anastasaki have succeeded in breaking down plastic into its molecular building blocks and in recovering over 90 percent of them. A first step towards genuine plastic recycling.
The chemical industry has a long tradition of producing polymers. This involves turning small molecular building blocks into long chains of molecules that bond together. Polymers are the basis of all kinds of everyday plastics, such as PET and polyurethane.
However, while the formation of polymers is well established and well researched, scientists have given little attention to how polymer chains are broken down (a process called depolymerisation) to recover their individual building blocks – monomers. One reason for this is that breaking down polymers is a complex process. Whether a polymer can be broken back down at all into its constituent parts depends on which of the different polymer manufacturing processes were used. Another reason is that the depolymerisation processes used to date require a lot of energy, which has made them economically unviable. Added to this is the fact that recycled polymers are usually only used in the manufacture of low-?value products.
Breaking down polymers is the goal
Athina Anastasaki, Professor of Polymeric Materials at ETH Zurich, wants to change this. She has set herself the goal of producing polymers that can be easily broken down into their building blocks so that they can be fully recycled.
The materials scientist has been able to take a first important step in this direction: A study by her group has just been published in the Journal of the American Chemical Society. In it, Anastasaki and her colleagues show that they can break down certain polymers into their basic building blocks – monomers – and recycle them for use in materials for further applications.
The polymers broken down are polymethacrylates (e.g. Plexi Glass) that were produced using a specific polymerisation technique called reversible addition-?fragmentation chain-?transfer polymerisation – otherwise known as RAFT. This relatively new method, which is now also attracting the interest of industry, produces polymer chains of uniform length.
First success
The researchers at ETH Zurich have succeeded in recovering up to 92 percent of the building blocks of polymethacrylates without adding a catalyst that would enable or accelerate the reaction. “Our method could conceivably be developed even further to involve the use of a catalyst. This could increase the amount recovered even more,” says Anastasaki.
The chemical group present at the end of a polymer chain is crucial for the polymer’s breakdown. By heating the polymer solvent mixture to 120°C, the researchers created what are referred to as “radicals” at the end of a polymethacrylate chain, which triggered the depolymerisation. Researchers at the Australian National University in Canberra were able to confirm the results mathematically.
Producing the same or a different product
According to Anastasaki, the building blocks recovered in this way can be used to produce the same polymer or a completely different product – an insoluble hydrogel that can also be broken down into its monomers. The newly created products are of similar quality to the original ones. This is in contrast to previous products made from recycled polymers.
But there is a catch: “Products made with RAFT polymerisation are more expensive than conventional polymers,” says Anastasaki. To address this drawback, she and her group are already working on expanding the method for large-?scale applications, which will make it more competitive and the resulting products cheaper. The researchers also aim to increase the amount retrieved and recover all the building blocks of a polymer.
The materials scientist is also researching whether other polymers can be depolymerised. She is particularly interested in polystyrene, a widespread, low-?cost plastic that is used in many areas of everyday life (Styrofoam).
Method will not resolve the plastics problem short term
Even if this new method raises hopes of solving mankind’s plastic waste problem, Anastasaki dismisses the idea for the time being. There is no quick fix to the problem. She goes on to say. “It will take a lot of time and research before the process is established in the chemical industry.” Nor will it get rid of plastic waste: today’s polymers cannot be broken down in this way. Some new, suitable polymers have to come into circulation before their building blocks can be recovered. But the method has one advantage: no new chemical plants are needed for its introduction and use.
“We are only at the beginning of our research into depolymerisation. There are over 30,000 studies on developing new polymerisation strategies, with only a handful of them addressing the subject of monomer recovery,” says Anastasaki.
Original Article: Breaking down plastic into its constituent parts
More from: ETH Zürich | Australian National University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Genuine plastic recycling
- EIA: “Plastic production emissions could be halved in 25 years”
London based Environmental Investigation Agency (EIA) has announced that greenhouse gas emissions caused by plastic production “could be halved in 25 years if there is a freeze or reduction in the ...
- Chase Plastics highlights ‘true cost of Plastic Packaging Tax’ for manufacturers
Chase Plastics has published a Cost Comparison Guide which aims to encourage more use of recycled plastic by highlighting breakeven price points for recycled content required to avoid the Plastic ...
- An ambitious Global Plastics Treaty could halve plastic production emissions, EIA analysis finds
Planet-threatening greenhouse gas emissions due to plastics production could be halved over the next 25 years if there is a freeze and reduction in the production of plastic polymers.
- Stop looking away from recycling
A new paper released by Australia’s peak recycling body is calling for industry reforms as industry and government continue to put product stewardship responsibility on producers.
- Sustainable Infrastructure Systems tackles plastics waste crisis
An Adelaide manufacturing company believes it can form part of the solution to the country’s plastic waste crisis by converting discarded plastics into lightweight structures, including bridges and ...
Go deeper with Google Headlines on:
Genuine plastic recycling
[google_news title=”” keyword=”genuine plastic recycling” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Breaking down polymers
- Fly Fishing and Our Environment: PFAS Are Being Canceled, Why Is This a Good Thing?
PFAS are common in fly fishing apparel and gear. Why are they being prohibited by law? As of January 1, 2025, California will prohibit the manufacture, sale and distribution of all textiles that ...
- IRIS beamline at BESSY II gets a new nanospectroscopy end station
The IRIS infrared beamline at the BESSY II storage ring now offers a fourth option for characterizing materials, cells and even molecules on different length scales. The team has extended the IRIS ...
- 4 Diversified Chemical Stocks to Gain From Demand Rebound
KRO are well-placed to benefit from the rebound in demand. Strategic measures, including operating cost reductions and aggressive price hikes, are also helping these companies to tide over the ...
- Creating quantum sensors - chemistry meets physics
Ben King didn’t set out to create a long-sought after material to be used in quantum sensing devices, but life, like quantum science, can be weird. King, a professor in chemistry at the University of ...
- America's plastic catastrophe
America generates 40 million tons of plastic waste a year — and it can't be recycled.
Go deeper with Google Headlines on:
Breaking down polymers
[google_news title=”” keyword=”breaking down polymers” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]