Researchers find an ultrathin layer of aluminum oxide, though solid, can flow like a liquid instead of cracking.
Researchers have found that a solid oxide protective coating for metals can, when applied in sufficiently thin layers, deform as if it were a liquid, filling any cracks and gaps as they form.
The thin coating layer should be especially useful to prevent leakage of tiny molecules that can penetrate through most materials, such as hydrogen gas that could be used to power fuel-cell cars, or the radioactive tritium (a heavy form of hydrogen) that forms inside the cores of nuclear power plants.
Most metals, with the notable exception of gold, tend to oxidize when exposed to air and water. This reaction, which produces rust on iron, tarnish on silver, and verdigris on copper or brass, can weaken the metal over time and lead to cracks or structural failure. But there are three known elements that produce an oxide that can actually serve as a protective barrier to prevent any further oxidation: aluminum oxide, chromium oxide, and silicon dioxide.
Ju Li, a professor of nuclear engineering and science and of materials science and engineering at MIT and senior author of a paper describing the new finding, says “we were trying to understand why aluminum oxide and silicon dioxide are special oxides that give excellent corrosion resistance.” The paper appears in the journal Nano Letters.
A thin layer of aluminum oxide separates oxygen gas (right) and two aluminum metal grains (left). As the material is stretched, the oxide layer elongates.
The team, led by MIT graduate student Yang Yang, used highly specialized instruments to observe in detail the surface of metals coated with these “special” oxides to see what happens when they are exposed to an oxygen environment and placed under stress. While most transmission electron microscopes (TEMs) require that samples be studied in a high vacuum, the team used a modified version called an environmental TEM (E-TEM) that allows the sample to be studied in the presence of gases or liquids of interest. The device was used to study the process that can lead to a type of failure known as stress corrosion cracking.
Metals under stress from pressure inside a reactor vessel and exposed to an environment of superheated steam can corrode quickly if not protected. Even with a solid protective layer, cracks can form that allow the oxygen to penetrate to the bare metal surface, where it can then penetrate into interfaces between the metal grains that make up a bulk metal material, causing further corrosion that can penetrate deeper and lead to structural failure. “We want an oxide that is liquid-like and crack-resistant,” Yang says.
It turns out that the old standby coating material, aluminum oxide, can have just that liquid-like flowing behavior, even at room temperature, if it is made into a thin enough layer, about 2 to 3 nanometers (billionths of a meter) thick.
“Traditionally, people think that the metal oxide would be brittle” and subject to cracking, Yang says, explaining that no one had demonstrated otherwise because it is so difficult to observe the material’s behavior under realistic conditions. That’s where the specialized E-TEM setup at Brookhaven National Laboratory, one of only about 10 such devices in the world, came into play. “No one had ever observed how it deforms at room temperature,” Yang says.
“For the first time, we’ve observed this at nearly atomic resolution,” says Li. This approach demonstrated that an aluminum oxide layer, normally so brittle it would shatter under stress, when made exceedingly thin is almost as deformable as a comparably thin layer of aluminum metal — a layer much thinner than aluminum foil. When the aluminum oxide is coated onto a surface of a bulk piece of aluminum, the liquid-like flow “keeps the aluminum covered” with its protective layer, Li reports.
The researchers demonstrated inside the E-TEM that the aluminum with its oxide coating could be stretched to more than double its length without causing any cracks to open up, Li says. The oxide “forms a very uniform conformal layer that protects the surface, with no grain boundaries or cracks,” even under the strain of that stretching, he says. Technically, the material is a kind of glass, but it moves like a liquid and fully coats the surface as long as it is thin enough.
“People can’t imagine that a metal oxide can be ductile,” Yang says, referring to a metal’s ability to be deformed, such as being stretched out into a thin wire. For example, sapphire is a form of exactly the same material, aluminum oxide, but its bulk crystalline form makes it a very strong but brittle material.
The self-healing coating could have many potential applications, Li says, noting the advantage of its smooth, continuous surface without cracks or grain boundaries that could penetrate into the material.
Learn more: Self-healing metal oxides could protect against corrosion
The Latest on: Self-healing materials
[google_news title=”” keyword=”self-healing materials” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Self-healing materials
- Your ‘Mother Wound’ Can Make It Hard To Form Healthy Relationships as an Adult—Here’s How To Copeon May 8, 2024 at 3:30 pm
In an effort to avoid being like their mother altogether, a person might also overcorrect. For example, if someone wants to avoid being weak, a trait they associate with their mother, they might work ...
- A month of healing — just what we needon May 8, 2024 at 1:40 pm
Healing is the special power of the new Jewish month of Iyar, which begins tonight at sundown. The word Iyar (אייר) is a “roshei teivos” (first letter acronym) of “אני יי רופאך,” which means “I am God ...
- Believe it or not! Potholes can now be self healedon May 8, 2024 at 3:15 am
The infused bitumen in asphalt deteriorates, leading to erosion of the top surface and formations of cracks over a period of time.
- Ape Treating His Wound Using Medicinal Plant is a World First for a Wild Animalon May 5, 2024 at 11:26 am
An ape was seen treating a wound using a medicinal plant for the first time. Days later the Sumatran orangutan had successfully healed it.
- Self-healing, magical highways to resolve pothole situation in India: NHAI's prospective plan explainedon May 5, 2024 at 2:08 am
NHAI explores self-healing materials with steel fibers and bitumen to reduce potholes, extend road life, and lower maintenance costs in India. Stay up ...
- Building Roads Of Tomorrow: NHAI To Build Self-Repairing Highways To Combat Potholeson May 1, 2024 at 6:55 am
The National Highways Authority of India (NHAI) is spearheading efforts to introduce roads that possess the remarkable ability to repair themselves ...
- Self-Healing Materials: Pioneering a New Era of Resilience and Durabilityon April 30, 2024 at 12:05 pm
What are Self-Healing Materials? Self-healing materials are a class of advanced materials that have the ability to autonomously repair damage and restore their original properties without external ...
- What are self-healing roads that India may introduce to tackle the big pothole problem?on April 29, 2024 at 4:56 am
India has a serious problem of potholes. In 2022, there were 4,446 accidents due to these craters, which led to the deaths of 1,856 people. Now, to tackle this menace, the National Highways Authority ...
- Self-Healing Materials Market Estimated to Reach US$ 15.57 billion by 2032, Fueled by Infrastructure Surge in Developing Economieson April 26, 2024 at 8:03 am
The self-healing materials industry size estimated at US$ 1.61 billion in 2022 is anticipated to grow at a CAGR of 25.5% from 2022 to 2032. Materials that are capable of self-healing are stimulated by ...
via Bing News