A surprising low-tech tool—Scotch Magic tape—was one of the keys to the discovery
An international group of researchers from the University of Minnesota, Argonne National Laboratory and Seoul National University have discovered a groundbreaking technique in manufacturing nanostructures that has the potential to make electrical and optical devices smaller and better than ever before. A surprising low-tech tool of Scotch Magic tape ended up being one of the keys to the discovery.
The research is published today in Nature Communications, an international online research journal.
Combining several standard nanofabrication techniques—with the final addition of the Scotch Magic tape—researchers at the University of Minnesota created extremely thin gaps through a layer of metal and patterned these tiny gaps over the entire surface of a four-inch silicon wafer. The smallest gaps were only one nanometer wide, much smaller than most researchers have been able to achieve. In addition, the widths of the gaps could be controlled on the atomic level. This work provides the basis for producing new and better nanostructures that are at the core of advanced electronic and optical devices.
One of the potential uses of nanometer-scale gaps in metal layers is to squeeze light into spaces much smaller than is otherwise possible. Collaborators at Seoul National University, led by Prof. Dai-Sik Kim, and Argonne National Laboratory, led by Dr. Matthew Pelton, showed that light could readily be squeezed through these gaps, even though the gaps are hundreds or even thousands of times smaller than the wavelength of the light used. Researchers are very interested in forcing light into small spaces because this is a way of boosting the intensity of the light. The collaborators found that the intensity inside the gaps is increased by as much as 600 million times.
“Our technology, called atomic layer lithography, has the potential to create ultra-small sensors with increased sensitivity and also enable new and exciting experiments at the nanoscale like we’ve never been able to do before,” said Sang-Hyun Oh, one of the lead researchers on the study and a professor of electrical and computer engineering in the University of Minnesota’s College of Science and Engineering. “This research also provides the basis for future studies to improve electronic and photonic devices.”
One of the most surprising outcomes of the research is that Scotch Magic tape was one of the keys to the discovery. Etching one-nanometer-wide gaps into metals is not feasible with existing tools. Instead, the researchers in Oh’s team constructed the nano-gaps by layering atomic-scale thin films on the sides of metal patterns and then capping the structure with another metal layer. No expensive patterning tools were needed to form the gaps this way, but it was challenging to remove the excess metals on top and expose the tiny gaps. During a frustrating struggle of trying to find a way to remove the metal films, University of Minnesota Ph.D. student and lead author of the study Xiaoshu Chen found that by using simple Scotch Magic tape, the excess metals could be easily removed.
“The Scotch tape works nicely, which was unexpected,” said Oh. “Our technique is so simple yet can create uniform and ultra-small gaps like we’ve never been able to do before. We hope that it will rapidly be taken up by many researchers.”
The Latest Bing News on:
Nanofabrication
- Stanford Scientists Develop Revolutionary AR Headset: Holographic Tech Turns Ordinary Glasses Into 3D Wonderlandon May 11, 2024 at 11:23 am
Engineers at Stanford claim to have made a significant advancement in augmented reality by combining developments in display technologies, holographic imaging, and artificial intelligence. Researchers ...
- From the Publisher: Let’s just call it NanoFab-ulouson May 10, 2024 at 12:55 pm
That was evident at Friday’s formal grand-opening of the university’s Nanofabrication Facility, a 2,000-square-foot center on the third floor of one of the newer campus buildings. It is Northern ...
- Q&A: How advanced chip packaging can help redesign the future of semiconductorson May 8, 2024 at 10:28 am
The phrase "advanced chip packaging" might conjure images of a fancy Pringles can. For those who manufacture semiconductors—also known as integrated circuits, chips or microchips—it represents a new ...
- George Mason officials, state leaders celebrate $3.75M Nanofabrication Facility at Manassas campuson May 6, 2024 at 2:24 pm
Local and state leaders, alongside George Mason University faculty and partners, cut the ribbon at the newly constructed, 1,946-square-foot Nanofabrication Facility on its Manassas Campus.
- NSF director Panchanathan, U.S. Sen. Young tout value of university-private sector partnerships to grow national, economic securityon April 29, 2024 at 9:52 am
“Purdue has a special connection with the National Science Foundation: from multiple Boilermakers leading the NSF in recent decades to a broad range of major NSF centers led by Purdue faculty,” said ...
- Research combines DNA origami and photolithography to move one step closer to molecular computerson April 24, 2024 at 4:05 pm
Large-scale, low-defect, accessible nanofabrication and assembly of the components remains elusive. Inspiration taken from living nature could change this status quo. Small prototypes of molecular ...
- Micro and Nanofabrication (MEMS)on January 22, 2023 at 6:21 am
Microfabrication and nanofabrication are the basis of manufacturing for nearly all modern miniaturized systems that are ubiquitously used in our daily life. Examples include; computer chips and ...
- Semiconductor and Nanofabrication Laboratoryon September 7, 2022 at 7:21 pm
The Semiconductor and Nanofabrication Laboratory provides state-of-the-art facilities and support for undergraduate and graduate programs in microelectronic engineering, microsystems, and related ...
- Nanofabrication Labon August 17, 2020 at 9:11 pm
The Nanofabrication Lab features a state-of-the-art, 4,200 ft2 Class 100 clean room equipped with over 40 pieces of process and analytical instrumentation for complex research projects that require ...
- Core Research Facilitieson August 17, 2020 at 3:07 pm
Search our database to locate instruments and services in atomic layer deposition, material characterization, mechanical properties, nanofabrication, nuclear magnetic resonance (NMR), photo ...
The Latest Google Headlines on:
Nanofabrication
[google_news title=”” keyword=”Nanofabrication ” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Manufacturing nanostructures
- NIL Technology raises €29 millionon May 13, 2024 at 6:04 am
NIL Technology (NILT), a Copenhagen-based flat optics company, has secured €29 million in funding from investors such as the Export & Investment Fund of ...
- Flat optics firm NIL Technology raises €29 M to scale manufacturingon May 9, 2024 at 8:15 am
Founded in Copenhagen, in 2006, NILT has been at the forefront of fabrication of advanced nanostructures and describes itself as being “vertically integrated within nanostructured flat optics – ...
- Industry, manufacturingon May 6, 2024 at 4:59 pm
Real (price adjusted) new orders in manufacturing were down 0.4% in March 2024 month on month after seasonal and calendar adjustment, according to provisional figures of the Federal Statistical Office ...
- Manufacturing in Mexico is having its moment. The US is buying in — and so is Chinaon April 28, 2024 at 6:40 pm
As US supply chains decouple from China, Mexico’s manufacturing sector is emerging as a winner. Manufacturing in Mexico is attractive for companies that experienced pandemic-era supply chain ...
- Scientists learn from caterpillars how to create self-assembling capsules for drug deliveryon April 26, 2024 at 8:16 am
Self-assembly is a cost-effective, environmentally sustainable and quick way of manufacturing nanostructures with critical applications in various industries, ranging from therapeutics to self ...
- What Recent Earnings Say About the State of Manufacturingon April 23, 2024 at 6:47 am
There was a time when the car manufacturing business was so important to the US economy that not only was the phrase "What's good for General Motors is good for America" coined, but those words ...
- Boeing and the Dark Age of American Manufacturingon April 19, 2024 at 4:59 pm
Boeing’s latest screwups vividly dramatize a point often missed in laments of America’s manufacturing decline: that when global economic forces carried off some U.S. manufacturers for good ...
- Industrial Production Boosts Manufacturing Activity: 5 Pickson April 18, 2024 at 6:40 am
The U.S. manufacturing sector is trying to make a solid rebound on higher demands which is driving production at factories. The rebound follows months of struggle for the manufacturing sector that ...
- US manufacturing output increases in March; February data revised higheron April 16, 2024 at 7:09 am
WASHINGTON, April 16 (Reuters) - Production at U.S. factories increased solidly in March as output at motor vehicle assembly plants and elsewhere rose, suggesting that manufacturing was turning ...
- US Industrial Production Rises Again on Boost From Manufacturingon April 16, 2024 at 6:44 am
US industrial production rose for a second month in March, boosted by a larger-than-expected increase in factory output as manufacturing shows further signs of stabilizing. The 0.4% increase in ...
The Latest Google Headlines on:
Manufacturing nanostructures
[google_news title=”” keyword=”manufacturing nanostructures” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]